2006-2014 Nissan Qashqai SUV Instruments and controls -> Headlight switch User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and controls -> Headlight switch for Your Nissan Qashqai SUV First Generation (2006-2014)

HEADLIGHT AND TURN SIGNAL  
SWITCH  
will become reddish. If one or more of the above  
signs occur, contact a NISSAN dealer or quali-  
fied workshop.  
OUTSIDE MIRROR DEFOGGER  
(where fitted)  
XENON HEADLIGHTS (where fitted)  
WARNING  
The outside rear-view mirrors will be defogged when  
the defogger switch is activated.  
NISSAN recommends you to consult the local regu-  
lations concerning the use of lights.  
HIGH VOLTAGE  
When xenon headlights are on, they produce  
•
HEADLIGHT SWITCH  
a high voltage. To prevent an electric shock,  
never attempt to modify or disassemble. Al-  
ways have your xenon headlights replaced at  
an authorised NISSAN dealer or qualified  
workshop.  
Xenon headlights provide considerably more  
•
light than conventional headlights. If they are  
not correctly aimed, they might temporarily  
blind an oncoming driver or the driver ahead  
of you and cause a serious accident. If head-  
lights are not aimed correctly, immediately  
take your vehicle to a NISSAN dealer or quali-  
fied workshop and have the headlights ad-  
justed correctly.  
NIC1302Z  
Lighting  
Turn the switch to the  
m
position:  
When the xenon headlight is initially turned on, its  
brightness or colour varies slightly. However, the  
colour and brightness will soon stabilise.  
j1 The front side, tail, number plate and instru-  
ment lights will come on. The indicator light  
The life of xenon headlights will be shortened by  
•
m
in the instrument panel will come on.  
frequent on-off operation. It is generally desir-  
able not to turn off the headlights for short inter-  
vals (for example, when the vehicle stops at a  
traffic signal).  
Turn the switch to the m position:  
j2 The headlights will come on and all the  
other lights remain on.  
If the xenon headlight bulb is close to burning  
out, the brightness will drastically decrease, the  
light will start blinking, or the colour of the light  
•
CAUTION  
Never leave the light switch on for extended peri-  
ods of time while the engine is not running.  
2-24 Instruments and controls  
Downloaded from manuals search engine  
To activate the autolight system:  
Daytime light system (where fitted)  
“Friendly Lighting”  
1. Turn the headlight switch to the AUTO position  
Even if the headlight switch is off, the headlight low  
beam, front side, rear combination and number plate  
lights will come on after starting the engine. How-  
ever, you cannot change low beam to high beam  
when the light switch is off.  
The “Friendly Lighting” function is a convenience  
facility. It allows you to provide lighting from the  
vehicle after the ignition switch has been turned to  
the LOCK position and the headlight switch is in the  
OFF or AUTO (where fitted) position. Pulling the  
headlight switch toward you once will activate the  
headlight for approximately 30 seconds. After that  
period of time, it will automatically switch off.  
j1 .  
2. Turn the ignition switch to ON.  
To disable the autolight system:  
Turn the switch to the OFF,  
or  
position.  
When the light switch is turned to the  
the headlight low beam will turn off.  
position,  
Headlight beam select  
Autolight system (AUTO — where fitted)  
It is possible to pull the headlight switch up to four  
times to increase the lighting period up to 2 minutes.  
NOTE  
The “Friendly Lighting” function can be cancelled  
by switching the ignition switch to the Acc or ON  
position again.  
Battery save function  
The battery save feature prevents your vehicle from  
discharging the battery after you have left the exter-  
nal lights, map lamps or room lamps on when exit-  
ing the vehicle. This occurs when the ignition switch  
or ignition knob is in the “OFF” or LOCK position.  
NIC1304Z  
NIC1303Z  
To select the high beam when in the  
posi-  
j1  
tion, push the lever forward. The high beam  
The autolight system allows the headlights to be set  
so they turn on and off automatically. When active,  
the autolight system will:  
lights come on and the  
illuminates.  
indicator light  
NOTE  
Pull the lever back to select the low beam  
The next time the engine is started the external  
lights, map lamps or room lamp will come on  
again  
j2  
j3  
Turn on the headlights, front side, tail, number  
plate and instrument panel lights automatically  
when it gets dark.  
•
(
position).  
Pulling the lever towards you will flash the  
headlight high beam, even when the headlight  
switch is off.  
Turn off all the lights when it gets light.  
•
Instruments and controls 2-25  
Downloaded from manuals search engine  

Related Topics

Popular Owner Manuals