2016-2026 Mazda Mx-5 SUV When Driving -> Rear Cross Traffic Alert (RCTA)* User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

When Driving -> Rear Cross Traffic Alert (RCTA)* for Your Mazda Mx-5 SUV Fourth Generation (2016-2026)

When Driving  
i-ACTIVSENSE  
Rear Cross Traffic Alert (RCTA)*  
The RCTA system is designed to assist the driver in checking the area to the rear of the  
vehicle on both sides while the vehicle is reversing by alerting the driver to the presence of  
vehicles approaching the rear of the vehicle.  
The RCTA system detects vehicles approaching from the rear left and right sides of the  
vehicle, and the rear of the vehicle while the vehicle is being reversed out of a parking  
space, and notifies the driver of possible danger using the Blind Spot Monitoring (BSM)  
warning indicator lights and the warning buzzer.  
Your vehicle  
Detection areas  
RCTA operation  
1. The RCTA system operates when the shift lever (manual transmission) or the selector  
lever (automatic transmission) is shifted to the reverse (R) position.  
2. If there is the possibility of a collision with an approaching vehicle, the Blind Spot  
Monitoring (BSM) warning indicator lights flashes and the warning beep is activated  
simultaneously.  
*Some models.  
4-98  
When Driving  
i-ACTIVSENSE  
(With rear view monitor)  
The RCTA warning indication in the rearview monitor also synchronizes with the Blind  
Spot Monitoring (BSM) warning indicator light on the door mirrors.  
(With rear view monitor)  
WARNING  
Always check the surrounding area visually before actually putting the vehicle in reverse:  
The system is only designed to assist you in checking for vehicles at the rear when putting the  
vehicle in reverse. Due to certain limitations with the operation of this system, the Blind Spot  
Monitoring (BSM) warning indicator lights may not ꢀash or it might be delayed even though  
a vehicle is behind your vehicle. Always make it your responsibility as a driver to check the  
rear.  
NOTE  
In the following cases, the Blind Spot Monitoring (BSM) OFF Indicator Light turns on  
and operation of the system is stopped. If the Blind Spot Monitoring (BSM) OFF Indicator  
Light remains illuminated, have the vehicle inspected at an Authorized Mazda Dealer as  
soon as possible.  
Some problem with the system including the Blind Spot Monitoring (BSM) warning  
indicator lights has occurred.  
A large deviation in the installation position of a radar sensor (rear) on the vehicle has  
occurred.  
There is a large accumulation of snow or ice on the rear bumper near a radar sensor  
(rear).  
Driving on snow-covered roads for long periods.  
The temperature near the radar sensors becomes extremely hot due to driving for long  
periods on slopes during the summer.  
4-99  
When Driving  
i-ACTIVSENSE  
The battery voltage has decreased.  
Under the following conditions, the radar sensors (rear) cannot detect target objects or it  
may be difficult to detect them.  
The vehicle speed when reversing is about 10 km/h (6.3 mph) or faster.  
The radar sensor (rear) detection area is obstructed by a nearby wall or parked vehicle.  
(Reverse the vehicle to a position where the radar sensor detection area is no longer  
obstructed.)  
Your vehicle  
A vehicle is approaching directly from the rear of your vehicle.  
Your vehicle  
The vehicle is parked at an angle.  
Your vehicle  
Directly after the Blind Spot Monitoring (BSM) system becomes operable using the  
personalization feature.  
Radio wave interference from a radar sensor equipped on a nearby parked vehicle.  
In the following cases, it may be difficult to view the illumination/flashing of the Blind  
Spot Monitoring (BSM) warning indicator lights equipped on the door mirrors.  
Snow or ice adheres to the door mirrors.  
The door glass is fogged or covered in snow, frost or dirt.  
Turn off the RCTA system while pulling a trailer or while an accessory such as a bicycle  
carrier is installed to the rear of the vehicle. Otherwise, the radio waves emitted by the  
radar will be blocked causing the system to not operate normally.  
4-100  

Related Topics

Popular Owner Manuals