When Driving
Switches and Controls
NOTE
Windshield Wipers and
Washer
The ignition must be switched ON to use
the wipers.
If an indicator light stays on without
flashing or if it flashes abnormally, one
of the turn signal bulbs may be burned
out.
A personalized function is available to
change the turn indicator sound volume.
(page 9-9)
WARNING
Use only windshield washer ꢀuid or plain
water in the reservoir:
Lane-Change Signals
▼
Move the lever halfway toward the
direction of the lane change―until the
indicator flashes― and hold it there. It
will return to the off position when
released.
Using radiator antifreeze as washer ꢀuid is
dangerous. If sprayed on the windshield, it
will dirty the windshield, aꢁect your
visibility, and could result in an accident.
Only use windshield washer ꢀuid mixed
with anti-freeze protection in freezing
weather conditions:
Three-Flash Turn Signal
▼
After releasing the turn signal lever, the
turn signal indicator flashes 3 times. The
operation can be canceled by moving the
lever in the direction opposite to which it
was operated.
Using windshield washer ꢀuid without
anti-freeze protection in freezing weather
conditions is dangerous as it could freeze
on the windshield and block your vision
which could cause an accident. In addition,
make sure the windshield is suꢂciently
warmed using the defroster before
spraying the washer ꢀuid.
NOTE
The three-flash turn signal function can be
switched to operable/inoperable using the
personalization function.
Refer to Personalization Features on page
9-9.
4-51
English 
