Lever position j1 : Intermittent (
) or AUTO.
WINDSCREEN
Rain sensor (where fitted)
AUTO (where fitted) operates the rain-sensing auto
wiper system. (See “Rain sensor (where fitted)” later
in this section.).
The rain sensor is activated when the AUTO posi-
tion j1 of the wiper switch is selected.
The wiper will start to operate automatically at a suit-
able speed when rain is detected on the windscreen.
— The intermittent operation speed can be adjusted
by rotating the ring forward jA (slower) or back-
ward jB (faster).
The sensitivity of the rain sensing system can be
adjusted by rotating the ring of the wiper switch for-
ward jA – less sensitive, or backward jB – more
sensitive.
— The wiper operation speed will vary (where fit-
ted) in accordance with the vehicle speed. For ex-
ample, when the vehicle speed is high, the intermit-
tent operation speed will be faster.
NIC1471
NOTE
Intermittent (without rain sensor)
Lever position Low (
speed operation
) j2 – for continuous low
The rain sensor is only intended for use during
rain or precipitation. During other weather condi-
tions no harm will come to the rain sensor sys-
tem if left active (wiper switch set to AUTO), al-
though occasional unexpected activation of the
wipers may occur.
Lever position High (
speed operation
) j3 – for continuous high
Washer operation
Pull the lever toward you j5 to operate the washer.
For every fifth operation of the wiper and washer,
the headlight washing system (where fitted) will be
activated to clean the headlights. The headlight
washing system is only activated while the headlight
NIC1469
AUTO (with rain sensor)
switch is in the
position. See “Headlight
cleaner (where fitted)” later in this section.
The windscreen wiper and washer can be operated
when the ignition switch is in the ON position.
Wiper drip wipe system (where fitted):
The wiper will also operate once about 3 seconds
after the washer and wiper are operated. This op-
eration is to wipe washer fluid that has dripped on
the windscreen.
Wiper operation
Move the lever up or down to operate the wiper at
the following speeds:
Lever position Up j4 — for a single sweep opera-
tion of the wiper.
2-22 Instruments and controls
Downloaded from manuals search engine