2006-2014 Nissan Qashqai SUV Instruments and controls User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and controls for Your Nissan Qashqai SUV First Generation (2006-2014)

2 Instruments and controls  
Meters and gauges.................................................. 2-2  
Rear fog light...................................................... 2-27  
Speedometer...................................................... 2-2  
Fuel gauge ......................................................... 2-2  
Tachometer ........................................................ 2-2  
Engine coolant temperature gauge...................... 2-2  
Warning/indicator lights and audible reminders ........ 2-3  
Checking bulbs .................................................. 2-3  
Warning lights .................................................... 2-3  
Indicator lights.................................................... 2-7  
Audible reminders............................................... 2-9  
Vehicle information display....................................... 2-11  
Warnings and alerts............................................ 2-12  
Odometer/twin trip odometer.............................. 2-16  
Brightness control .............................................. 2-16  
Trip computer..................................................... 2-16  
Settings menu .................................................... 2-18  
Cruise control/Speed limiter indicator (where  
fitted).................................................................. 2-21  
Wiper and washer switch ........................................ 2-21  
Windscreen........................................................ 2-22  
Rear window ...................................................... 2-23  
Defogger switch ...................................................... 2-23  
Rear window defogger ....................................... 2-23  
Outside mirror defogger (where fitted)................ 2-24  
Headlight and turn signal switch............................... 2-24  
Xenon headlights (where fitted)........................... 2-24  
Headlight switch................................................. 2-24  
Turn signal switch............................................... 2-26  
Fog light switch ....................................................... 2-26  
Front fog light (where fitted)................................ 2-26  
Headlight aiming control .......................................... 2-27  
Headlight aiming control switch (where fitted) ..... 2-27  
Automatic aiming control (xenon headlights)........ 2-27  
Headlight cleaner (where fitted) ............................... 2-28  
Hazard warning flasher switch ................................. 2-28  
Horn........................................................................ 2-29  
Seat heating (where fitted)....................................... 2-29  
Power outlet ............................................................ 2-30  
Storage ................................................................... 2-31  
Storage trays...................................................... 2-31  
Glove box........................................................... 2-31  
Console box ....................................................... 2-32  
Cup holders ....................................................... 2-32  
Bottle holder....................................................... 2-32  
Map pocket (where fitted)................................... 2-32  
Seat pocket (where fitted)................................... 2-32  
Roof rail (where fitted) ........................................ 2-32  
Rear parcel shelf (where fitted) ................................ 2-33  
Tonneau cover (where fitted).................................... 2-33  
Windows................................................................. 2-34  
Power windows.................................................. 2-34  
C-View® glass roof (where fitted)............................ 2-36  
Sunshade operation............................................ 2-36  
System reinitialisation.......................................... 2-37  
Interior lights............................................................ 2-37  
Front Room light................................................. 2-37  
Map lights (where fitted) ..................................... 2-38  
Rear room/reading light ...................................... 2-38  
Luggage compartment light ................................ 2-38  
Downloaded from manuals search engine  
Vanity mirror light (where fitted)........................... 2-38  
Downloaded from manuals search engine  
METERS AND GAUGES  
NOTE  
mation display and the Low fuel indicator light  
comes on in the combination meter when the  
fuel level is getting low. Refuel as soon as it is  
convenient. There should be a small reserve of  
fuel in the tank when the fuel gauge needle  
reaches the empty level.  
ENGINE COOLANT TEMPERATURE  
GAUGE  
For an overview see “Instrument and control  
layout” in the “0. Illustrated table of contents”  
section and see “Meters and gauges” in the “0. Il-  
lustrated table of contents” section.  
The gauge indicates the engine coolant tempera-  
ture. The engine coolant temperature should remain  
within the normal range j2 .  
SPEEDOMETER  
The engine coolant temperature varies with the out-  
side air temperature and driving conditions.  
CAUTION  
Refill the fuel tank before the gauge registers  
empty.  
CAUTION  
If the gauge exceeds the normal range, stop as  
soon as safely possible. If the engine is over-  
heated, continued operation of the vehicle may  
seriously damage the engine see “Engine  
overheat” in the “6. In case of emergency” sec-  
tion for immediate action.  
TACHOMETER  
NIC1561  
WARNING  
Allow the engine to cool down before removing  
the radiator cap to avoid the danger of being  
scalded.  
The speedometer indicates the vehicle speed (km/h  
or MPH). Scale resolution on the meter varies with  
models.  
NIC1563  
FUEL GAUGE  
The tachometer indicates the engine speed in revo-  
lutions per minute (r/min). Do not rev the engine  
into the red zone j1 .  
The fuel gauge is active when the ignition switch is  
in the ON position.  
The gauge may move slightly during braking, turn-  
ing, acceleration, or when going up– or downhill.  
Scale resolution on the meter varies with models.  
CAUTION  
The  
c symbol indicates that the fuel filler lid is  
When the engine speed approaches the red zone,  
shift to a higher gear. Operating the engine in the  
red zone may cause serious engine damage.  
located on the right side of the vehicle.  
NOTE  
A low fuel warning comes on in the vehicle infor-  
2-2 Instruments and controls  
Downloaded from manuals search engine  
WARNING/INDICATOR LIGHTS AND AUDIBLE REMINDERS  
Anti-lock Braking System (ABS) warning  
light (orange)  
Seat belt (driver and front passenger) warn-  
ing light (red)  
Low fuel indicator light (orange)  
Slip indicator light (orange)  
Supplemental Restraint System (SRS) air  
bag warning light (red)  
Brake warning light (red)  
Charge warning light (red)  
Water in fuel filter warning light (orange)  
4WD warning light (orange)  
Front fog light indicator light (green)  
Rear fog light indicator light (orange)  
Diesel Particulate Filter (DPF) warning light  
(orange)  
Electronic Power Assisted Steering (EPAS)  
warning light (red)  
Automatic Transmission check indicator light  
(AT models) (orange)  
High beam indicator light (blue)  
Continuously Variable Transmission (CVT)  
indicator light (orange)  
Engine oil pressure/level warning light (red)  
Dipped beam indicator light (green)  
Front passenger air bag deactivated (OFF)  
warning light (red)  
Electronic Stability Programme (ESP) OFF  
indicator light (orange)  
Side light and headlight indicator light  
(green)  
Malfunction warning light (red)  
Malfunction Indicator light (orange)  
4WD mode indicator light (AUTO) (green)  
4WD mode indicator light (LOCK) (orange)  
SPORT mode indicator light  
Master warning light (orange)  
Trailer direction indicator light (green)  
Glow plug indicator light (Diesel engine)  
(orange)  
NATS security warning light (red)  
Turn signal/hazard indicator lights (green)  
,
,
,
,
,
,
,
CHECKING BULBS  
WARNING LIGHTS  
,
,
,
, (  
M9R engine  
With all doors closed, apply the handbrake, fasten  
the seat belts and turn the ignition switch to the ON  
position without starting the engine. The following  
lights (where fitted) will come on:  
Also see “Vehicle information display” later in this  
section.  
only)  
If any light fails to come on, it may indicate a burned-  
out bulb or an open circuit in the electrical system.  
Have the system checked, and repaired promptly by  
a NISSAN dealer or qualified workshop.  
Anti-lock Braking System (ABS)  
warning light  
,
,
,
,
,
After turning the ignition switch to the ON position,  
the light will illuminate. The anti-lock braking system  
warning light will turn off after approximately 2 sec-  
onds if the system is operational.  
The following lights (where fitted) come on briefly  
and then go off:  
Instruments and controls 2-3  
Downloaded from manuals search engine  
If the light comes on while the engine is running, it  
may indicate that the anti-lock portion of the braking  
system is not functioning properly. Have the system  
checked by a NISSAN dealer or qualified workshop.  
If the vehicle continues to be driven at a low  
speed with the DPF warning light illuminated,  
the fail-safe will limit engine revolutions and/  
or torque. In this case, the engine oil must be  
replaced and the process of burning accumu-  
lated particulate matter must be carried out  
by a NISSAN dealer or qualified workshop.  
Service regeneration is a maintenance item  
and is not covered by the NISSAN warranty.  
•
•
WARNING  
Driving your vehicle could be dangerous. Have  
it towed to the nearest NISSAN dealer or quali-  
fied workshop.  
•
•
Brake warning light  
Depressing the brake pedal with the engine  
stopped could increase your stopping dis-  
tance and require greater pedal travel dis-  
tance and effort.  
This light functions for both the handbrake and the  
footbrake systems.  
Handbrake indicator:  
Use engine oil for DPF equipped models. For  
details, see “Capacities and recommended  
fuel/lubricants” in the “9. Technical  
information” section.  
Charge warning light  
The light comes on when the handbrake is applied.  
Low brake fluid warning:  
If the light comes on while the engine is running, it  
may indicate that the charging system is not func-  
tioning properly. Turn the engine off and check the  
alternator belt. If the belt is loose, broken, missing  
or if the light remains on, see a NISSAN dealer or  
qualified workshop immediately.  
The light warns of a low brake fluid level. If the light  
comes on while the engine is running with the hand-  
brake not applied, stop the vehicle and perform the  
following procedure:  
CAUTION  
The DPF becomes extremely hot after burning  
particulate matter.  
1. Check the brake fluid level. Add brake fluid as  
necessary. See “Brake and clutch fluid” in the  
“8. Maintenance and do-it-yourself” section.  
M9R engine only:  
CAUTION  
When the ignition switch is turned to the ON posi-  
tion, the Diesel Particulate Filter (DPF) warning light  
illuminates for a few seconds and then goes out.  
This indicates that the system is operational.  
Do not continue driving if the alternator belt is  
loose, broken or missing.  
WARNING  
Diesel Particulate Filter (DPF)  
warning light (where fitted)  
If the level is below the MIN (minimum) mark  
on the brake fluid reservoir, do not drive until  
the brake system has been checked at a  
NISSAN dealer or qualified workshop.  
All diesel engines:  
NISSAN GREEN PROGRAM  
WARNING  
Some diesel engine models are fitted with a Diesel  
Particulate Filter (DPF), which is a device that re-  
moves carbon (soot) from the exhaust gas. To oper-  
ate effectively, the DPF system must routinely con-  
duct a cleaning operation, called regeneration, that  
Be careful not to burn yourself with exhaust  
gases.  
•
2. If the brake fluid level is correct:  
Have the warning system checked by a NISSAN  
dealer or qualified workshop.  
Do not park the vehicle over flammable mate-  
rials such as dry grass, waste paper or rags,  
as they may burn easily.  
•
2-4 Instruments and controls  
Downloaded from manuals search engine  
burns-off the accumulated carbon. This regenera-  
tion process is normally automatic and not visible to  
the driver.  
Electronic Power Assisted  
Steering (EPAS) warning light  
Engine oil pressure warning light  
This light warns of low engine oil pressure. If the  
light flickers or comes on during normal driving, or  
stays on once the engine is started, pull off the road  
at a safe area, stop the engine immediately and call  
a NISSAN dealer or qualified workshop.  
When the ignition switch is turned to the ON posi-  
tion, the EPAS warning light illuminates. This means  
the system is operational.  
Regeneration restrictions:  
Driving conditions such as frequent short journeys  
or stop/start driving can result in excessive build up  
of carbon in the filter. When this happens the DPF  
warning light will illuminate (and a message will ap-  
pear in the vehicle information display, see “Vehicle  
information display” later in this section) to inform  
you that the vehicle must be driven in a particular  
manner to begin regeneration.  
If the warning light remains illuminated after the en-  
gine has been started, there will be no power steer-  
ing assistance: the vehicle may be driven using the  
mechanical steering system although it is not rec-  
ommended as the effort required to turn the steer-  
ing wheel will be significantly increased compared  
to normal operation.  
CAUTION  
Running the engine with the engine oil pressure  
warning light on could cause serious damage to  
the engine.  
NOTE  
When the DPF warning light is illuminated, provided  
that legal and safety conditions allow, the vehicle  
should be driven at a speed of over 60 km/h (37.5  
MPH) until the DPF warning light turns off. This pro-  
cess can take up to 30 minutes to complete.  
The [Оil lеvеl lоw] message indication is dis-  
played for 5 seconds after the ignition switch has  
been turned to the ON position. See “Vehicle in-  
formation display” later in this section.  
WARNING  
If the EPAS warning light illuminates while  
driving, stop as soon as safely possible.  
•
In certain circumstances, factors external to  
•
If regeneration fails:  
Front passenger air bag  
deactivated (OFF) warning light  
the EPAS system may contribute to the illumi-  
nation of the warning light. If the warning light  
illuminates, stop the vehicle as soon as safely  
possible if driving, turn the ignition switch to  
the “OFF” position for approximately 20 sec-  
onds and then turn the ignition switch to the  
ON position again. If the light remains illumi-  
nated, we recommend that you contact a  
NISSAN dealer or qualified workshop.  
Failure to react to the DPF warning light may lead to  
saturation of the DPF system. If this happens the  
Malfunction Indicator (MI)  
cating that a Service Regeneration by a NISSAN  
dealer or qualified workshop is required. The engine  
speed may also be limited to 3,000 rpm to protect  
the DPF system.  
When the ignition switch is turned to the ON posi-  
tion the front passenger air bag deactivated (OFF)  
will illuminate indi-  
warning light  
, located in the combination  
meter, illuminates for approximately 7 seconds and  
then goes off. This means the system is operational.  
The light warns of front passenger air bag status. If  
the front passenger air bag has been deactivated,  
the light comes on and stays on as long as the front  
passenger air bag switch remains in the OFF posi-  
tion.  
NOTE  
See “Power steering system” in the “5. Starting and  
driving” section for further details on the EPAS sys-  
tem.  
Contact a NISSAN dealer or qualified workshop  
to perform a forced regeneration.  
Instruments and controls 2-5  
Downloaded from manuals search engine  
need servicing and the vehicle must be taken to the  
nearest NISSAN dealer or qualified workshop if the  
SRS air bag warning light:  
Malfunction warning light (red)  
(where fitted)  
NATS security warning light  
(where fitted)  
When the ignition switch is turned to the ON posi-  
tion, the malfunction warning light illuminates. This  
means the system is operational.  
This light blinks whenever the ignition switch is in  
the LOCK, “OFF” or Acc position. This function  
indicates that your vehicle is equipped with the  
NISSAN Anti-Theft System (NATS)*.  
Remains on after approximately 7 seconds  
•
•
•
Flashes intermittently  
See “Malfunction Indicator light” later in this section  
for details of the orange Malfunction Indicator light.  
Does not come on at all  
If NATS is malfunctioning, this light will remain on  
while the ignition switch is in the ON position.  
Unless checked and repaired, the SRS air bag sys-  
tem and pre-tensioner seat belts may not function  
properly.  
If the red malfunction warning light comes on steady  
while the engine is running, it may indicate an en-  
gine control system malfunction.  
For additional information, see “Security system”  
later in this section.  
For additional details see “Air bag warning light” in  
the “1. Safety — seats, seat belts and supplemental  
restraint system” section.  
Have your vehicle inspected by a NISSAN dealer or  
qualified workshop. You do not need to have your  
vehicle towed to the dealer.  
* Immobilizer  
Seat belt (driver and front  
passenger) warning light  
4WD warning light (4WD  
models)  
CAUTION  
The seat belt warning light alerts the driver if their  
seat belt or that of the front passenger is not se-  
curely fastened. The light will come on when the  
ignition switch is turned to the ON position. It will go  
out when both the driver and front passenger (if  
occupied) seat belts have been securely fastened.  
Continued vehicle operation without having the  
engine control system checked and repaired as  
necessary could lead to poor driveability,  
reduced fuel economy and possible damage to  
the engine control system, which may affect your  
warranty coverage.  
The 4WD warning light comes on when the ignition  
switch is turned to the ON position. It turns off soon  
after the engine is started.  
If the 4WD system malfunctions or the revolution or  
radius of the front and the rear wheels differs, the  
warning light will either remain illuminated or blink.  
See “Four-wheel Drive (4WD) (where fitted)” in the  
“5. Starting and driving” section.  
A seat belt reminder chime is also fitted, see “Seat  
belt reminder chime” later in this section.  
Incorrect setting of the engine control system may  
lead to non-compliance of local and national emis-  
sion laws and regulations.  
Supplemental Restraint System  
(SRS) air bag warning light  
CAUTION  
Master warning light  
If the warning light comes on or blinks while  
When the ignition switch is in the ON or START  
position, the Supplemental Restraint System (SRS)  
air bag warning light will illuminate. The SRS air bag  
warning light will turn off after approximately 7 sec-  
onds if the system is operational.  
•
driving, 4WD mode will change to 2WD mode.  
Reduce the vehicle speed and have your ve-  
hicle checked by a NISSAN dealer or qualified  
workshop as soon as possible.  
The master warning light is displayed when any  
warning message is displayed. See “Vehicle infor-  
mation display” later in this section.  
The air bag systems and pre-tensioner seat belts  
2-6 Instruments and controls  
Downloaded from manuals search engine  
Do not drive on dry, hard surfaced roads in  
the LOCK position.  
CAUTION  
•
•
Continuously Variable  
Transmission (CVT) indicator  
light (CVT models)  
Failure to drain the water from the fuel filter can  
cause serious damage to the engine. Contact a  
NISSAN dealer or qualified workshop as soon as  
possible.  
If the 4WD warning light blinks in the follow-  
ing sequence while driving, proceed as in-  
structed:  
This light comes on briefly when the ignition is turned  
to the ON position.  
–
Blinks rapidly (about twice a second)  
INDICATOR LIGHTS  
If the CVT light comes on during normal operation,  
it may indicate that something is wrong with the  
Continuously Variable Transmission (CVT). Have  
your system checked by a NISSAN dealer or quali-  
fied workshop.  
Pull off the road at a safe place and idle  
the engine. The driving mode will change  
to 2WD to prevent the 4WD system from  
malfunctioning. The vehicle can be driven  
again as soon as the warning light turns  
off.  
Automatic transmission check  
indicator light (AT models)  
This light indicates both the “Automatic transmis-  
sion oil temperature warning” and the “Fail-safe op-  
eration”.  
NOTE  
A CVT ELECTRONIC CONTROL SYSTEM WARN-  
ING display (centre console — where fitted) will  
come on when a malfunction may have occurred  
to the transmission control system. The selected  
Detailed Information key will then recommend  
going to a NISSAN dealer for the system to be  
checked.  
Automatic transmission oil temperature  
warning:  
–
Blinks slowly (about once every 2 seconds)  
Change the driving mode to 2WD and re-  
duce the vehicle speed as soon as safely  
possible.  
This light comes on when the automatic transmis-  
sion oil temperature is too high. If the light comes on  
while driving, reduce the vehicle speed as soon as  
safely possible until the light turns off.  
If the warning light is still on after performing the  
above operation, have the system checked by a  
NISSAN dealer or qualified workshop as soon as  
possible.  
Fail-safe operation:  
Electronic Stability Program  
(ESP) OFF indicator light  
(where fitted)  
When the ignition switch is turned ON, the light  
comes on for 2 seconds. If the light blinks, it may  
indicate the automatic transmission is not function-  
ing properly. Have your NISSAN dealer or qualified  
workshop check and repair the transmission.  
Water in fuel filter warning light  
(where fitted)  
The light comes on when the Electronic Stability  
Programme (ESP) OFF switch is pushed to the OFF  
position. This indicates that the ESP system is not  
operating.  
If the warning light remains on or flashes irregularly  
while the engine is running, there may be water in  
the fuel filter. Should this happen, try to drain the  
water from the fuel filter, see “Fuel filter (Diesel en-  
gine models)” in the “8. Maintenance and  
do-it-yourself” section.  
CAUTION  
Continued vehicle operation when the automatic  
transmission check warning light is on may dam-  
age the automatic transmission.  
This light also comes on briefly when the ignition  
switch is turned to the ON position. The light will  
turn off after approximately 1 second if the ESP sys-  
tem is operational.  
Instruments and controls 2-7  
Downloaded from manuals search engine  
When the ESP OFF indicator light and SLIP indica-  
tor light come on with the ESP system turned on, it  
alerts the driver to the fact that the system’s fail-safe  
mode is operating. This means that the system may  
not be functioning properly. Have the system  
checked by your NISSAN dealer or qualified work-  
shop.  
On steady (orange):  
Glow plug indicator light (Diesel  
engines)  
An engine malfunction has been detected. Have the  
vehicle inspected by a NISSAN dealer or qualified  
workshop. You do not need to have your vehicle  
towed to the dealer.  
This light comes on when the ignition switch is in the  
ON position and goes out when the glow plugs have  
been pre-heated. When the engine is cold, the glow  
plug warm-up time will be longer.  
Blinking (orange) (where fitted):  
An engine misfire has been detected which may  
damage the engine control system.  
Low fuel indicator light  
If an abnormality occurs in the system, the ESP sys-  
tem function will be cancelled, but the vehicle is still  
driveable. For additional information, see “Electronic  
Stability Programme (ESP) system (where fitted)” in  
the “5. Starting and driving” section.  
When the fuel level is getting low, the low fuel warn-  
ing light will switch on to alert the driver. Refuel as  
soon as it is convenient. There should be a small  
reserve of fuel in the tank when the fuel gauge  
reaches the empty level. See also “Vehicle informa-  
tion display” later in this section.  
To reduce or avoid engine control system dam-  
age:  
Do not drive at speeds above 70 km/h (43  
MPH).  
•
4WD mode indicator light  
(AUTO) (4WD models)  
Avoid hard acceleration or deceleration.  
•
•
•
This light comes on briefly when the ignition is turned  
to the ON position. If the engine is running, this light  
will illuminate when the 4WD AUTO mode is se-  
lected.  
Malfunction Indicator light  
Avoid steep uphill grades.  
If possible, reduce the load being carried or  
towed.  
When the ignition switch is turned to the ON posi-  
tion, the orange Malfunction Indicator light illumi-  
nates. This means that the system is operational.  
The Malfunction Indicator light may stop blinking  
and come on steady.  
See “Four-wheel Drive (4WD) (where fitted)” in the  
“5. Starting and driving” section.  
If the orange Malfunction Indicator light comes on  
steady or blinks (where fitted) while the engine is  
running, it may indicate an engine control system  
malfunction.  
Have the vehicle inspected by a NISSAN dealer or  
qualified workshop. You do not need to have your  
vehicle towed to the dealer.  
4WD mode indicator light  
(LOCK) (4WD models)  
This light comes on briefly when the ignition is turned  
to the ON position.  
CAUTION  
See “Malfunction warning light (red) (where fitted)”  
earlier in this section for details of the red malfunc-  
tion warning light (where fitted).  
Continued vehicle operation without having the  
engine control system checked and repaired as  
necessary could lead to poor driveability,  
reduced fuel economy and possible damage to  
the engine control system, which may affect your  
warranty coverage.  
If the engine is running, this light and the 4WD mode  
indicator light (AUTO) will be lit when the 4WD  
LOCK mode is selected.  
See “Four-wheel Drive (4WD) (where fitted)” in the  
“5. Starting and driving” section.  
2-8 Instruments and controls  
Downloaded from manuals search engine  
SLIP indicator light  
(where fitted)  
Side light and headlight indicator AUDIBLE REMINDERS  
light  
Door open reminder chime  
The SLIP indicator blinks when the Electronic Sta-  
bility Programme (ESP) system is operating, thus  
alerting the driver to the fact that the road surface is  
slippery and the vehicle is nearing its traction limits.  
This light comes on when the side light or headlight  
position is selected. See “Headlight and turn signal  
switch” later in this section for further details.  
The chime will sound if any door other than the driv-  
er’s door is left open and the power door lock switch  
is held down.  
SPORT mode indicator light  
(where fitted)  
Intelligent Key models: The external buzzer will  
sound if the vehicle is being locked remotely or us-  
ing an outside door lock switch and any door is  
open.  
You may feel or hear the system working, this is nor-  
mal.  
The SPORT mode indicator light illuminates when  
the SPORT mode is turned ON. See “SPORT mode  
switch” in the “5. Starting and driving” section for  
the use of the SPORT mode switch.  
The light will continue to blink for a few seconds  
after the ESP system stops limiting wheel spin.  
Handbrake reminder buzzer  
Front fog light indicator light  
(where fitted)  
A buzzer will sound when driving away if the hand-  
brake has not been released.  
Trailer direction indicator light  
The light comes on when the front fog lights are  
switched on.  
Light reminder chime  
The light will light up whenever an additional electri-  
cal load is detected by the direction indicator sys-  
tem.  
A chime will sound for 10 seconds if the driver’s  
door is opened while the external lights are turned  
on and the ignition switch is in the “OFF” or LOCK  
position.  
Rear fog light indicator light  
For additional information, see “Trailer towing” in  
the “5. Starting and driving” section.  
The light comes on when the rear fog light is  
switched on.  
See “Headlight and turn signal switch” later in this  
section for further details on the headlight operation.  
Turn signal/hazard indicator  
lights  
High beam indicator light  
Fog light reminder chime  
This light comes on when the headlight high beam  
is on and goes out when the low beam is selected.  
The direction indicator lights will flash when the turn  
signal switch or hazard warning flasher switch is  
turned on. See “Headlight and turn signal switch”  
later in this sectionand see “Hazard warning flasher  
switch” later in this section for further details.  
A chime will sound if the ignition switch is in the  
“OFF” or LOCK position and the headlight switch is  
in the AUTO position (where fitted) and the fog lights  
are left on.  
Dipped beam indicator light  
This light comes on when the switch is turned to the  
See “Headlight and turn signal switch” later in this  
section for further details.  
position:  
The headlights will come on and front  
side, tail, number plate and instrument lights remain  
on.  
Instruments and controls 2-9  
Downloaded from manuals search engine  
Seat belt reminder chime  
A chime will sound for approximately 90 seconds if  
the vehicle’s speed exceeds 15 km/h (9 MPH) and  
the driver’s seat belt or front passenger’s seat belt,  
if occupied is not securely fastened. See “Ignition  
knob warning (Intelligent Key models)” later in this  
section.  
Key reminder buzzer (Intelligent Key  
models)  
The external buzzer will beep 3 times if:  
The Intelligent Key is removed from the vehicle  
while the ignition is not in the LOCK position.  
•
The vehicle is being locked remotely or using an  
outside door lock switch and the Intelligent Key  
has been left inside the vehicle.  
•
Park reminder chime (AT or CVT  
models)  
A chime will sound if the ignition switch is turned to  
LOCK and the gear selector lever is not in the P  
(Park) position.  
2-10 Instruments and controls  
Downloaded from manuals search engine  
VEHICLE INFORMATION DISPLAY  
Gear shift indicator (where fitted), see  
(P. 5-16)  
j6  
Stop/Start system indicator (where fitted), see  
(P. 5-21)  
switch/shaft (Settings control and trip  
computer control)  
j7  
j8  
switch/shaft (Twin trip odometer control  
and brightness level control)  
WARNING  
Operating the vehicle information display  
while driving can lead to a crash resulting in  
serious injuries or death. Always park the ve-  
hicle in a safe place before operating the dis-  
play screen.  
•
•
Look at the display screen only briefly while  
driving. Keep your eyes on the road. Inatten-  
tive driving may lead to a crash resulting in  
serious injuries or death.  
NIC1645  
Outside temperature (P. 2-19)  
Clock (P. 2-19)  
Speed limiter (P. 5-31)  
j1  
j2  
j3  
Settings menu (P. 2-18)  
Intelligent Key operation (P. 2-6)  
Odometer (P. 2-16)  
Warnings and alerts (P. 2-12)  
Trip computer (P. 2-16)  
j4  
j5  
Engine oil level information (P. 2-15)  
Cruise control (P. 5-29)  
Twin trip odometer (P. 2-16)  
Instruments and controls 2-11  
Downloaded from manuals search engine  
WARNINGS AND ALERTS  
The design of the warnings and alerts may differ  
depending on the model.  
j1 Door open warning  
This warning appears if any of the doors are open or  
not closed securely. The vehicle icon indicates  
which door is open on the display.  
j2 Back door open warning  
This warning appears if the back door is open or not  
closed securely. When the door is to be left open,  
e.g. when you transport a long load, push the  
switch or the steering wheel switch ji (where fit-  
ted) to confirm.  
j3 Seat belt warning (Rear seat or 2nd  
row)  
The seat belt warning indicates the seating position  
when the ignition switch is turned to the ON position  
and disappears when:  
All related seat belts have been securely fas-  
tened.  
•
The  
switch or the steering wheel switch ji  
•
•
(where fitted) is pushed.  
Approximately 35 seconds after engine start.  
WARNING  
Seat belts for 3rd row seats (where fitted) are not  
part of the seat belt warning light monitoring sys-  
tem.  
NIC1644  
2-12 Instruments and controls  
Downloaded from manuals search engine  
For more information, see “Seat belts” in the  
“1. Safety — seats, seat belts and supplemental  
restraint system” section  
The emergency key can only be removed at  
the LOCK position. Make sure the ignition  
knob is in the LOCK position before removing  
the emergency key.  
•
j8 Intelligent Key detection warning  
If the Intelligent Key is taken outside of the vehicle  
ID recognition zone while the ignition knob is in the  
Acc or ON position, the Intelligent Key detection  
warning will be displayed and a buzzer will sound.  
The Intelligent Key detection warning disappears  
when the Intelligent Key is placed back in the pas-  
senger compartment.  
j4 Ignition knob warning (Intelligent Key  
models)  
See “Steering lock” in the “5. Starting and driving”  
section for further details.  
The warning appears when the ignition knob is left  
in the Acc or “OFF” position instead of completely  
being turned to the LOCK position.  
j5 Steering wheel lock warning  
The warning appears when the ignition knob is  
pressed, but not turned to the Acc or “OFF” posi-  
tion within a short period. Move the steering wheel  
to release the lock and turn the ignition knob to Acc  
or ON. The warning will turn off in approximately 5  
seconds.  
The message also appears when you try to start the  
vehicle if the Intelligent Key is not detected within  
the vehicle.  
If this warning appears, turn the ignition knob to the  
LOCK position.  
When the ignition knob is in the ON position, a  
buzzer will sound twice and the ignition knob warn-  
ing shows when the ignition knob is turned to the  
Acc or “OFF” position. This is to warn the driver that  
the ignition knob is not in the LOCK position.  
For more information, see “Integrated keyfob/re-  
mote control system” in the “3. Pre-driving checks  
and adjustments” section.  
See “Steering lock” in the “5. Starting and driving”  
section for further details.  
j9 Intelligent Key low battery warning  
MT models:  
j6 Brake/Clutch warning (where fitted)  
The Intelligent Key low battery warning may show if  
a low battery voltage is detected when the ignition  
knob is turned from “OFF” to the ON position.  
Depress the ignition PUSH release button and turn  
the ignition knob to the LOCK position.  
When starting your vehicle, it is necessary to oper-  
ate the brake (CVT and AT models) or clutch pedal  
(MT models).  
For more information, see “Integrated keyfob/Intel-  
ligent Key battery replacement” in the “8. Mainte-  
nance and do-it-yourself” section.  
AT or CVT models:  
For more information, see “Starting the engine” in  
the “5. Starting and driving” section.  
Make sure the gear selector lever is in the P (Park)  
position and then turn the ignition switch to the  
LOCK position.  
j10 Intelligent Key system fault warning  
CAUTION  
j7 Handbrake reminder  
See “Ignition knob (where fitted)” in the “5. Starting  
and driving” section for further details.  
The reminder will come on if the handbrake is on  
whilst the vehicle is being driven.  
If the Intelligent Key system fault warning comes  
on, it may indicate a system malfunction. We rec-  
ommend that you contact a NISSAN dealer or  
qualified workshop for repair.  
CAUTION  
A buzzer will also sound.  
The steering wheel can only be locked when  
•
the ignition knob is in the LOCK position. Make  
sure the ignition knob is in the LOCK position  
before leaving the vehicle.  
Instruments and controls 2-13  
Downloaded from manuals search engine  
For more information, see “Integrated keyfob/re-  
mote control system” in the “3. Pre-driving checks  
and adjustments” section.  
CAUTION  
j17 Diesel Particulate Filter warning  
(where fitted)  
The engine oil level check is not designed to indi-  
cate a low oil level. Use the dipstick to check the  
oil level.  
See “Diesel Particulate Filter (DPF) (where fitted)”  
in the “5. Starting and driving” section for further  
details.  
j11 Intelligent Key convenience mode alert  
The Intelligent Key convenience mode alert shows  
to confirm that convenience mode has been acti-  
vated. See “Switching from Convenience mode to  
Anti-hijack mode” in the “3. Pre-driving checks and  
adjustments” section.  
See “Engine oil” in the “8. Maintenance and  
do-it-yourself” section.  
j18 Setting menu operation alert  
The alert shows when you try to operate the setting  
menu while driving. The setting menu can only be  
entered if the vehicle is stationary.  
j14 Engine oil level  
This display provides a visual representation of the  
engine oil level.  
j12 Intelligent Key anti–hijack alert  
j19 Maintenance due alert (where fitted)  
j15 Engine oil level low  
The Intelligent Key anti–hijack alert shows to con-  
firm that anti-hijack mode has been activated. See  
“Switching from Convenience mode to Anti-hijack  
mode” in the “3. Pre-driving checks and  
adjustments” section.  
This alert shows that maintenance is due. The mes-  
sage is shown until the steering wheel switch ji  
(where fitted) is pressed. When the maintenance  
due alert reaches 0 km (miles), the  
flashes next to the odometer value.  
If the oil level is not sufficient for driving, the [Oil  
level low] message appears. Oil needs to be added  
before driving.  
symbol  
CAUTION  
j13 Engine oil level information  
When turning the ignition to the ON position, the oil  
message indicates the oil level.  
The engine oil level should be checked regularly.  
Operating with an insufficient amount of oil can  
damage the engine and such damage is not cov-  
ered by the warranty.  
CAUTION  
The engine oil must be changed before the main-  
tenance due alert is shown.  
The [Oil level OK] message indicates the oil level is  
sufficient for driving. Push the  
steering wheel switch ji (where fitted) when the  
[Oil level OK] message shows to see a more de-  
tailed oil level. (See Oil level j14 )  
–
Failure to do so risks causing damage to the  
engine.  
Park the vehicle at a safe location as soon as pos-  
sible and fill the engine with the recommended en-  
gine oil.  
switch or the  
–
Continued driving after maintenance due alert  
reaches 0 km (miles) may result in reduced  
engine performance. The engine malfunction  
indicator light (orange) will illuminate.  
For checking the engine oil level and adding oil, see  
“Engine oil” in the “8. Maintenance and  
do-it-yourself” section.  
NOTE  
The [Oil level OK] message indication is dis-  
played after the ignition switch has been turned  
to the ON position and other warnings have been  
shown.  
–
The DPF (where fitted) may also become satu-  
rated because regeneration is restricted once  
the distance equals 0 km (miles)  
j16 Engine oil sensor warning  
Please visit your local NISSAN dealer or qualified  
workshop if this warning appears.  
Always visit a NISSAN dealer or qualified work-  
shop to perform the maintenance and the reset.  
2-14 Instruments and controls  
Downloaded from manuals search engine  
However reset is possible (only after the oil was  
changed) using the [Service] menu item in the  
[Settings] menu. See “[Maintenance]” later in this  
section  
j23 Low temperature warning  
Stop/Start System (where fitted)  
If, during driving, the temperature falls below 4ºC  
this alert will appear to indicate low outside air tem-  
perature. You can switch the low temperature warn-  
ing [On] or [Off]. See “[Units]” later in this section  
For more information, see “Stop/Start System  
(where fitted)” in the “5. Starting and driving” sec-  
tion  
Have the vehicle inspected by a NISSAN dealer  
or qualified workshop if these conditions occur.  
j26 Engine stop:  
CAUTION  
If the engine stops when the Stop/Start System is  
activated, the message is shown.  
j20 Distance to maintenance alert  
(where fitted)  
Even if the alert is not on, there is no guarantee  
that the road is free of hazards caused by in-  
clement weather.  
j27 Auto start deactivation:  
This alert reminds when maintenance is due in the  
shown distance. The alert is shown for 10 seconds  
at ignition ON, when the distance to the next main-  
tenance interval is below 5000 km (3100 Miles).  
The message is shown until the steering wheel  
switch ji (where fitted) is pressed.  
If the engine stops when the Stop/Start System is  
activated, and will not start automatically, the mes-  
sage is shown.  
NOTE  
The outside air temperature sensor is located at  
the front of the vehicle. At low speeds the sensor  
can be affected by engine heat, heat reflected  
from the road surface and exhaust from other  
vehicles, these influences can cause the display  
to be inaccurate. To compensate, the outside air  
temperature display is designed to react slowly  
to increasing temperatures, but quickly to falling  
temperatures.  
j28 System fault:  
If the Stop/Start System is activated, but does not  
operate correctly, the message is shown. Visit a  
NISSAN dealer or qualified workshop.  
NOTE  
Visit a NISSAN dealer or qualified workshop  
•
before the maintenance due alert j19 reaches  
0 km (miles) to perform maintenance (oil  
change).  
Activating or deactivating using the Stop/Start  
System OFF switch:  
Using the Stop/Start System OFF switch activates  
or deactivates the Stop/Start System. This is shown  
in the vehicle information display:  
The maintenance interval will reduce faster  
with certain types of driving, especially at low  
speeds in urban conditions.  
•
j24 Low fuel warning  
This warning appears when the fuel level in the tank  
is getting low. Refuel as soon as it is convenient,  
preferably before the fuel gauge reaches the empty  
position. For more information, see “Fuel gauge”  
earlier in this section.  
j29 : The Stop/Start System OFF switch is  
pushed to the “ON” position.  
j21 Tyre change alert  
You can set a distance for changing tyres. See  
“[Maintenance]” later in this section  
j30 : The Stop/Start System OFF switch is pushed to  
the “OFF” position.  
j22 Maintenance alert  
j25 Driver alert  
You can set a distance for a non specific mainte-  
nance item. See “[Maintenance]” later in this sec-  
tion  
This warning appears when the previously set time  
for a break is reached. You can set the time for up  
to 6 hours in the setting menu. (See “Settings menu”  
later in this section.)  
Instruments and controls 2-15  
Downloaded from manuals search engine  
The trip computer is controlled using the  
or the steering wheel switch ji (where fitted).  
switch  
ODOMETER/TWIN TRIP ODOMETER  
BRIGHTNESS CONTROL  
Rotate the  
switch jC anticlockwise to brighten  
The trip computer contains the following items:  
or clockwise to dim the instrument lighting level.  
[Fuel Economy] → [Average speed] → [Driving dis-  
tance] → [Elapsed time] → [Range] (km or MILES)  
→ [Settings][→ CO2 Saved] (where fitted) → [Fuel  
Economy]  
NOTE  
Brightness cannot be set when the headlight  
switch is in the OFF position.  
TRIP COMPUTER  
Short press to change the information that is  
being displayed.  
•
NIC1542  
Push and hold (up until 3 seconds) resets the  
current item that is displayed (except [Settings]  
and [Range]).  
•
The odometer and twin trip odometer are displayed  
when the ignition switch is in the ON position.  
Push and hold over 3 seconds performs a global  
reset. This resets all functions of the display (ex-  
cept [Range] and Trip A).  
•
Odometer  
The odometer jA records the total distance the ve-  
hicle has been driven.  
j1 Fuel Economy (l (litre)/100 km or  
MPG)  
Twin trip odometer  
The [Fuel Economy] mode shows the current fuel  
consumption in a moving bar graph.  
The twin trip odometer jB records the distance of 2  
individual trips (Trip A and Trip B).  
The average fuel consumption mode displays the  
average fuel consumption since the last reset.  
Changing the display:  
Briefly press the  
play as follows.  
switch jC to change the dis-  
It is shown in 2 ways:  
The Ø symbol (average) with the value on the  
•
Trip A → Trip B→ Trip A  
top right of the bar.  
Resetting the trip odometer:  
By the position of the ♦ icon (diamond) inside  
the bar.  
•
Press and hold the  
switch for approximately 1  
second to reset the selected trip (Trip A or Trip B).  
NIC1650  
2-16 Instruments and controls  
Downloaded from manuals search engine  
For more information, see “Settings menu” later in  
this section.  
j2 Average speed  
The [Average speed] mode shows the average ve-  
hicle speed since the last reset.  
j7 CO2 saved (where fitted)  
Estimated quantity of CO2 exhaust emissions pre-  
vented by Stop/Start System shown every time the  
engine is automatically stopped.  
j3 Driving distance  
The [Driving distance] mode shows the distance  
driven since the last reset.  
For more information, see “Stop/Start System  
(where fitted)” in the “5. Starting and driving” sec-  
tion  
j4 Elapsed time  
The [Elapsed Time] mode shows the time since the  
last reset.  
j5 Range (km or MILES)  
The [Range] mode provides you with an estimation  
of the distance that can be driven before refuelling  
(distance to empty). The range is constantly being  
calculated, based on the amount of fuel in the fuel  
tank and the actual fuel consumption.  
When the fuel level gets close to empty, the range  
will change to “----”.  
If the amount of fuel added is small, the display  
just before the ignition switch is turned to the  
“OFF” position may continue to be displayed.  
•
When driving uphill or corners, the fuel in the  
tank shifts, this may momentarily change the dis-  
play.  
•
j6 Settings  
The [Settings] item is only displayed when using the  
switch to control the trip computer.  
Rotate the  
switch to enter the [Settings] menu  
Instruments and controls 2-17  
Downloaded from manuals search engine  
Petrol models  
Diesel models  
jA  
jB  
SETTINGS MENU  
Select the [Settings] menu in the trip computer then  
rotate the  
Use the  
switch to enter the Settings menu.  
switch to select and set the items.  
NOTE  
Settings cannot be changed while driving.  
NIC1708  
2-18 Instruments and controls  
Downloaded from manuals search engine  
To return to the previous screen of the setting mode,  
select [Back].  
[Units]  
The following items can be set to your preference.  
[Temperature]  
•
Select this submenu to choose from degrees  
Celsius (C) or Fahrenheit (F) on the display.  
[Dist./Fuеl]  
•
The fuel consumption units can be set too.  
Select this submenu to choose:  
–
–
–
distance in miles, fuel consumption in MPG  
distance in km, fuel consumption in km/l  
distance in km, fuel consumption in l/100km  
To return to the previous screen of the setting mode,  
select [Back].  
[Alarms]  
Alerts can be set to notify the following items.  
NIC1647  
[Driver Alert]  
•
Select this submenu to set the [Driver Alert] pe-  
riod.  
[On] or [Off]  
•
•
[Clock]  
Select this submenu to set the clock display On  
or Off.  
Clock adjustment can be set to:  
[Outside temp]  
•
[Set Clock]  
•
Select this submenu to set the low temperature  
alert [On] or [Off].  
[24/12 Нr]  
Adjust the time (hour and minute) of the clock on  
Select this submenu to set the 12h/24h time dis-  
play mode.  
the meter by rotating the  
switch.  
To return to the top page of the setting mode, select  
[Back].  
Push the switch to set the values  
Instruments and controls 2-19  
Downloaded from manuals search engine  
3) Select [Confirm] to confirm the reset of the  
distance driven information to zero.  
[Stop/Start] (where fitted)  
[Maintenance]  
The CO2 savings and the engine stop time using  
the Stop/Start System are kept in a submenu.  
The maintenance intervals of the following remind-  
ers can be set or reset:  
For Diesel models jB :  
1) Select [Service].  
[Trip Saving]  
[Service] for engine oil change service reminder  
•
•
2) Press the  
switch for more than 2 sec-  
View the estimated CO2 exhaust emissions pre-  
vented since last reset.  
Select this submenu to view, or reset the dis-  
tance driven information or to set an interval  
(petrol models).  
onds, then release.  
3) Select [Reset].  
It is possible to reset using the [Reset CO2]  
submenu then push the  
switch to set to zero.  
–
View the distance driven information:  
Select [Service].  
4) Select [Confirm] to confirm the reset proce-  
dure.  
NOTE  
Alternatively while the oil service message is  
displayed (where fitted):  
–
Set procedure (petrol models only jA ):  
The [Trip Saving] value is the same informa-  
tion that is displayed when the engine is auto-  
matically stopped by the Stop/Start System.  
1) Select [Service].  
After changing the engine oil: Turn the igni-  
tion switch to ON and, while the oil service  
message is displayed within 3 seconds, push  
2) Select the distance driven/interval informa-  
tion.  
[Total Saving]  
View:  
•
both the  
and  
switches at the same  
3) Turn the  
switch and set the interval (mile-  
time for more than 5 seconds.  
age) accordingly. For interval (mileage) de-  
tails, see the separately provided Warranty  
Information and Maintenance booklet.  
–
The estimated CO2 exhaust emissions pre-  
vented.  
The display goes blank for 1 second; the de-  
fault interval is then displayed; and finally the  
display returns to normal.  
–
The time that the engine has been stopped  
by the Stop/Start System.  
4) Short press the  
interval (mileage).  
switch to confirm the set  
[Tyre]  
•
•
NOTE  
–
Reset procedure after changing engine oil.  
Select this submenu to set or reset the distance  
for replacing tyres.  
The [Total Saving] values cannot be reset  
and show accumulated Stop/Start System  
information since the vehicle was built.  
CAUTION  
[Other]  
Do not perform the reset operation unless  
the engine oil has been changed.  
For more information, see “Stop/Start System  
(where fitted)” in the “5. Starting and driving” sec-  
tion.  
Select this submenu and set or reset the dis-  
tance for replacing or checking other items.  
For Petrol models jA :  
To return to the previous page of the setting mode,  
select [Back].  
1) Select [Service].  
2) Select [Reset].  
2-20 Instruments and controls  
Downloaded from manuals search engine  
WIPER AND WASHER SWITCH  
For more information, contact your NISSAN dealer  
or qualified workshop.  
CRUISE indicator disappears. When the  
CRUISE indicator is displayed, the cruise con-  
trol system is operational.  
WARNING  
In freezing temperatures the washer fluid may  
freeze on the windscreen and obscure your vi-  
sion. Warm the windscreen with the defroster  
before you wash it.  
[Language]  
The cruise control SET indicator is displayed  
while the vehicle speed is controlled by the cruise  
control system. If the SET indicator blinks while  
the engine is running, it may indicate that the  
cruise control system is not functioning properly.  
Have the system checked by an NISSAN dealer  
or qualified workshop.  
Select the submenu to set the desired language of  
the display  
CAUTION  
[Factory]  
Select the submenu to reset the factory settings of  
the display.  
Do not open/release the bonnet when the  
front wiper arms are raised from their original  
position.  
•
NOTE  
For more details, see “Cruise control (where  
fitted)” in the “5. Starting and driving” section.  
Do not operate the washer continuously for  
more than 15 seconds.  
•
When resetting [Factory], all previous settings  
made are changed to default.  
The LIMIT indicator is displayed when the speed  
limiter main “ON/OFF” switch is pushed. When  
the main switch is pushed again, the LIMIT indi-  
cator disappears.  
•
Do not operate the washer if the reservoir  
tank is empty or frozen.  
•
CRUISE CONTROL/SPEED LIMITER  
INDICATOR (where fitted)  
When the LIMIT indicator is displayed, the speed  
limiter is operational. The speed limiter is active,  
when the SET indicator is displayed.  
For more details, see “Speed limiter” in the  
“5. Starting and driving” section.  
When the trip computer was set before using the  
cruise control or speed limiter function, the trip com-  
puter menu item jA is shown together with the  
cruise control or speed limiter. See “Trip computer”  
earlier in this section  
NIC1550  
The CRUISE indicator is displayed when the  
cruise control main “ON/OFF” switch is pushed.  
When the main switch is pushed again, the  
•
Instruments and controls 2-21  
Downloaded from manuals search engine  
Lever position j1 : Intermittent (  
) or AUTO.  
WINDSCREEN  
Rain sensor (where fitted)  
AUTO (where fitted) operates the rain-sensing auto  
wiper system. (See “Rain sensor (where fitted)” later  
in this section.).  
The rain sensor is activated when the AUTO posi-  
tion j1 of the wiper switch is selected.  
The wiper will start to operate automatically at a suit-  
able speed when rain is detected on the windscreen.  
— The intermittent operation speed can be adjusted  
by rotating the ring forward jA (slower) or back-  
ward jB (faster).  
The sensitivity of the rain sensing system can be  
adjusted by rotating the ring of the wiper switch for-  
ward jA – less sensitive, or backward jB – more  
sensitive.  
— The wiper operation speed will vary (where fit-  
ted) in accordance with the vehicle speed. For ex-  
ample, when the vehicle speed is high, the intermit-  
tent operation speed will be faster.  
NIC1471  
NOTE  
Intermittent (without rain sensor)  
Lever position Low (  
speed operation  
) j2 – for continuous low  
The rain sensor is only intended for use during  
rain or precipitation. During other weather condi-  
tions no harm will come to the rain sensor sys-  
tem if left active (wiper switch set to AUTO), al-  
though occasional unexpected activation of the  
wipers may occur.  
Lever position High (  
speed operation  
) j3 – for continuous high  
Washer operation  
Pull the lever toward you j5 to operate the washer.  
For every fifth operation of the wiper and washer,  
the headlight washing system (where fitted) will be  
activated to clean the headlights. The headlight  
washing system is only activated while the headlight  
NIC1469  
AUTO (with rain sensor)  
switch is in the  
position. See “Headlight  
cleaner (where fitted)” later in this section.  
The windscreen wiper and washer can be operated  
when the ignition switch is in the ON position.  
Wiper drip wipe system (where fitted):  
The wiper will also operate once about 3 seconds  
after the washer and wiper are operated. This op-  
eration is to wipe washer fluid that has dripped on  
the windscreen.  
Wiper operation  
Move the lever up or down to operate the wiper at  
the following speeds:  
Lever position Up j4 — for a single sweep opera-  
tion of the wiper.  
2-22 Instruments and controls  
Downloaded from manuals search engine  
DEFOGGER SWITCH  
To operate the rear window washer, push the switch  
towards the front of the vehicle j3 . The rear win-  
dow wiper will also operate.  
REAR WINDOW  
REAR WINDOW DEFOGGER  
NOTE  
When the windscreen wiper switch is in either  
the intermittent or AUTO (where fitted), low or  
high speed position and the vehicle’s gear lever  
is set in Reverse, the rear window wiper comes  
on (where fitted).  
Wiper drip wipe system (where fitted)  
NIC1472  
NIC1326Z  
The wiper will also operate once about 3 seconds  
after the washer and wiper are operated. This op-  
eration is to wipe washer fluid that has dripped on  
the windscreen.  
To defog/defrost the rear window glass, start the  
engine and push the (Type A or Type B) switch in.  
The indicator light will come on. Push the switch  
again to turn the defogger off.  
WARNING  
In freezing temperatures the washer solution  
may freeze on the rear window and obscure your  
vision. Warm the rear window with the rear win-  
dow defogger before you wash the rear window.  
The defogger will turn off automatically after ap-  
proximately 15 minutes — if the rear window clears  
before this time, push the switch again to turn the  
defogger off.  
CAUTION  
Do not operate the washer continuously for  
more than 15 seconds.  
•
CAUTION  
Do not operate the washer if the reservoir  
tank is empty or frozen.  
•
When cleaning the inner side of the rear window,  
be careful not to scratch or damage the electri-  
cal conductors.  
The rear window wiper and washer can be oper-  
ated when the ignition switch is in the ON position.  
NOTE  
Turn the switch clockwise to the intermittent (  
,
When the air conditioner, or rear defogger is  
turned on the Stop/Start System will not be acti-  
vated (For models with the Stop/Start System).  
j1 ) position or continuous (  
, j2 ) position to  
operate the wiper.  
Instruments and controls 2-23  
Downloaded from manuals search engine  
HEADLIGHT AND TURN SIGNAL  
SWITCH  
will become reddish. If one or more of the above  
signs occur, contact a NISSAN dealer or quali-  
fied workshop.  
OUTSIDE MIRROR DEFOGGER  
(where fitted)  
XENON HEADLIGHTS (where fitted)  
WARNING  
The outside rear-view mirrors will be defogged when  
the defogger switch is activated.  
NISSAN recommends you to consult the local regu-  
lations concerning the use of lights.  
HIGH VOLTAGE  
When xenon headlights are on, they produce  
•
HEADLIGHT SWITCH  
a high voltage. To prevent an electric shock,  
never attempt to modify or disassemble. Al-  
ways have your xenon headlights replaced at  
an authorised NISSAN dealer or qualified  
workshop.  
Xenon headlights provide considerably more  
•
light than conventional headlights. If they are  
not correctly aimed, they might temporarily  
blind an oncoming driver or the driver ahead  
of you and cause a serious accident. If head-  
lights are not aimed correctly, immediately  
take your vehicle to a NISSAN dealer or quali-  
fied workshop and have the headlights ad-  
justed correctly.  
NIC1302Z  
Lighting  
Turn the switch to the  
m
position:  
When the xenon headlight is initially turned on, its  
brightness or colour varies slightly. However, the  
colour and brightness will soon stabilise.  
j1 The front side, tail, number plate and instru-  
ment lights will come on. The indicator light  
The life of xenon headlights will be shortened by  
•
m
in the instrument panel will come on.  
frequent on-off operation. It is generally desir-  
able not to turn off the headlights for short inter-  
vals (for example, when the vehicle stops at a  
traffic signal).  
Turn the switch to the m position:  
j2 The headlights will come on and all the  
other lights remain on.  
If the xenon headlight bulb is close to burning  
out, the brightness will drastically decrease, the  
light will start blinking, or the colour of the light  
•
CAUTION  
Never leave the light switch on for extended peri-  
ods of time while the engine is not running.  
2-24 Instruments and controls  
Downloaded from manuals search engine  
To activate the autolight system:  
Daytime light system (where fitted)  
“Friendly Lighting”  
1. Turn the headlight switch to the AUTO position  
Even if the headlight switch is off, the headlight low  
beam, front side, rear combination and number plate  
lights will come on after starting the engine. How-  
ever, you cannot change low beam to high beam  
when the light switch is off.  
The “Friendly Lighting” function is a convenience  
facility. It allows you to provide lighting from the  
vehicle after the ignition switch has been turned to  
the LOCK position and the headlight switch is in the  
OFF or AUTO (where fitted) position. Pulling the  
headlight switch toward you once will activate the  
headlight for approximately 30 seconds. After that  
period of time, it will automatically switch off.  
j1 .  
2. Turn the ignition switch to ON.  
To disable the autolight system:  
Turn the switch to the OFF,  
or  
position.  
When the light switch is turned to the  
the headlight low beam will turn off.  
position,  
Headlight beam select  
Autolight system (AUTO — where fitted)  
It is possible to pull the headlight switch up to four  
times to increase the lighting period up to 2 minutes.  
NOTE  
The “Friendly Lighting” function can be cancelled  
by switching the ignition switch to the Acc or ON  
position again.  
Battery save function  
The battery save feature prevents your vehicle from  
discharging the battery after you have left the exter-  
nal lights, map lamps or room lamps on when exit-  
ing the vehicle. This occurs when the ignition switch  
or ignition knob is in the “OFF” or LOCK position.  
NIC1304Z  
NIC1303Z  
To select the high beam when in the  
posi-  
j1  
tion, push the lever forward. The high beam  
The autolight system allows the headlights to be set  
so they turn on and off automatically. When active,  
the autolight system will:  
lights come on and the  
illuminates.  
indicator light  
NOTE  
Pull the lever back to select the low beam  
The next time the engine is started the external  
lights, map lamps or room lamp will come on  
again  
j2  
j3  
Turn on the headlights, front side, tail, number  
plate and instrument panel lights automatically  
when it gets dark.  
•
(
position).  
Pulling the lever towards you will flash the  
headlight high beam, even when the headlight  
switch is off.  
Turn off all the lights when it gets light.  
•
Instruments and controls 2-25  
Downloaded from manuals search engine  
FOG LIGHT SWITCH  
Battery save function for external lights:  
Lane change signal  
FRONT FOG LIGHT (where fitted)  
If the ignition switch is turned to the “OFF” position  
but the external lights are accidentally left on, the  
external lights will automatically be switched off as  
soon as the driver’s door is opened.  
Move the lever only part of the way up or down j1  
to signal a lane change (right or left). The indicator  
lights will flash three times before cancelling auto-  
matically.  
It is possible to leave the external lights on perma-  
nently by switching them back on using the head-  
light switch while the ignition switch is still in the  
LOCK or “OFF” position. In this case, the light re-  
minder chime will sound when the driver’s door is  
opened.  
Direction indicator  
Move the lever up or down j2 to indicate right or  
left. When the turn is completed, the turn signal is  
automatically cancelled.  
Battery save function for interior light:  
The interior light will automatically be switched off  
after approximately 15 minutes if it has been acci-  
dentally left on.  
TURN SIGNAL SWITCH  
NIC1307  
Type A  
Type B  
jA  
jB  
NIC1384Z  
The front fog lights should only be used when visibil-  
ity is seriously reduced – generally, to less than 100  
m (328 ft).  
Turn the headlight switch to the  
or  
posi-  
2-26 Instruments and controls  
Downloaded from manuals search engine  
HEADLIGHT AIMING CONTROL  
tion and turn the fog light switch to the  
position  
NOTE  
HEADLIGHT AIMING CONTROL  
SWITCH (where fitted)  
j1 . The front fog lights and indicator light will come  
on. For additional information, see “Warning/indica-  
tor lights and audible reminders” earlier in this sec-  
tion.  
If the headlight switch is turned from the  
position, the rear fog light will switch off auto-  
matically.  
Type jB (with front fog lights)  
To turn the rear fog light on:  
To turn the front fog lights off, turn the fog light  
switch to the OFF position.  
1. Turn the headlight switch to the  
position.  
or  
REAR FOG LIGHT  
The rear fog light should only be used when visibility  
is seriously reduced – generally, to less than 100 m  
(328 ft).  
2. Turn the fog light switch to the  
position  
j2 :  
NIC1424  
–
–
The rear and front fog lights and both indicator  
lights will come on  
Type jA (without front fog lights)  
To turn the rear fog light on:  
Depending on the number of occupants in the ve-  
hicle and the load it is carrying, the headlight axis  
may be higher than desired. If the vehicle is travel-  
ling on a hilly road, the headlights may directly hit the  
rear-view mirror of the vehicle ahead or the wind-  
screen of an oncoming vehicle. The light axis can be  
lowered using the switch located on the driver’s  
side of the instrument panel, next to the steering  
wheel.  
The fog light switch will return to the  
position  
1. Turn the headlight switch to the  
2. Turn the fog light switch to the  
position.  
j1  
position j1 :  
To turn the rear fog light off:  
–
–
The rear fog light and indicator light will come on  
Turn the fog light switch to the  
again:  
position j2  
The fog light switch will return to the “OFF” posi-  
tion ( — )  
–
The rear fog light and indicator light will switch  
off  
To turn the rear fog light off:  
The higher the number designated on the switch,  
the lower the axis.  
–
The fog light switch will return to the  
position  
Turn the fog light switch to the  
position j1 again:  
–
The rear fog light and indicator light will switch  
NOTE  
When travelling with no heavy load on a flat road,  
select position 0.  
off  
If the headlight switch is turned to the OFF posi-  
tion, the rear fog light will switch off automati-  
cally.  
–
The fog light switch will return to the “OFF” posi-  
AUTOMATIC AIMING CONTROL  
(xenon headlights)  
tion ( — )  
For additional information, see “Warning/indicator  
lights and audible reminders” earlier in this section.  
Vehicles with xenon headlights are equipped with  
an automatic levelling system. The headlight axis is  
controlled automatically.  
Instruments and controls 2-27  
Downloaded from manuals search engine  
HEADLIGHT CLEANER  
(where fitted)  
HAZARD WARNING FLASHER  
SWITCH  
NISSAN recommends consulting local regulations  
on the use of lights.  
To clean the headlights, pull the windscreen washer  
switch towards you while the headlight switch is in  
the  
position and the ignition switch is in the ON  
position.  
NOTE  
The headlight cleaner will automatically operate  
every fifth operation of the wiper and washer  
switch.  
See “Wiper and washer switch” earlier in this sec-  
tion  
NIC1519  
CAUTION  
Push the switch on to warn other drivers when you  
must stop or park under emergency conditions. All  
direction indicator lights will flash.  
Do not operate the cleaner continuously for  
more than 15 seconds.  
•
Do not operate the cleaner if the washer fluid  
reservoir is empty or frozen.  
•
See “Window washer fluid/headlight cleaner fluid  
(where fitted)” in the “8. Maintenance and  
do-it-yourself” section for details on refilling the res-  
ervoir tank.  
2-28 Instruments and controls  
Downloaded from manuals search engine  
HORN  
SEAT HEATING (where fitted)  
4. The seat heater switches illuminate when either  
heat setting is selected and will remain on as  
long as the switch is on.  
5. When the vehicle’s interior has warmed-up, or  
before you leave the vehicle, be sure to turn the  
seat heater system off.  
CAUTION  
Do not use the seat heater system for a long  
period of time when the engine is not running,  
otherwise the battery could run down.  
•
NIC1352Z  
NIC1429  
Do not put anything on the seat that insulates  
the heat, such as a blanket, cushion, seat  
cover, etc. Otherwise, the seat may overheat.  
•
To sound the horn, push the centre pad area j1 of  
the steering wheel.  
The front seats are warmed by built-in heaters.  
The switches are located on the centre console and  
can be operated independently from each other (jA  
for the left-hand side seat, jB for the right-hand side  
seat).  
Do not place anything hard or heavy on the  
seat or pierce it with a pin or similar object.  
This may damage the heater.  
•
1. Turn the ignition switch to the ON position.  
Any liquid spilled on a heated seat should be  
removed immediately with a dry cloth.  
•
NOTE  
The seat heater can only be activated when  
the ignition switch is in the ON position.  
When cleaning the seat, never use benzine,  
thinner or any similar materials.  
•
2. Start the engine.  
If any abnormalities are found or the heating  
•
does not operate, turn off the switch and have  
the system checked by a NISSAN dealer or  
qualified workshop.  
3. Select the heat range:  
Press the forward part of the switch (large  
dot) to activate the “HIGH” heat setting.  
•
Press the rear part of the switch (small dot) to  
activate the “LOW” heat setting.  
•
For no heat, the switch has a central “OFF”  
position between “HIGH” and “LOW”.  
•
Instruments and controls 2-29  
Downloaded from manuals search engine  
POWER OUTLET  
Do not use with accessories that exceed a 12  
volt, 120 W (10 A) power draw. Do not use  
double adaptors or more than one electrical  
accessory.  
•
•
Use this power outlet with the engine running  
(do not use for extended periods of time with  
the engine stopped or idling).  
Avoid using when the air conditioner, head-  
lights or rear window defogger are on.  
•
•
NIC1372Z  
When not in use, be sure that the cap is  
closed. Do not allow water to come into con-  
tact with the outlet.  
Front row  
Before inserting or disconnecting a plug, be  
sure to turn off the power switch of the elec-  
trical accessory being used or the Acc power  
of the vehicle.  
•
•
Fully push the plug in sufficiently. If sufficient  
contact is not made, the plug may overheat or  
the internal temperature fuse may blow.  
NIC1451  
2nd row (7-seater)  
WARNING  
Take care as the power outlet and plug may be  
hot during or immediately after use.  
CAUTION  
This power outlet is not designed for use with  
a cigarette lighter unit.  
•
2-30 Instruments and controls  
Downloaded from manuals search engine  
STORAGE  
(LHD) model. On the Right-Hand Drive (RHD)  
model, these components are located on the  
opposite side.  
WARNING  
Do not place sharp objects in the trays to help  
prevent injury in an accident or sudden stop.  
GLOVE BOX  
NIC1732  
WARNING  
NIC1734  
Keep the glove box lid closed while driving to  
help prevent injury in an accident or a sudden  
stop.  
Glove box, Cool box*, Sunglasses holder  
j6  
j7  
j8  
j9  
*
STORAGE TRAYS  
To open the glove box, lift the latch and lower the lid.  
Front cup holders  
Rear cup holders (5-seater)  
j1  
j2  
j3  
j4  
j5  
Cool box (where fitted)  
Seat pockets*  
Bottle holder  
When the engine is running and the air conditioning  
is switched on, cool air will enter the glove box  
through the opening as illustrated j1 .  
Rear cup holders (7-seater)  
where fitted  
Console box  
Map pocket  
The layout illustrated is for the Left-Hand Drive  
Storage trays*  
Instruments and controls 2-31  
Downloaded from manuals search engine  
CAUTION  
Sunglasses holder  
ROOF RAIL (where fitted)  
Avoid abrupt starting and braking when the  
•
WARNING  
cup holder is being used to prevent spillage.  
If the liquid is hot, it can scald you or your pas-  
senger.  
The sunglasses holder should not be used  
while driving so that full attention may be given  
to vehicle operation.  
•
Use only soft cups in the cup holder. Hard  
objects can injure you in an accident.  
•
Do not leave sunglasses in the sunglasses  
holder while parking in direct sunlight. The  
heat may damage the sunglasses.  
•
BOTTLE HOLDER  
CAUTION  
The glove box contains a sunglasses storage area,  
which is accessible when the glove box is open.  
NIC1452  
Do not use the bottle holder for any other  
•
objects that could be thrown about in the ve-  
hicle and possibly injure people during sud-  
den braking or an accident.  
Luggage can be carried on the roof by securing  
crossbars to the roof rail. Follow all crossbar manu-  
facturers instructions for installing and use of the  
crossbars. The roof rail is designed to carry loads  
(luggage plus crossbars) below 75 kg (165 lb).  
Overloading may cause damage to the vehicle.  
CONSOLE BOX  
WARNING  
Do not use the bottle holder for open liquid  
containers.  
•
The centre console box should not be used while  
driving so that full attention may be given to ve-  
hicle operation.  
MAP POCKET (where fitted)  
Map pockets are located in the doors.  
Pull the lid up to open the console box.  
SEAT POCKET (where fitted)  
CUP HOLDERS  
A seat pocket (where fitted) is located on the back  
or side of the driver and/or passenger seat.  
WARNING  
Cup holders should not be used while driving so  
that full attention may be given to vehicle opera-  
tion.  
To access the rear cup holders (where fitted), lower  
the centre armrest.  
2-32 Instruments and controls  
Downloaded from manuals search engine  
REAR PARCEL SHELF (where fitted)  
TONNEAU COVER (where fitted)  
WARNING  
Never put anything on the tonneau cover, no  
•
matter how small. Any object on it could cause  
an injury in case of an accident or if the brakes  
are applied suddenly.  
Do not leave the tonneau cover in position  
when it is disengaged from the grooves.  
•
Properly secure all cargo to help prevent it  
•
NPA838Z  
from sliding or shifting. Do not place cargo  
higher than the seatbacks. In a sudden stop  
or collision, unsecured cargo could cause per-  
sonal injury  
CAUTION  
WARNING  
Make sure the rear parcel shelf is carefully stored  
when not in use in order to prevent any damage.  
Never put anything on the rear parcel shelf, no  
matter how small. Any object on it could cause  
an injury in an accident or when the brakes are  
applied suddenly.  
The child restraint top tether strap may be  
•
damaged by contact with the tonneau cover  
or items in the luggage compartment area.  
Remove the tonneau cover from the vehicle  
or store it in its storage space. Also, secure  
any lose items in the luggage compartment.  
Your child could be seriously injured or killed  
in a collision if the top tether strap is dam-  
aged.  
Installation:  
1. Open the back door.  
Removal:  
2. Position the parcel shelf j3 over the rear seat-  
back fasteners j2 and push downwards until  
they “click” into place.  
1. Open the back door (see “Back door lock” ear-  
lier in this section).  
3. Attach the corresponding ropes to each side j1  
2. Detach both of the ropes (left and right) j1 from  
of the back door.  
the inside of the back door.  
The tonneau cover keeps the luggage compartment  
contents hidden from the outside. It can only be  
used when the 3rd row seats are folded down.  
4. Close the back door (see “Back door lock” ear-  
lier in this section).  
3. Detach the parcel shelf from the rear seatback  
fasteners j2 by carefully pulling the corners up-  
wards.  
4. Lift the parcel shelf j3 up and rotate horizontally  
to remove through the back door opening.  
Instruments and controls 2-33  
Downloaded from manuals search engine  
WINDOWS  
POWER WINDOWS  
The power window switches are located on the door  
panel and will only operate when the ignition switch  
is in the ON position.  
WARNING  
Make sure to remove the key from the ignition  
•
switch and take it with you when leaving the  
vehicle. If children are left unattended inside  
the vehicle they could unknowingly activate  
switches.  
NPA991  
NPA992  
Removal:  
Storage:  
Make sure that all passengers have their  
•
1) Pull the tonneau cover at the grip j1 slightly up  
1) Remove the luggage floor covers j1 , j2 and  
j3 .  
hands, etc. inside the vehicle while it is in  
motion and before closing the windows. Use  
the power window lock switch to prevent un-  
expected use of the power windows.  
and backward, then slide it forward.  
2) Push the sliding button j2 at the right hand side  
2) Fit the tonneau cover under the luggage com-  
partment floor in it’s storage space. Use the  
straps j4 at the right and left side.  
to disengage it from the groove.  
It is recommended to instruct all occupants in  
•
3) Then remove the tonneau cover j3 completely.  
the safe operation of power windows with par-  
ticular emphasis given to the safety and su-  
pervision of children.  
3) Replace the covers j1 , j2 and j3 .  
To fit the tonneau cover, first fit the left side, then at  
the right hand side, push it into the groove j2 until  
the stem engages.  
NIC1309Z  
Left hand drive models  
2-34 Instruments and controls  
Downloaded from manuals search engine  
To stop the window opening or closing, just push or  
pull the switch in the opposite direction.  
To activate the power window lock function, push  
the switch.  
Auto-reverse function:  
To cancel the power window lock function, push the  
switch again.  
When the control unit detects an object obstructing  
the driver’s side window, as it closes, the window  
will open automatically.  
System reinitialisation:  
The driver’s side main power window system will  
require reinitialisation whenever:  
The auto-reverse function remains active only when  
the driver’s side window is being closed automati-  
cally.  
The power window system does not function  
properly for example the auto-reverse function is  
not working.  
•
NIC1377Z  
Right hand drive models  
WARNING  
The battery cable is reconnected.  
Driver’s side main switch  
•
•
There are some areas immediately before the  
closed position where squeezing cannot be  
detected. Be careful not to pinch your fingers.  
•
The fuse is replaced.  
Driver’s side automatic window switch  
j1  
j2  
j3  
Perform the following procedure to initialise the  
power window system.  
Power window lock switch  
The auto-reverse function does not work  
when the window is closed manually (holding  
the switch in the close position).  
•
Passenger power window switches  
1. Turn the ignition switch to the ON position  
2. Close the door.  
The driver’s side control panel is equipped with  
switches to operate the passenger power windows  
and a power window lock switch.  
CAUTION  
3. Push down and hold the driver’s side window  
switch until the window glass is completely low-  
ered then release the switch.  
Depending on the environment or driving condi-  
tions, the auto-reverse function may be activated  
if an impact or load similar to something being  
caught in the window occurs.  
Automatic operation:  
WARNING  
4. In one continuous operation, pull up and hold  
the driver’s side window switch until the window  
glass is completely closed and continue holding  
the switch for a further 5 seconds.  
Make sure there is no obstruction when closing  
the driver’s side window using the driver’s side  
automatic window switch.  
Power window lock switch:  
Dependant on the vehicle specifications, when the  
power window lock function is activated, either:  
5. The system is now reinitialised.  
To fully open the driver’s side window, completely  
push down or pull up the driver’s side automatic  
window switch and release it; it does not need to be  
held. The window will automatically open or close all  
the way.  
the rear passenger window switches are dis-  
abled; or  
•
If the reinitialisation procedure cannot be performed  
successfully, take your vehicle to a NISSAN dealer  
or qualified workshop.  
the front and rear passenger window switches  
are disabled.  
•
Instruments and controls 2-35  
Downloaded from manuals search engine  
C-VIEW® GLASS ROOF  
(where fitted)  
SUNSHADE OPERATION  
The C-View® sunshade operates only when the ig-  
nition switch is in the ON position.  
WARNING  
Never allow hands or fingers, or any part of your  
body within operating range of the sunshade. You  
could be injured.  
NIC1425  
NIC1263Z  
Opening and closing  
Manual control:  
Open  
Close  
j1  
j2  
Passenger power window switches  
To open the sunshade press and hold the “OPEN”  
side of the switch j1 . To stop the sunshade from  
opening fully, release the switch.  
The passenger power window switches j4 operate  
the corresponding passenger window only.  
CAUTION  
To close the sunshade, press and hold the “CLOSE”  
side of the switch j2 . To stop the sunshade from  
closing fully, release the switch.  
To open or close the window, push and hold the  
switch down or up.  
Do not place heavy objects on the C-View®  
glass or surrounding area.  
•
•
To stop the window from opening or closing, simply  
release the switch.  
Do not hang from the sunshade or hang any  
objects from it. It may cause damage or de-  
formation to the sunshade.  
Automatic operation:  
To fully open or close the sunshade automatically,  
press briefly on the open or close side of the switch  
and then release. To stop the sunshade from open-  
ing or closing, press either side of the switch.  
Close the sunshade when you leave the ve-  
hicle for extended periods of time to prevent  
the inside of the vehicle from reaching high  
temperatures.  
•
Auto-reverse function:  
When the control unit detects something caught in  
the sunshade, the sunshade will open automatically.  
NOTE  
The auto-reverse function remains active  
whether the sunshade is being closed manually  
or automatically.  
2-36 Instruments and controls  
Downloaded from manuals search engine  
INTERIOR LIGHTS  
If the reinitialisation procedure cannot be performed  
successfully, take your vehicle to a NISSAN dealer  
or qualified workshop.  
CAUTION  
SYSTEM REINITIALISATION  
Do not use for extended periods of time with the  
engine stopped. This could discharge the bat-  
tery.  
The C-View® sunshade will require reinitialisation  
whenever:  
The sunshade system does not function prop-  
erly.  
•
NOTE  
The interior lights will go off after approximately  
15 minutes unless the ignition switch is in the  
Acc or ON position.  
The battery cable is reconnected.  
•
•
The fuse is replaced.  
Perform the following procedure to initialise the sun-  
shade system.  
FRONT ROOM LIGHT  
1. Make sure the vehicle battery is connected.  
2. Turn the ignition switch to the ON position.  
3. Press and hold the “CLOSE” side of the switch.  
The system will now proceed as follows:  
a. If open, the sunshade will start moving to the  
closed position.  
b. After a few seconds, the system will fully open  
the sunshade.  
NIC1573  
c. From the fully open position, it returns to the  
closed position.  
The room light has a three-position switch j1 .  
Position Lighting  
4. After reaching the closed position, release the  
sunshade switch.  
Light is always on  
m
Light comes on when a door is  
opened  
Light remains off  
5. The sunshade system is now reinitialised.  
“Middle”  
NOTE  
0
Do not disconnect the power for at least 2  
seconds.  
Instruments and controls 2-37  
Downloaded from manuals search engine  
Room light timer (where fitted)  
REAR ROOM/READING LIGHT  
VANITY MIRROR LIGHT (where fitted)  
The room light will stay on for approximately 30 sec-  
onds when:  
The ignition is switched off.  
•
•
•
The doors are unlocked.  
Any door is opened and then closed.  
The timer is cancelled, and the interior light will turn  
off when:  
NIC1258Z  
NIC1257Z  
The doors are locked.  
•
•
Room light (where fitted)  
The ignition switch is turned to the ON position.  
The light on the vanity mirror will turn on when the  
cover is opened.  
MAP LIGHTS (where fitted)  
To switch on the map light, press either  
or  
of  
the switches j2 .  
To turn the map light off, press 0  
NIC1256Z  
Reading light (where fitted)  
The light can be switched on or off by pressing the  
switch j3 .  
LUGGAGE COMPARTMENT LIGHT  
The light comes on automatically when the back  
door is opened.  
2-38 Instruments and controls  
Downloaded from manuals search engine  

Related Topics

Popular Owner Manuals