2006-2014 Nissan Qashqai SUV Instruments and controls -> Settings menu User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and controls -> Settings menu for Your Nissan Qashqai SUV First Generation (2006-2014)

Petrol models  
Diesel models  
jA  
jB  
SETTINGS MENU  
Select the [Settings] menu in the trip computer then  
rotate the  
Use the  
switch to enter the Settings menu.  
switch to select and set the items.  
NOTE  
Settings cannot be changed while driving.  
NIC1708  
2-18 Instruments and controls  
Downloaded from manuals search engine  
To return to the previous screen of the setting mode,  
select [Back].  
[Units]  
The following items can be set to your preference.  
[Temperature]  
•
Select this submenu to choose from degrees  
Celsius (C) or Fahrenheit (F) on the display.  
[Dist./Fuеl]  
•
The fuel consumption units can be set too.  
Select this submenu to choose:  
–
–
–
distance in miles, fuel consumption in MPG  
distance in km, fuel consumption in km/l  
distance in km, fuel consumption in l/100km  
To return to the previous screen of the setting mode,  
select [Back].  
[Alarms]  
Alerts can be set to notify the following items.  
NIC1647  
[Driver Alert]  
•
Select this submenu to set the [Driver Alert] pe-  
riod.  
[On] or [Off]  
•
•
[Clock]  
Select this submenu to set the clock display On  
or Off.  
Clock adjustment can be set to:  
[Outside temp]  
•
[Set Clock]  
•
Select this submenu to set the low temperature  
alert [On] or [Off].  
[24/12 Нr]  
Adjust the time (hour and minute) of the clock on  
Select this submenu to set the 12h/24h time dis-  
play mode.  
the meter by rotating the  
switch.  
To return to the top page of the setting mode, select  
[Back].  
Push the switch to set the values  
Instruments and controls 2-19  
Downloaded from manuals search engine  
3) Select [Confirm] to confirm the reset of the  
distance driven information to zero.  
[Stop/Start] (where fitted)  
[Maintenance]  
The CO2 savings and the engine stop time using  
the Stop/Start System are kept in a submenu.  
The maintenance intervals of the following remind-  
ers can be set or reset:  
For Diesel models jB :  
1) Select [Service].  
[Trip Saving]  
[Service] for engine oil change service reminder  
•
•
2) Press the  
switch for more than 2 sec-  
View the estimated CO2 exhaust emissions pre-  
vented since last reset.  
Select this submenu to view, or reset the dis-  
tance driven information or to set an interval  
(petrol models).  
onds, then release.  
3) Select [Reset].  
It is possible to reset using the [Reset CO2]  
submenu then push the  
switch to set to zero.  
–
View the distance driven information:  
Select [Service].  
4) Select [Confirm] to confirm the reset proce-  
dure.  
NOTE  
Alternatively while the oil service message is  
displayed (where fitted):  
–
Set procedure (petrol models only jA ):  
The [Trip Saving] value is the same informa-  
tion that is displayed when the engine is auto-  
matically stopped by the Stop/Start System.  
1) Select [Service].  
After changing the engine oil: Turn the igni-  
tion switch to ON and, while the oil service  
message is displayed within 3 seconds, push  
2) Select the distance driven/interval informa-  
tion.  
[Total Saving]  
View:  
•
both the  
and  
switches at the same  
3) Turn the  
switch and set the interval (mile-  
time for more than 5 seconds.  
age) accordingly. For interval (mileage) de-  
tails, see the separately provided Warranty  
Information and Maintenance booklet.  
–
The estimated CO2 exhaust emissions pre-  
vented.  
The display goes blank for 1 second; the de-  
fault interval is then displayed; and finally the  
display returns to normal.  
–
The time that the engine has been stopped  
by the Stop/Start System.  
4) Short press the  
interval (mileage).  
switch to confirm the set  
[Tyre]  
•
•
NOTE  
–
Reset procedure after changing engine oil.  
Select this submenu to set or reset the distance  
for replacing tyres.  
The [Total Saving] values cannot be reset  
and show accumulated Stop/Start System  
information since the vehicle was built.  
CAUTION  
[Other]  
Do not perform the reset operation unless  
the engine oil has been changed.  
For more information, see “Stop/Start System  
(where fitted)” in the “5. Starting and driving” sec-  
tion.  
Select this submenu and set or reset the dis-  
tance for replacing or checking other items.  
For Petrol models jA :  
To return to the previous page of the setting mode,  
select [Back].  
1) Select [Service].  
2) Select [Reset].  
2-20 Instruments and controls  
Downloaded from manuals search engine  

Related Topics

Popular Owner Manuals