The trip computer is controlled using the
or the steering wheel switch ji (where fitted).
switch
ODOMETER/TWIN TRIP ODOMETER
BRIGHTNESS CONTROL
Rotate the
switch jC anticlockwise to brighten
The trip computer contains the following items:
or clockwise to dim the instrument lighting level.
[Fuel Economy] → [Average speed] → [Driving dis-
tance] → [Elapsed time] → [Range] (km or MILES)
→ [Settings][→ CO2 Saved] (where fitted) → [Fuel
Economy]
NOTE
Brightness cannot be set when the headlight
switch is in the OFF position.
TRIP COMPUTER
Short press to change the information that is
being displayed.
•
NIC1542
Push and hold (up until 3 seconds) resets the
current item that is displayed (except [Settings]
and [Range]).
•
The odometer and twin trip odometer are displayed
when the ignition switch is in the ON position.
Push and hold over 3 seconds performs a global
reset. This resets all functions of the display (ex-
cept [Range] and Trip A).
•
Odometer
The odometer jA records the total distance the ve-
hicle has been driven.
j1 Fuel Economy (l (litre)/100 km or
MPG)
Twin trip odometer
The [Fuel Economy] mode shows the current fuel
consumption in a moving bar graph.
The twin trip odometer jB records the distance of 2
individual trips (Trip A and Trip B).
The average fuel consumption mode displays the
average fuel consumption since the last reset.
Changing the display:
Briefly press the
play as follows.
switch jC to change the dis-
It is shown in 2 ways:
The Ø symbol (average) with the value on the
•
Trip A → Trip B→ Trip A
top right of the bar.
Resetting the trip odometer:
By the position of the ♦ icon (diamond) inside
the bar.
•
Press and hold the
switch for approximately 1
second to reset the selected trip (Trip A or Trip B).
NIC1650
2-16 Instruments and controls
Downloaded from manuals search engine