2007-2012 Nissan X Trail SUV Instruments and controls User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and controls for Your Nissan X Trail SUV Second Generation (2007-2012)

(57,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2 Instruments and controls
Cockpit
....
....................................................................................................... 2-3
Left-Hand Drive (LHD) model
....
........................................................ 2-3
Right-Hand Drive (RHD) model
....
.................................................... 2-4
Instrument panel
....
...................................................................................... 2-5
Left-Hand Drive (LHD) model
....
........................................................ 2-5
Right-Hand Drive (RHD) model
....
.................................................... 2-6
Meters and gauges
....
................................................................................. 2-7
Speedometer and odometer
....
.......................................................... 2-7
Tachometer
....
......................................................................................... 2-8
Engine coolant temperature gauge
....
.............................................. 2-9
Fuel gauge
....
.......................................................................................... 2-9
Instrument brightness control
....
..................................................... 2-10
Continuously Variable Transmission (CVT) position
indicator (if equipped)
....
.................................................................. 2-10
Compass (if equipped)
....
....................................................................... 2-10
Zone variation change procedure
....
.............................................. 2-11
Warning/indicator lights and audible reminders
....
........................... 2-12
Checking bulbs
....
.............................................................................. 2-13
Warning lights
....
................................................................................. 2-13
Indicator lights
....
................................................................................ 2-17
Audible reminders
....
.......................................................................... 2-19
Vehicle information display
....
................................................................. 2-20
How to use the vehicle information display
....
............................ 2-20
Startup display
....
................................................................................ 2-21
Settings
....
............................................................................................ 2-21
Vehicle information display warnings and indicators
....
............ 2-28
Oil control system (for diesel engine model)
....
......................... 2-33
Trip computer
....
.................................................................................. 2-34
Clock and outside air temperature
....
............................................ 2-36
Driver Attention Alert (if equipped)
....
........................................... 2-36
Traffic Sign Recognition (if equipped)
....
..................................... 2-37
Headlight and turn signal switch
....
..................................................... 2-39
Headlight switch
....
.......................................................................... 2-39
Headlight aiming control
....
............................................................ 2-42
Battery saver system
....
.................................................................. 2-44
Headlight cleaner (if equipped)
....
............................................... 2-44
Turn signal switch
....
........................................................................ 2-44
Fog light switch
....
.................................................................................... 2-45
Front fog lights (if equipped)
....
................................................... 2-46
Rear fog light (if equipped)
....
...................................................... 2-46
Wiper and washer switch
....
.................................................................. 2-47
Windshield wiper and washer switch
....
.................................... 2-47
Rain-sensing auto wiper system (if equipped)
....
.................... 2-48
Rear window wiper and washer switch
....
................................. 2-49
Defogger switch
....
................................................................................... 2-49
Horn
....
........................................................................................................ 2-50
Windows
....
................................................................................................ 2-50
Power windows
....
............................................................................ 2-50
Sunroof (if equipped)
....
......................................................................... 2-52
Automatic sunroof and sunshade
....
............................................ 2-52
Power outlets
....
........................................................................................ 2-53
Ashtrays and cigarette lighter (if equipped)
....
................................. 2-54
Ashtray
....
............................................................................................ 2-54
Cigarette lighter
....
........................................................................... 2-54
Storages
....
................................................................................................. 2-54
Glove box
....
...................................................................................... 2-54
Console box
....
.................................................................................. 2-55
Sunglasses holder
....
....................................................................... 2-55
Cup holders
....
.................................................................................. 2-55
Soft bottle holders
....
...................................................................... 2-56
Card holder
....
................................................................................... 2-56
Luggage hooks
....
............................................................................ 2-57
Condition: 'Except for China'/
>
(58,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Luggage compartment
....
.................................................................. 2-57
Coat hook
....
........................................................................................ 2-59
Tonneau cover (if equipped)
....
....................................................... 2-60
Roof rail (if equipped)
....
......................................................................... 2-60
Sun visors
....
............................................................................................... 2-61
Type A
....
............................................................................................... 2-61
Type B
....
............................................................................................... 2-61
Interior lights
....
.......................................................................................... 2-62
Interior light switch
....
........................................................................ 2-62
Console light
....
................................................................................... 2-62
Map lights
....
........................................................................................ 2-62
Room light (if equipped)
....
............................................................ 2-62
Rear personal lights (if equipped)
....
.......................................... 2-63
Vanity mirror light
....
......................................................................... 2-63
Luggage room light
....
..................................................................... 2-63
Battery saver system
....
.................................................................. 2-63
HomeLink
®
Universal Transceiver (if equipped)
....
.......................... 2-63
Programming HomeLink
®
....
.......................................................... 2-64
Operating the HomeLink
®
Universal Transceiver
....
................ 2-64
Programming troubleshooting
....
.................................................. 2-64
Clearing the programmed information
....
................................... 2-65
Reprogramming a single HomeLink
®
button
....
........................ 2-65
If your vehicle is stolen
....
.............................................................. 2-65
Condition: 'Except for China'/
(59,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
GUID-2116CED6-7CE5-4CD6-B598-371FAD3F4428
LEFT-HAND DRIVE (LHD) MODEL
GUID-A2B83D89-E666-4851-84D1-A6A6FC2F451E
JVC0643X
1. Instrument brightness control
2. TRIP RESET switch
3. Headlight and turn signal switch/Fog light
switch*
4. Steering-wheel-mounted controls (left side)
— Audio control* or Navigation system **
— Vehicle information display control
— Bluetooth
®
Hands-Free Phone System (with-
out navigation)*
— Bluetooth
®
Hands-Free Phone System (with
navigation)*
5. Steering wheel
— Horn
6. Wiper and washer switch
7. Hazard indicator flasher switch
8. Steering-wheel-mounted controls (right side)
— Cruise control switches*
— Speed limiter switches*
— Bluetooth
®
Hands-Free Phone System (with-
out navigation)*
— Bluetooth
®
Hands-Free Phone System (with
navigation)*
— Voice recognition system switch*
9. Shift lever
— Continuously Variable Transmission (CVT)
— Manual Transmission (MT)
10. Vehicle Dynamic Control (VDC) OFF switch or
Electronic Stability Program (ESP) OFF switch
11. Headlight aiming control switch*
12. Parking brake (Pedal type)*
13. ECO switch*
14. Headlight cleaner switch*
15. Parking sensor (sonar) system OFF switch*
16. Power back door switch*
17. Stop/Start OFF switch*
18. Power back door main switch*
19. Push-button ignition switch (model with Intelli-
gent Key system)*
20. Ignition switch (model without Intelligent Key
system)*
21. Parking brake (Switch type)*
22. Hill descent control switch*
23. Four-Wheel Drive (4WD) mode switch*
*: if equipped
**: See the separate Navigation System Owner’s
Manual (if equipped).
Instruments and controls 2-3
COCKPIT
Condition: 'Except for China'/
(60,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-4 Instruments and controls
RIGHT-HAND DRIVE (RHD) MODEL
GUID-555A750C-36EE-4830-8EF4-2CFBC008F6BC
JVC0649X
1. Hill descent control switch*
2. Steering-wheel-mounted controls (left side)
— Audio control* or Navigation system **
— Vehicle information display control
— Bluetooth
®
Hands-Free Phone System (with-
out navigation)*
— Bluetooth
®
Hands-Free Phone System (with
navigation)*
3. Hazard indicator flasher switch
4. Headlight and turn signal switch/Fog light
switch* or Wiper and washer switch
5. Push-button ignition switch (model with Intelli-
gent Key system)*
6. Steering-wheel-mounted controls (right side)
— Cruise control switches*
— Speed limiter switches*
— Bluetooth
®
Hands-Free Phone System (with-
out navigation)*
— Bluetooth
®
Hands-Free Phone System (with
navigation)*
— Voice recognition system switch*
7. Wiper and washer switch or Headlight and turn
signal switch/Fog light switch*
8. Power back door main switch*
9. Power back door switch*
10. Instrument brightness control
11. TRIP RESET switch
12. Vehicle Dynamic Control (VDC) OFF switch or
Electronic Stability Program (ESP) OFF switch
13. Four-Wheel Drive (4WD) mode switch*
14. Shift lever
— Continuously Variable Transmission (CVT)
— Manual Transmission (MT)
15. Parking brake (Switch type)*
16. Steering wheel
— Horn
17. Parking brake (Pedal type)*
18. Ignition switch (model without Intelligent Key
system)*
19. Stop/Start or Idling Stop OFF switch*
20. Parking sensor (sonar) system OFF switch*
21. ECO switch*
22. Headlight aiming control switch*
*: if equipped
**: See the separate Navigation System Owner’s
Manual (if equipped).
Condition: 'Except for China'/
(61,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
T32A130827-641A2E23-D491-4DC1-B98C-8039059F207F
LEFT-HAND DRIVE (LHD) MODEL
T32A130827-B374733E-7D14-4DAD-BF23-B13B9E3FA835
JVC0663X
1. Side ventilator
2. Meters and gauges/Clock
3. Center ventilator
4. Audio system* or Navigation system**
— Rear view monitor*
— Around view monitor*
— Bluetooth
®
Hands-Free Phone System (with-
out navigation)*
— Bluetooth
®
Hands-Free Phone System (with
navigation)*
— Voice Recognition System*
5. Passenger’s front-impact air bag
6. Fuse box cover
7. Fuel filler lid release handle
8. Hood release handle
9. Steering wheel lock lever
10. Driver’s front-impact air bag/Horn
11. Heater/air conditioner control
12. Auxiliary input jack* and USB port*
13. Power outlet*/Cigarette lighter*
14. Defogger switch
15. Glove box
16. Fuse box cover*
*: if equipped
**: See the separate Navigation System Owner’s
Manual (if equipped).
Instruments and controls 2-5
INSTRUMENT PANEL
Condition: 'Except for China'/
(62,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-6 Instruments and controls
RIGHT-HAND DRIVE (RHD) MODEL
T32A130827-2AD0C521-01D1-4D5C-85C8-0A39747F24AF
JVC0662X
1. Side ventilator
2. Passenger’s front-impact air bag
3. Audio system* or Navigation system**
— Rear view monitor*
— Around view monitor*
— Bluetooth
®
Hands-Free Phone System (with-
out navigation)*
— Bluetooth
®
Hands-Free Phone System (with
navigation)*
— Voice Recognition System*
4. Center ventilator
5. Meters and gauges/Clock
6. Driver’s front-impact air bag/Horn
7. Glove box
— Fuse box
8. Heater/air conditioner control
9. Power outlet*/Cigarette lighter*
10. Auxiliary input jack* and USB port*
11. Defogger switch
12. Steering wheel lock lever
13. Hood release handle
14. Fuel filler lid release handle
15. Fuse box cover*
*: if equipped
**: See the separate Navigation System Owner’s
Manual (if equipped).
Condition: 'Except for China'/
(63,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
T32A130827-61161089-B3F4-48BD-8245-F2C7861CCBFC
JVC0581X
1. Tachometer
2. Warning/indicator lights
3. Vehicle information display
— Odometer/twin trip odometer
4. Speedometer
5. Engine coolant temperature gauge
6. Fuel gauge
SPEEDOMETER AND ODOMETER
GUID-8A0FCB7F-6CD7-4D03-AA2B-5C417FBD053B
Speedometer
T32A130827-F92754DF-EC37-413C-8470-52EDADC5C86E
JVI1006X
The speedometer indicates the vehicle speed (km/h or
MPH).
Odometer (except for Europe, Australia, New
Zealand and South Africa)
GUID-E08B65C1-462B-46EE-A6C3-E65B9702325C
JVI0771X
Instruments and controls 2-7
METERS AND GAUGES
Condition: 'Except for China'/
(64,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-8 Instruments and controls
Odometer/Twin trip odometer:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The odometer/twin trip odometer is displayed in the
vehicle information display when the ignition switch is
in the “ON” position.
The odometer
*
1
displays the total distance the
vehicle has been driven.
The twin trip odometer
*
2
displays the distance of
individual trips.
Changing twin trip odometer display:
Push the TRIP RESET switch
*
3
(located on the
instrument panel) to change the display as follows:
TRIP A ? TRIP B ? TRIP A
Resetting twin trip odometer:
Push the TRIP RESET switch
*
3
for more than 1
second to reset the trip odometer to zero.
Distance to empty (dte — km or mile)/
Odometer (for Europe, Australia, New Zeal-
and and South Africa)
T32A130827-32319E21-FB3A-4C15-B48A-C9438D837662
JVI0771X
Distance to empty (dte — km or mile):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The distance to empty (dte)
*
1
provides you with an
estimation of the distance that can be driven before
refueling. The dte is constantly being calculated, based
on the amount of fuel in the fuel tank and the actual fuel
consumption.
The display is updated every 30 seconds.
The dte mode includes a low range warning feature. If
the fuel level is low, the warning is displayed on the
screen.
When the fuel level drops even lower, the dte display
will change to “———”.
. If the amount of fuel added is small, the display
just before the ignition switch is placed in the
“OFF” position may continue to be displayed.
. When driving uphill or rounding curves, the fuel in
the tank shifts, which may momentarily change the
display.
Odometer/Twin trip odometer:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Odometer/Twin trip odometer:
The odometer/twin trip odometer is displayed in the
vehicle information display when the ignition switch is
in the “ON” position.
The odometer
*
2
displays the total distance the
vehicle has been driven.
The twin trip odometer
*
2
displays the distance of
individual trips.
Changing twin trip odometer display:
Push the TRIP RESET switch
*
3
(located on the
instrument panel) to change the display as follows:
ODO ? TRIP A ? TRIP B ? ODO
Resetting twin trip odometer:
Push the TRIP RESET switch
*
3
for more than 1
second to reset the trip odometer to zero.
TACHOMETER
T32A130827-C6C26C2A-AEB1-498A-A73D-8CE55B813269
JVI0951X
The tachometer indicates the engine speed in revolu-
tions per minute (rpm). Do not rev the engine into
the red zone
*
1
.
The red zone varies with models.
Condition: 'Except for China'/
(65,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
ENGINE COOLANT TEMPERATURE
GAUGE
GUID-05FC41A9-E697-4E4F-A8C0-B79DA1F7C125
JVI0999X
Type A
JVI0820X
Type B
JVI0796X
Type C
The engine coolant temperature gauge indicates the
engine coolant temperature.
The engine coolant temperature is normal when the
gauge needle points within the zone
*
1
shown in the
illustration.
The engine coolant temperature will vary with the
outside air temperature and driving conditions.
CAUTION:
. If the gauge indicates the engine coolant
temperature is near the hot (H) end of the
normal range, reduce vehicle speed to
decrease the temperature.
. If the gauge is over the normal range, stop
the vehicle as soon as safely possible and
let the engine idle.
. If the engine is overheated, continued op-
eration of the vehicle may seriously damage
the engine. (See “If your vehicle overheats”
(P.6-10) for immediate action required.)
FUEL GAUGE
T32A130827-709BDE93-1E77-47B8-94F0-E6E127F56E7C
JVI0640X
The fuel gauge indicates the approximate fuel level in
the tank when the ignition switch is in the “ON”
position.
The gauge may move slightly during braking, turning,
accelerating, or going up and down hills due to
movement of fuel in the tank.
The low fuel warning
appears on the vehicle
information display when the fuel level in the tank is
getting low. Refu el as soon as it is convenient,
preferably before the gauge reads 0 (empty).
The arrow,
, indicates the fuel filler lid is located on
the right side of the vehicle.
CAUTION:
Refuel before the gauge reads the empty (0)
position.
There is a small reserve of fuel in the tank when the fuel
gauge reads the empty (0) position.
Instruments and controls 2-9
Condition: 'Except for China'/
(66,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-10 Instruments and controls
INSTRUMENT BRIGHTNESS CONTROL
T32A130827-4B4E1BB1-064B-41FF-BF73-F1A599D4FFD2
JVI0644X
JVI0661M
The ins trume nt brightness control switch can be
operated when the ignition switch is in the “ON”
position. When the switch is operated, the vehicle
information display switches to the brightness adjust-
ment mode.
Push the + side of the switch
*
A
to brighten the
meter panel lights and i n strument panel light s (if
equipped). The bar
*
1
moves to the + side.
Push the - side of the switch
*
B
to dim the lights. The
bar
*
1
moves to the − side.
The vehicle information display returns to the normal
display when the instrument brightness control switch
is not operated for more than 5 seconds.
CONTINUOUSLY VARIABLE TRANSMIS-
SION (CVT) POSITION INDICATOR (if
equipped)
T32A130827-70DD4510-E19D-4AF8-8367-56D79B1EA242
The Continuously Variable Transmission (CVT) position
indicator indicates the shift lever position when the
ignition switch is in the “ON” position.
GUID-9D19DCDD-D820-4733-B7B5-DF99D34E8259
SIC3181
When the ignition switch is placed in the “ON”
position, the compass display
*
B
will indicate the
direction the vehicle is heading.
NOS1741
If the display reads “C”, calibrate the compass by
driving the vehicle in 3 complete circles at less than 8
km/h (5 MPH). You can also calibrate the compass by
driving your vehicle on your everyday route. The
compass will be calibrated once it has tracked 3
complete circles.
To turn on and off the compass manually, push the
switch
*
A
while the ignition switch is in the “ON”
position.
COMPASS (if equipped)
Condition: 'Except for China'/
(67,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
ZONE VARIATION CHANGE PROCEDURE
GUID-30DDF5A7-BDA3-4F35-A83F-CA7319278C24
SIC2934
Zone map
The difference between magnetic north and geogra-
phical north is known as variance. In some areas, this
difference can sometimes be great enough to cause
false compass readings. Follow these instructions to
set the variance for your particular location if this
happens:
1. Push the
switch for more than 3 seconds.
The current zone number will appear in the display.
2. Find your current location and varian ce one
number on the zone map.
3. Push the
switch repeatedly until the new
zone number appears in the display. After you stop
pushing the switch in, the display will show a
compass direction within a few seconds.
. If the compass deviates from the correct indication
soon after repeated adjustment, have the com-
pass checked at a NISSAN dealer.
. The compas s may not indicate the correct
compass point in tunnels or while driving up or
down a steep hill. (The compass returns to the
correct compass point when the vehicle moves to
an area where the geomagnetism is stabilized.)
CAUTION:
. Do not install a ski rack, antenna, etc. which
are attached to the vehicle by means of a
magnet. They affect the operation of the
compass.
. When cleaning the mirror, use a paper towel
or similar materia l dampened with glass
cleaner. Do not spray glass cleaner directly
on the mirror as it may cause the liquid
cleaner to enter the mirror housing.
Instruments and controls 2-11
Condition: 'Except for China'/
(68,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-12 Instruments and controls
T32A130827-537914DC-5D30-44AA-8E50-9E9C0943566D
Anti-lock Braking System (ABS) warning
light
Supplemental Restraint System (SRS) air
bag warning light
High beam indicator light
Brake warning light (red)
Vehicle Dynamic Control (VDC) warning
light (except for Europe)/Electronic Stability
Program (ESP) warning light (for Europe)
Hill descent control system on indicator light
(if equipped)
Charge warning light
Water-in-fuel-filter warning light (diesel en-
gine model)
Hill Start Assist system on indicator light (if
equipped)
Electric power steering warning light Dipped beam indicator light (if equipped)
Malfunction Indicator Light (MIL)
Electronic parking brake system warning
light (yellow) (if equipped)
Door lock indicator light (if equipped)
Rear fog light indicator light (if equipped)
Electronic parking brake warning light (if
equipped)
ECO mode system indicator light (if
equipped)
Security indicator light
Forward emergency braking system warning
light (if equipped)
Four-Wheel Drive (4WD) AUTO indicator
light (4WD model)
Small light indicator light
Low tire pressure warning light (if equipped)
Four-Wheel Drive (4WD) LOCK indicator
light (4WD model)
SPORT mode indicator light (if equipped)
Malfunction warning light (red) (diesel en-
gine model)
Front fog lights indicator light (if equipped)
Trailer direction indicator light (if equipped)
Master warning light
Front passenger air bag status light (if
equipped)
Turn signals/hazard indicator lights
Seat belt warning light
Glow plug indicator light (diesel engine
model)
Vehicle Dynamic Control (VDC) off indicator
light (except for Europe)/Electronic Stability
Program (ESP) off indicator light (for Eur-
ope)
Speed [120 km/h (75 MPH)] warning light
(if equipped)
High beam assist indicator light (if
equipped)
WARNING/INDICATOR LIGHTS AND
AUDIBLE REMINDERS
Condition: 'Except for China'/
(69,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
CHECKING BULBS
T32A130827-EBA59803-7D2B-4C04-B703-63489997C4CF
With all doors closed, apply the parking brake, fasten
the seat belts and place the ignition switch in the “ON”
position without starting the engine. If equipped, the
following lights will illuminate:
, , .
If equipped, the following lights will illuminate briefly
and then turn off:
, , , , , ,
, , , .
If any lights fail to illuminate, it may indicate a burned-
out bulb or an open circuit in the electrical system.
Have the system checked, and if necessary repaired,
by a NISSAN dealer promptly.
Some indicators and warnings are also displayed on
the vehicle information display between the speed-
ometer and tachometer. (See “Vehicle info rmation
display” (P.2-20).)
WARNING LIGHTS
T32A130827-46296CF3-37C5-4346-A68C-59CEFA75C8A1
Anti-lock Braking System (ABS)
warning light
T32A130827-7EAF4149-1838-4DB1-ABC6-DF9D1301CA4F
When the ignition switch is in the “ON” position, the
Anti-lock Braking System (ABS) warning light illumi-
nates and then turns off. This indicates the ABS is
operational.
If the ABS warning light illuminates while the engine is
running, or while driving, it may indicate the ABS is not
functioning properly. Have the system checked by a
NISSAN dealer promptly.
If an ABS malfunction occurs, the anti-lock function is
turned off. The brake system then operates normally,
but without anti-lock assistance. (See “Brake system”
(P.5-57).)
Brake warning light (red)
T32A130827-2CAA8163-1B97-433F-9851-7D289C0747A6
WARNING:
. If the brake fluid level is below the minimum
mark on the brake fluid reservoir, do not
drive the vehicle until the brake system has
been checked by a NISSAN dealer.
. Even if you judge it to be safe, have your
vehicle towed because driving it could be
dangerous.
. Depressing the bra ke ped al wit hout the
engine running and/or with a low brake
fluid level could increase the stopping dis-
tance and require greater pedal travel dis-
tance and effort.
The brake warning light indicates the parking brake
system operation (models not equipped with electronic
parking brake system), a low brake fluid level of the
brake system and an Anti-lock Braking System (ABS)
malfunction.
Parking brake warning indicator (models not
equipped with electronic parking brake system):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
When the ignition switch is placed in the “ON”
position, the brake warning light illuminates. When
the engine is started and the parking brake is released,
the brake warning light turns off.
If the parking brake is not fully released, the brake
warning light remains on. Be sure that the brake
warning light has turned off before driving. (See
“Parking brake” (P.3-30).)
Low brake fluid warning indicator:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
If the brake warning light illuminates while the engine is
running, or while driving, and the parking brake is
released, it may indicate the brake fluid level is low.
When the brake warning light illuminates while driving,
stop the vehicle safely as soon as possible. Stop the
engine and check the brake fluid level. If the brake fluid
level is at the minimum mark, add brake fluid as
necessary. (See “Brake fluid” (P.8-16).)
If the brake fluid level is sufficient, have the brake
system checked by a NISSAN dealer promptly.
Anti-lock Braking System (ABS) warning indi-
cator:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
When the parking brake is released and the brake fluid
level is sufficient, if both the brake warning light and the
Anti-lock Braking System (ABS) warning light illumi-
nate, it may indicate the ABS is not fu nctioning
properly. Have the brake system checked, and if
necessary repaired, by a NISSAN dealer promptly.
(See “Anti-lock Braking System (ABS) warning light”
(P.2-13).)
Charge warning light
T32A130827-8D7D75AC-501C-4035-BE1B-4691794A60C5
When the ignition switch is in the “ON” position, the
charge warning light illuminates, and then turns off.
This indicates the charging system is operational.
If the charge warning light illuminates while the engine
is running, or while driving, it may indicate the charging
system is not functioning properly and may need
servicing.
When the charge warning light illumina tes while
driving, stop the vehicle safely as soon as possible.
Stop the engine and check the alternator belt. If the
alternator belt is loose, broken or missing, the charging
system needs repair. (See “Drive belt” (P.8-14).)
Instruments and controls 2-13
Condition: 'Except for China'/
(70,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-14 Instruments and controls
If the alternator belt appears to be functioning correctly
but the charge warning light remains illuminated, have
the charging system checked by a NISSAN dealer
promptly.
CAUTION:
Do not continue driving if the alternator belt is
loose, broken or missing.
Electric power steering warning light
T32A130827-6FCBDA0B-9C53-4216-8E76-3B48245AA864
When the ignition switch is in the “ON” position, the
electric power steering warning light illuminates. After
starting the engine, the electric power steering warning
light turns off. This indicates the electric power
steering system is operational.
If the electric power steering warning light illuminates
while the engine is running, it may indicate the electric
power steering system is not functioning properly and
may need servicing. Have the electric power steering
system checked by a NISSAN dealer.
When the electric power steering warni ng light
illuminates with the engine running, the power assist
to the steering will cease operation but you will still
have co ntrol of the vehicle. At this time, greater
steering efforts are required to operate the steering
wheel, especially in sharp turns and at low speeds.
(See “Electric power steering system” (P.5-56).)
Electronic parking brake system warn-
ing light (yellow) (if equipped)
GUID-D3782E32-8974-4FEC-A10B-C58225CBD476
The electronic parking brake system warning light
functions for the electronic parking brake system.
When the ignition switch is placed in the “ON”
position, the light illuminates for a few seconds. If the
warning light illuminates at any other time, it may
indicate that the electronic parking brake system is not
functioning properly. Have the brake system checked,
and if necessary repaired, b y a NI SSAN dealer
promptly.
Electronic parking brake warning light
(if equipped)
GUID-DCFF7323-698B-48F3-9988-92076E0469F2
The electronic parking brake warning light indicates
that the electronic parking brake system is operating.
When the ignition switch is placed in the “ON”
position, the electronic parking brake warning light
illuminates. When the engine is started and the parking
brake is released, the warning light turns off.
If the parking brake is not fully released, the electronic
parking brake warning light remains on. Be sure that
the electronic parking brake warning light has turned
off before driving. (See “Parking brake” (P.3-30).)
If the electronic parking brake warning light illuminates
or flashes while the electronic parking brake system
warning light
(yellow) illuminates, it may indicate
that the e lectronic parking brake system is not
functioning properly. Have the brake system checked,
and if necessary repaired, b y a NI SSAN dealer
promptly.
Forward emergency braking system
warning light (if equipped)
GUID-041E8DC6-F95E-4205-9E28-3C1BAB9939A0
When the ignition switch is in the “ON” position, the
forwa rd emergency braking system warning light
illuminates and then turns off.
This light illuminates when the forward emergency
braking system is set to OFF on the vehicle information
display.
If the light illuminates when the forward emergency
braking system is ON, it may indicate that the system is
unavailable. See “Forward emergency braking system”
(P.5-45) for more details.
Low tire pressure warning light (if
equipped)
GUID-A2AD7EC7-3E1A-4BEC-9517-43A33270B41E
When the ignition switch is in the “ON” position, the
low tire pressure warning light illuminates and then
turns off. This indicates that the low tire pressure
warning system is operational.
This light illuminates if there is low tire pressure or a tire
pressure warning system malfunction.
The Tire Pressure Monitoring System (TPMS) monitors
the tire pressure of all tires except the spare.
Low tire pressure warning:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
If the vehicle is being driven with low tire pressure, the
low tire pressure warning light will illuminate.
When the low tire pressure warning light illuminates,
you should stop and adjust the tire pressure to the
recommended COLD tire pressure shown on the tire
placard. Use a tire pressure gauge to check the tire
pressure. The low tire pressure warning light may not
automatically turn off when the tire pressure is
adjusted. After the tire is inflated to the recommended
Condition: 'Except for China'/
(71,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
pressure, reset the tire pressures registered in your
vehicle and then drive the vehicle at speeds above 25
km/h (16 MPH). These operations are required to
activate the TPMS and turn off the low tire pressure
warning light.
Depending on a change in the outside temperature,
the low tire pressure warning light may illuminate even
if the tire pressure has been adjusted properly. Adjust
the tire pressure to the recommended COLD tire
pressure again when the tires are cold, and reset the
TPMS.
If the low tire pressure warning light still continues to
illuminate after the resetting operation, it may indicate
that the TPMS is not functioning properly. Have the
system checked by a NISSAN dealer.
For additional information, see “Tire Pressure Monitor-
ing System (TPMS)” (P.5-4).
TPMS malfunction:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
If the TPMS is not functioning properly, the low tire
pressure warning light will flash for approximately 1
minute when the ignition switch is placed in the “ON”
position. The light will remain on after the 1 minute.
Have the system checked by a NISSAN dealer.
For additional information, see “Tire Pressure Monitor-
ing System (TPMS)” (P.5-4).
WARNING:
. If the light does not illuminate with the
ignition switch placed in the “ON” position,
have the vehic le checked by a NISSAN
dealer as soon as possible.
. If the light illuminates while driving, avoid
sudden steering maneuvers or abrupt brak-
ing, reduce vehicle speed, pull off the road to
a safe location and stop the vehicle as soon
as possible. Driving with under-inflated tires
may permanently damage th e tires and
increase the likelihood of tire failure. Ser-
ious vehicle damage could occur and may
lead to an accident and could result in
serious personal injury. Check the tire pres-
sure for all four tires. Adjust the tire pressure
to the recommended COLD tire pressure
shown on the tire placard to turn the low tire
pressure warning light off. If you have a flat
tire, replace it with a spare tire as soon as
possible.
. After adjusting the tire pressure, be sure to
reset the TPMS. Otherwise, the TPMS will
not warn of low tire pressure.
. When a spare tire is mounted or a wheel is
replaced, the TPMS will not function and the
low tire pressure warning light will flash for
approximately 1 minute. The light will re-
main on after the 1 minute. Contact your
NISSAN dealer as soon as possible for tire
replacement and/or system resetting.
. Replac ing tires with those not originally
specified by NISSAN could affect the proper
operation of the TPMS.
CAUTION:
. The TPMS is not a substitute for the regular
tire pressure check. Be sure to check the tire
pressure regularly.
. If the vehicle is being driven at speeds of
less than 25 km/h (16 MPH), the TPMS may
not operate correctly.
. Be sure to install the specified size of tires
to all four wheels correctly.
Malfunction warning light (red) (diesel
engine model)
GUID-2C65FC1D-B231-4910-A149-20A5D287D345
When the ignition switch is placed in the “ON”
position, the malfunction warning light illuminates in
red. This means that the system is operational. After
starting the engine, the warning light turns off.
For the orange Malfunction Indicator Light (MIL), see
“Malfunction Indicator Light (MIL)” (P.2-18) for details.
If the malfunction warning light (red) illumin ates
continuously while the engine is running, it may
indicate an engine control system malfunction. Have
your vehicle inspected by a NISSAN dealer. You do not
need to have your vehicle towed to the dealer.
CAUTION:
Continuing vehicle operati on without proper
servicing of the engine control system could
lead to poor driveability, reduced fuel economy,
and damage to the engine control system, which
may affect the vehicle’s warranty coverage.
Master warning light
T32A130827-0F95D9CF-20B0-4CC3-943D-8E2ABAFB3D9D
When the ignition switch is in the “ON” position, the
master warning light illuminates if any of the following
are displayed on the vehicle information display.
. Steering lock relea se malfunction indi cator (if
equipped)
. No Key detected warning (if equipped)
. Key ID incorrect warning (if equipped)
. Shift to Park warning ( Continuously Variable
Transmission (CVT) models)
Instruments and controls 2-15
Condition: 'Except for China'/
(72,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-16 Instruments and controls
. Door/back door open warning
. Low fuel warning
. Release parking brake warning
. Engine start operation indicator (for Continuously
Variable Transmission (CVT) models)
. Key System Fault warning (if equipped)
. Low Tyre Pressure warning (if equipped)
. Tyre pressure system fault (if equipped)
. CVT System Fault warni ng (for Continuously
Variable Transmission (CVT) models)
. Low oil pressure Stop vehicle warning (if
equipped)
. 4WD system fault warning (if equipped)
. 4WD High Temp. Stop vehicle warning (if
equipped)
. Tyre size incorrect warning (if equipped)
. Key battery low warning (if equipped)
. Battery Voltage Low Charge Battery warning
. Headlight system fault warning (if equipped)
. Chassis control system fault warning (if equipped)
. Second row seat belt warning (if equipped)
. Other warning
See “Vehicle information display” (P.2-20).
Seat belt warning light
T32A130827-9DAB3AE1-1B41-4E43-80F5-F5EC8E7B1548
Type A:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The light illuminates whenever the ignition switch is
placed in the “ON” or “START” position, and will
remain illuminated until the driver’s seat belt is
fastened. At the same time, the chime will sound for
about 6 seconds unless the driver’s seat belt is
securely fastened.
Type B:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
When the ignition switch is in the “ON” position, the
front seat belt warning light on the meter illuminates.
The light will continue to illuminate until the driver’s
and/or passenger’s seat belt are fastened. (See “Seat
belts” (P.1-9).)
When the vehicle speed exceeds 15 km/h (10 MPH),
the light will blink and the chime will sound unless the
front seat belt is securely fastened. The chime will
continue to sound for about 95 seconds until the seat
belt is fastened. (See “Seat belts” (P.1-9).)
For second row seats, see “Vehicle information display
warnings and indicators” (P.2-28).
Speed [120 km/h (75 MPH)] warning
light (if equipped)
GUID-9C822C2A-6FEF-4D2E-B89C-C3611A9D7E23
This light blinks when the vehicle speed goes over
approximately 120 km/h (75 MPH). Be sure to observe
the speed limit in the area where you are driving.
Supplemental Restraint System (SRS)
air bag warning light
T32A130827-06E12469-6BF1-45B8-83C8-E56E6F3BDF46
When the ignition switch is in the “ON” position, the
Supplemental Restraint System (SRS) air bag warning
light illuminates for about 7 seconds and then turns off.
This indicates the SRS air bag system is operational.
If any of the following conditions occur, the SRS air
bag system and/or pre-tensioner seat belt need
servicing. Have the system checked, and if necessary
repaired, by a NISSAN dealer promptly.
. The SRS air bag warning light remains illuminated
after about 7 seconds.
. The SRS air bag warning light flashes intermit-
tently.
. The SRS air bag warning light does not come on
at all.
Unless checked and repaired, the SRS air bag system
and/or pre-tensioner seat belt may not function
properly. (See “Supplemental Restraint System
(SRS)” (P.1-27).)
Vehicle Dynamic Control (VDC) warn-
ing light (except for Europe)/Electronic Sta-
bility Program (ESP) warning light (for
Europe)
GUID-A6886B4F-197A-4B65-9BBF-B46494A1002C
When the ignition switch is in the “ON” position, the
Vehicle Dynamic Control (VDC)/Electronic Stability
Program (ESP) warning light illuminates and then turns
off.
The warning light blinks when the VDC/ESP system is
operating.
When the warning light blinks while driving, the driving
condition is slippery and the vehicle’s traction limit is
about to be exceeded.
If the VDC/ESP warning light illuminates while the
engine is running or while driving, it may indicate that
the VDC/ESP system is not functioning properly and
may need servicing. Have the system checked, and if
necessary repaired, by a NISSAN dealer promptly. If a
malfunction occurs, the VDC/ESP function is turned
off, but the vehicle is still drivable. (See “Vehicle
Dynamic Control (VDC)/Electronic Stability Program
(ESP) system” (P.5-26).)
Condition: 'Except for China'/
(73,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Water-in-fuel-filter warning light (diesel
engine model)
T32A130827-8784F723-B4A8-44BC-8916-AD5C9D6C8DAA
If the water-in-fuel-filter warning light illuminates while
the engine is running, contact a NISSAN dealer as
soon as possible.
CAUTION:
Continuing vehicle operation without properly
draining could cause serious damage to the
engine.
INDICATOR LIGHTS
T32A130827-40790345-29A6-4471-B7F0-97F981B3FB66
Dipped beam indicator light (if
equipped)
T32A130827-EE027B81-0279-4324-A0E9-0150C2576917
The dipped beam indicator light illuminates when the
headlight low beam is on. (See “Headlight and turn
signal switch” (P.2-39).)
Door lock indicator light (if equipped)
GUID-36B1727D-9484-4156-A6C8-7B1BFAD5C373
The door lock indicator light, located on the instrument
panel, illuminates when all the doors are locked.
. With the ignition switch in the “ON” position, the
door lock indicator light will illuminate and stay on
when the doors are locked using the power door
lock switch.
. With the ignition switch in the “OFF” or “LOCK”
position, the door lock indicator light will operate
as follows:
— When the doors are locked with the power
door lock switch, the door lock indicator light
will illuminate for 30 minutes.
— When the doors are locked by pushing the
“LOCK” button (on the remote controller or
Intelligent Key) or the request switch (Intelli-
gent Key system equipped models), the door
lock indicator light will illuminate for 1 minute.
The door lock indicator light turns off when any door is
unlocked.
For locking or unlocking doors, see “Door locks” (P.3-
4).
ECO mode system indicator light (if
equipped)
GUID-4249E8B4-0039-4825-A929-886FADA4F09C
The ECO mode indicator light illuminates when the
ECO mode system is turned on.
(See “ECO mode system” (P.5-47).
Four-Wheel Drive (4WD) AUTO in-
dicator light (4WD model)
T32A130827-6E75C324-BD83-49D6-B3ED-A01014603822
When the ignition switch is in the “ON” position, the
Four-Wheel Drive (4WD) AUTO indicator light illumi-
nates and then turns off.
When selecting 4WD AUTO mode while the engine is
running, the 4WD AUTO indicator light illuminates.
(See “Four-Wheel Drive (4WD)” (P.5-22).)
Four-Wheel Drive (4WD) LOCK in-
dicator light (4WD model)
T32A130827-18CDADBD-C5EC-4B57-91E9-14F0CD3B4D0B
When the ignition switch is in the “ON” position, the
Four-Wheel Drive (4WD) LOCK indicator light illumi-
nates and then turns off.
When selecting 4WD LOCK mode while the engine is
running, the 4WD LOCK indicator light illuminates
simultaneously with the 4WD AUTO indicator light
illuminating. (See “Four-Wheel Drive (4WD)” (P.5-
22).)
CAUTION:
Do not drive on dry hard surface roads in the
LOCK mode.
Front fog lights indicator light (if
equipped)
T32A130827-EED0E205-54BF-444D-8D2E-20A50BFF6469
The front fog lights indicator light illuminates when the
front fog lights are on. (See “Fog light switch” (P.2-
45).)
/ Front passenger air bag status
light (if equipped)
GUID-7666AF54-61E5-4228-BA66-70889C5030F5
The front passenger air bag status light ( )
located on the instrument panel will illuminate when the
front passenger air bag is turned off with the front
passenger air bag switch. When the front passenger
air bag is turned on, the front passenger air bag status
light (
) will illuminate.
For more details, see “Supplemental front-impact air
bag system” (P.1-33).
Glow plug indicator light (diesel engine
model)
T32A130827-81D0A3A0-40C5-4FDF-BED2-8034FF5174D4
When the ignition switch is in the “ON” position, the
glow plug indicator light illuminates and turns off after
the glow plugs have warmed up.
If the glow plugs have already warmed up, the glow
plug indicator flashes briefly and then turns off.
Instruments and controls 2-17
Condition: 'Except for China'/
(74,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-18 Instruments and controls
High beam assist indicator light (if
equipped)
GUID-50DB9FD6-A5BA-4734-B48F-5B6262B538DF
The indicator light illuminates when the headlights
come on while the headlight switch is in the “AUTO”
position with the high beam selected. This indicates
that the high beam assist system is operational. (See
“Headlight and turn signal switch” (P.2-39).)
High beam indicator light
T32A130827-4091099F-CB07-4276-B667-3BD074F2E546
The high beam indicator light illuminates when the
headlight high beam is on. The indicator turns off when
the low beam is selected. (See “Headlight and turn
signal switch” (P.2-39).)
Hill descent control system on indicator
light (if equipped)
T32A130827-28B7FC03-C4D5-4C6C-8BFA-9E7561E98498
When the ignition switch is placed in the “ON” position
the h ill descent control system on indicator light
illuminates briefly and then turns off. This indicates
that the hill descent control system is operational.
The light illuminates when the hill descent control
system is activated.
If the hill descent control switch is on and the indicator
light blinks, the system is not engaged.
If the indicator light does not illuminate or blink when
the hill descent control switch is on, the system may
not be functioning properly. Have the system checked
by a NISSAN dealer.
For additional information, see “Hill descent control
system” (P.5-30).
Hill Start Assist system on indicator
light (if equipped)
GUID-5D3BB4C2-B651-4D95-98B6-BBF04E3208E8
The light illuminates when the conditions of the hill start
assist system are satisfied when the vehicle is stopped
on a hill.
Then, the light blinks when the brake pedal is released,
which indicates that the hill start assist system is
activated.
For additional information, see “Hill Start Assist
system” (P.5-30).
Malfunction Indicator Light (MIL)
T32A130827-5D3C4685-4828-404C-A15D-A0C96B37A7ED
CAUTION:
. Continuing vehicle operation without proper
servicing of the engine control system and/
or Continuously Variable Transmission (CVT)
could lead to poor driveability, reduced fuel
economy, and damage to the engine control
system and/or CVT system, which may affect
the vehicle’s warranty coverage.
. Incorrect setting of the engine control sys-
tem may lead to non-compliance of local
and national emission laws and regulations.
When the ignition switch is in the “ON” position, the
Malfunctio n Indicator Light (MIL) illuminates. After
starting the engine, the MIL turns off. This indicates
that the engine control system and/or CVT system is
operational.
If the MIL illuminates while the engine is running, it may
indicate that the engine control system is not
functioning properly and may need servicing. Have
the vehicle checked, and if necessary repaired, by a
NISSAN dealer promptly.
If the MIL blinks (if equipped) while the engine is
running, it may indicate a potential malfunction in the
emission control system. In this case, the emission
control system may not function properly and may need
servicing. Have the system checked, and if necessary
repaired, by a NISSAN dealer promptly.
Precautions:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
To reduce or avoid possible damage to the engine
control system when the MIL blinks:
. Avoid driving at speeds above 70 km/h (43 MPH).
. Avoid sudden acceleration or deceleration.
. Avoid going up steep uphill grades.
. Avoid carrying or towing unnecessary loads.
Rear fog light indicator light (if
equipped)
GUID-3BE98C0D-E553-453A-8DD7-D10AB9D1576E
The rear fog light indicator light illuminates when the
rear fog light is on. (See “Fog light switch” (P.2-45).)
Security indicator light
T32A130827-CAB130D8-5BB2-4700-9816-9655A9AA77D6
The security indicator light blinks when the ignition
switch is in the “LOCK”, “OFF” position. This function
indicates the security system* equipped on the vehicle
is operational. (* immobilizer)
If security system is malfunctioning, this light will
remain on while the ignition switch is in the “ON”
position. (See “Security system” (P.3-20) for additional
information.)
Condition: 'Except for China'/
(75,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Small light indicator light
T32A130827-952927B8-E86D-40A0-ADA2-5ED657B0A0DE
The light illuminates when the headlight switch is
turned to the
position.
SPORT mode indicator light (if
equipped)
GUID-49D371AC-8067-4316-8ABD-88BA45B995CE
The SPORT mode indicator light illuminates when the
SPORT mode is turned “ON”. (See “Driving with
Continuously Variable Transmission (CVT)” (P.5-13)
for the use of the SPORT mode switch.)
Trailer direction indicator light (if
equipped)
GUID-58827E84-89C9-468A-8CE3-E00B74876BDA
The light will illuminate wheneve r an additional
electrical load is detected by the direction indicator
system.
For additional information, see “Trailer towing (for
Australia, New Zealand, South Africa and Europe)”
(P.5-52).
Turn signals/hazard indicator lights
T32A130827-AEE83761-686F-466B-B3B8-EDF8D7DC0C36
The turn signals/hazard indicator lights blink when the
turn signal switch or hazard indicator flasher switch is
turned on. (See “Headlight and turn signal switch”
(P.2-39) or “Hazard indicator flasher switch” (P.6-2).)
Vehicle Dynamic Control (VDC) off
indicator light (except for Europe)/Electronic
Stability Program (ESP) off indicator light (for
Europe)
GUID-10C0347A-5993-4CEC-84D6-C6D36D4E64D2
When the ignition switch is in the “ON” position, the
Vehicle Dynamic Control (VDC)/Electronic Stability
Program (ESP) off indicator light illuminates and then
turns off.
The VDC/ESP off indicator light illuminates when the
VDC/ESP off switch is pushed to the “OFF” position.
When the VDC/ESP off switch is pushed to the “OFF”
position, the VDC/ESP system is turned off.
For details, see “Vehicle Dynamic Control (VDC)/
Electronic Stability Program (ESP) system” (P.5-26).
AUDIBLE REMINDERS
T32A130827-39FBB3CF-11CD-4DA8-9DB3-FBAF4F2E2596
Brake pad wear warning
T32A130827-2C378ED7-F157-4822-BCF0-6E95CAA4B880
The disc brake pads have audible wear warnings.
When a brake pad requires replacement, it will make a
high pitched scraping sound when the vehicle is in
motion. This scraping sound will first occur only when
the brake pedal is depressed. After more wear of the
brake pad, the sound will always be heard even if the
brake pedal is not depressed. Have the brakes
checked as soon as possible if the wear warning
sound is heard.
Have the system checked, and if necessary repaired,
by a NISSAN dealer promptly. (See “Brakes” (P.8-
15).)
Intelligent Key buzzer (if equipped)
T32A130827-4A0804B9-235D-48CF-8FEE-24C2BB97CE26
The Intelligent Key buzzer sounds if any one of the
following improper operations is found.
. The ignition switch is not returned to the “LOCK”
position when locking the doors.
. The Intelligent Key is left inside the vehicle when
locking the doors.
. Any doors are not closed securely when locking
the doors.
When the buzzer sounds, be sure to check both the
vehicle and the Intelligent Key. (See “Intelligent Key
system” (P.3-10).)
Light reminder chime
T32A130827-6F4DC6D7-A8DC-46E9-8460-55E269AD82EA
The chime will sound if the driver’s side door is opened
while the headlight switch is in either the
or
position and the ignition switch is in the “OFF” or
“LOCK” position.
Be sure to turn the light switch to the “OFF” or “AUTO”
(if equipped) position when you leave the vehicle.
Parking brake reminder chime
T32A130827-0DD91978-046D-4BBA-9DC9-E4F062F1D5B0
The chime will sound if the vehicle is driven at more
than 7 km/h (4 MPH) (models not equipped with
electronic parking brake) or 4 km/h (2 MPH) (models
equipped with el ectronic park ing brake) with the
parking brake applied. Stop the vehicle and release
the parking brake.
Instruments and controls 2-19
Condition: 'Except for China'/
(76,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-20 Instruments and controls
Stop/Start System or Idling Stop System
reminder buzzer (if equipped)
GUID-69B36B73-5D2B-4FF6-93AE-B76254D6E0C7
The engine will shift to the normal stopped state if any
of the following operations is made during Stop/Start
System or Idling Stop System activation, and the Stop/
Start System or Idling Stop System buzzer will sound
if:
. The driver’s seat belt is unfastened and the
driver’s door is open (MT models).
. The vehicle engine hood is open.
Close the hood or the driver’s door, or fasten the seat
belt then restart the engine using the ignition switch.
For more information, see “Stop/Start System or Idling
Stop System” (P.5-18).
T32A130827-3610D9C5-CE18-4747-932A-3E708FB2DA5B
JVI0641X
The vehicle information display
*
1
is located between
the tachometer and the speedometer. It displays such
items as:
. Vehicle settings
. Trip computer information
. Driver Assistance (if equipped)
. Speed limiter information (if equipped)
. Cruise control system information (if equipped)
. Intelligent Key operation information (if equipped)
. Audio information (if equipped)
. Navigation - turn by turn (if equipped)
. Indicators and warnings
. Tyre pressure information (if equipped)
. Chassis Control
. Other information
Please note that the information used in this manual is
written in UK English. There are a few differences in
the information for the UK and U.S. English versions of
the system.
For language settings, see “Language” (P.2-26).
HOW TO USE THE VEHICLE INFORMA-
TION DISPLAY
GUID-70381C67-CDDB-4575-A232-0CA687BCF4A0
Type A:
JVI0887X
The vehicle information display can be changed using
the switches
and ENTER
*
1
located on the
steering wheel.
*
1
- navigate through the items in v e hi cl e
information display
- select/enter the Vehicle information menu
items or to change from one display screen to
the next (i.e. trip, Fuel economy)
ENTER - change or select an item in the vehicle
information display
*
2
- go back to the previous menu
VEHICLE INFORMATION DISPLAY
Condition: 'Except for China'/
(77,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Type B:
JVI0886X
The vehicle information display can be changed using
the switches
*
2
and ENTER
*
1
located on the
steering wheel.
*
1
- navigate through the items in v e hi cl e
information display
ENTER - change or select an item in the vehicle
information display
*
2
- select/enter the Vehicle information menu
items or to change from one display screen to
the next (i.e. trip, Fuel economy)
*
3
- go back to the previous menu
The
switch
*
1
also controls audio and control
panel functions. For additional information, see “Steer-
ing wheel mounted controls for audio (Type B)” (P.4-
76).
STARTUP DISPLAY
GUID-E828D244-7332-4BBD-A2FA-0762846370C8
When the ignition switch is placed in the “ON”
position , the screens that display in the vehicle
information display include:
. Trip computer
. Fuel economy
. Warnings
Warnings will only display if there are any present, for
more information on warnings and indicators, see
“Vehicle information display warnings and indicators”
(P.2-28).
To control what items display in the vehicle information
display, see “Settings” (P.2-21).
SETTINGS
GUID-2255583B-12E6-48CF-ACE1-EFD05B4B73DC
The setting mode allows you to change the information
displayed in the vehicle information display:
. Driver Assistance (if equipped)
. Clock
. Display Settings
. Vehicle Settings
. Maintenance
. Alert
. Tyre Pressures (if equipped)
. Units
. Language (if equipped)
. Factory Reset
Driver Assistance (if equipped)
GUID-27D6F794-B48A-453D-AF57-C93B0459653E
To change the status, warnings or turn on or off any of
the systems/warnings displayed in the “Driver Assis-
tance” menu, use the
switch
*
1
to select and the
ENTER
*
1
to change a menu item:
. Driving Aids
. Driver Attention
. Traffic Sign
. Parking Aids
. Chassis Control
Driving Aids:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
To change the status, warnings or turn on or off any of
the systems/warnings displayed in the “Driving Aids”
menu, use the
switch
*
1
to select and the
ENTER
*
1
to change a menu item:
. Lane
— Lane Departure Warning (LDW) ON/OFF
. Blind Spot
— Blind Spot Warning (BSW) ON/OFF
. Emergency Brake
— Emergency Brake ON/OFF
Driver Attention:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Driver Attention ON/OFF
Traffic Sign:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Traffic Sign ON/OFF
Parking Aids:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
To change the status or turn on or off any of the
systems displayed in the “Parking Aids” menu, use the
switch
*
1
to select and the ENTER
*
1
to
change a menu item:
Instruments and controls 2-21
Condition: 'Except for China'/
(78,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-22 Instruments and controls
. Moving Object
— Moving Object Detection (MOD) ON/OFF
. Front Sensor
— Front parking sensor ON/OFF
. Rear Sensor
— Rear parking sensor ON/OFF
. Display
— Parking sensor display ON/OFF
. Volume
— Parking sensor buzzer volume Low/Med./High
. Range
— Parking sensor detection range Far/Mid./Near
For additional information, see “Around view monitor”
(P.4-10).
Chassis Control:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
To change the status, warnings or turn on or off any of
the systems/warnings displayed in the “Chassi s
Control” menu, use the
switch
*
1
to select
and the ENTER
*
1
to change a menu item:
. Trace Control
— See “Active Trace Control” (P.5-28) for more
information.
. Engine Brake (if equipped)
— See “Active Engine Brake (Continuously Vari-
able Transmission (CVT) models)” (P.5-28) for
more information.
Clock
GUID-5AF46434-3038-4E05-B84D-77316DA0684E
To set the clock, see “Clock” (P.4-6) or “Audio
settings” (P.4-58) in this manual or the separate
Navigation Owner’s Manual.
Display Settings
GUID-72E39564-A9E2-43D0-9D53-676FFB0D1A09
The meter settings allows the customer to choose from
the various meter selections.
The meter settings can be changed using the
*
1
and the ENTER
*
1
buttons.
Contents Selection:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The items that display when the ignition switch is
placed in the “ON” position can be enabled/disabled.
To change the items that are displayed, use the
*
1
to scroll and the ENTER
*
1
to select a menu item.
Body Colour:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The color of the vehicle that displays in the vehicle
information display when the ignition switch is placed
in the “ON” position can be changed.
1. Use the
switch
*
1
until “Body Colour” is
selected, and press ENTER
*
1
.
2. Select the body color using the
switch
*
1
and press ENTER
*
1
.
ECO Mode Settings (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This setting allows the customer to change the ECO
mode system settings.
Use the
switch
*
1
until “ECO Mode Settings” is
selected, and press ENTER
*
1
.
ECO Glow:
This setting allows the customer to enable/disable the
ambient ECO indicator in the vehicle information
display.
1. Use the
switch
*
1
to select “ECO Glow”.
2. Press the ENTER
*
1
to turn ON/OFF the
ambient ECO in the vehicle information display.
Display:
JVI0665X
This setting allows the customer to enable/disable the
ECO pedal guide function.
1. Use the
switch
*
1
to select “Display”.
2. Press the ENTER
*
1
to select “Pedal Guide” or
“Fuel econ.”.
For detailed information, see “ECO mode system”
(P.5-47).
Condition: 'Except for China'/
(79,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Stop/Start (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
To change the status, warnings or turn on or off any of
the systems/warnings displayed in the “Stop/Start”
menu, use the
switch
*
1
to select and the
ENTER
*
1
to change a menu item:
. Display
— Stop/Start display ON/OFF
. Trip CO2 saving
The “Trip CO2 saving” and engine stop time mode
shows the CO2 saving and engine stop time since
the last reset. The CO2 saving and engine stop
time can be reset by pushing the ENTER
*
1
(Type A) or
*
2
(Type B).
. Total CO2 saving
The “Total CO2 saving” and engine stop time
mode shows:
— The estimated CO2 exhaust emissions pre-
vented.
— The engine stop time that the engine has been
stopped by the “Stop/Start or Idling Stop”
System.
NOTE:
The “Total CO2 saving” and engine stop time
values cannot be reset and show accumu-
lated “Stop/Start or Idling Stop” System
information since the vehicle was built.
ECO Drive Report (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Display:
This setting allows the customer to enable/disable the
ECO Drive Report in the vehicle information display.
1. Use the
switch
*
1
to select “ECO Drive
Report”.
2. Press the ENTER
*
1
to turn ON/OFF the ECO
management display in the vehicle information
display.
View History:
This setting allows the customer to reset the past
history of the fuel economy and the best fuel economy.
Welcome Effect:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
You can choose whether or not to display the welcome
screen when the ignition switch is placed in the “ACC”
or “ON” position. You can also choose the following
items to define how the welcome screen looks:
. Dial and Pointer
. Display Effect
Select “Welcome Effects” using the
switch
*
1
and press the ENTER
*
1
to select this menu. Use the
switch
*
1
to navigate between the menu options
and press the ENTER
*
1
to turn each function ON/
OFF.
Vehicle Settings
GUID-41BC8E41-F48A-4F7F-9C6C-781FDBBDDD1D
The vehicle settings allows the customer to change
settings for the following settings.
. Lighting
. Turn Indicator
. Unlocking
. Wipers
The vehicle settings can be changed using the
*
1
, and the ENTER
*
1
switches.
Lighting:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The “Lighting” menu has the following options:
. Welcome Light
The welcome lighting can be set to be ON or OFF.
From the “Lighting” menu, select “Welcome
Light”. Use the ENTER
*
1
to turn this feature
ON or OFF.
. Int. Lamp Timer
The internal light timer can be set to be ON or
OFF. From the “Lighting” menu, select “Int. Lamp
Timer”. Use the ENTER
*
1
to turn this feature ON
or OFF.
. Auto Lights
The sensitivity of the automatic lighting can be
adjusted. From the “Lighting” menu, select “Auto
Lights”. Use the
switch
*
1
and the ENTER
*
1
to select the required sensitivity. The following
options are available:
— On Earliest
— On Earlier
— Standard
— On Later
. Headlight Off delay (if equipped)
The duration of the automatic headlights can be
change d fro m 0 to 180 seconds. F rom t he
“Lighting” menu, select “Headlight Off delay”.
Use the ENTER
*
1
to change the duration.
Turn Indicator:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The “3 Flash On” overtaking feature can be set to be
ON or OFF. From the “Turn Indicator” menu, select “3
Flash On”. Use the ENTER
*
1
to turn this feature ON
or OFF.
Unlocking:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
There are the following options in the “Unlocking”
menu:
. I–Key Door Lock
When this item is turned on, the request switch on
the door is activated. From the “Unlocking” menu,
select “I-Key Door Lock”. Use the ENTER button
to activate or deactivate this function.
Instruments and controls 2-23
Condition: 'Except for China'/
(80,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-24 Instruments and controls
. Selective Unlock
When this item is turned on, and the door handle
request switch on the driver’s or front passenger’s
side door is pushed, only the corresponding door
is unlocked. All the doors can be unlocked if the
door handle request switch is pushed again within
1 minute. When this item is turned to off, all the
doors will be unlocked when the door handle
request switch is pushed once. From the “Un-
locking” menu, select “Selective Unlock”. Use the
ENTER but ton to acti vate or deactiva te this
function.
. Answer Bk. Horn (if equipped)
When the answer back horn is on the horn will
chirp and the hazard indicators will flash once
when locking the vehicle with the Intelligent Key or
remote keyless entry function.
Wipers:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
. Speed Dependent (if equipped)
The “Speed Dependent” feature can be activated
or deactivated. From the “Wipers” menu, select
“Speed Dependent”. Use the ENTER
*
1
to turn
this feature ON or OFF.
. Rain Sensor (if equipped)
The “Rain sensor” feature can be activated or
deactivate d. From the “Wiper s” menu, select
“Rain Sensor”. Use the ENTER
*
1
to turn this
feature ON or OFF.
. Reverse Link
The “Reverse Link” wiper feature can be set to be
ON or OFF. From the “Wipers” menu, select
“Reverse Link”. Use the ENTER
*
1
to turn this
feature ON or OFF.
. Drip Wipe
The “Drip Wipe” feature can be set to be ON or
OFF. From the “Wipers” menu, select “Drip Wipe”.
Use the ENTER
*
1
to turn this feature ON or
OFF.
Maintenance
GUID-6417F271-F1CE-47F6-A581-84B3241915F7
JVI0978X
1. Service
2. Filter (if equipped)
3. Tyre
4. Other
The maintenance mode allows you to set alerts for the
reminding of maintenance intervals. To change an item:
Select “Maintenance” using the
switch
*
1
and
press ENTER
*
1
.
Service:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This indicator appears when the customer set distance
comes for changing the engine oil and filter. You can
set or reset the distance for checking or replacing
these items. For scheduled maintenance items and
intervals, see a separate maintenance booklet.
Filter (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This indicator appears when the customer set distance
comes for changing the oil filter. You can set or reset
the distance for checking or replacing these items. For
scheduled maintenance items and intervals, see a
separate maintenance booklet.
Tyre:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This indicator appears when the customer set distance
comes for replacing tires. You can set or reset the
distance for replacing tires.
WARNING:
The tire replacement indicator is not a substitute
for regular tire checks, including tire pressure
checks. See “Changing tires and wheels” (P.8-
37). Many factors including tire inflation, align-
ment, driving habits and road conditions affect
tire wear and when tires should be replaced.
Sett ing the tire replacement indicator for a
certain driving distance does not mean your
tires will last that long. Use the tire replacement
indicator as a guide only and always perform
regular tire checks. Failure to perform regular
tire checks, including tire pressure checks could
result in tire failure. Serious vehicle damage
could occur and may lead to a collision, which
could result in serious personal injury or death.
Other:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This indicator appears when the customer set distance
comes for checking or replacing maintenance items
other than the engine oil, oil filter and tires. Other
maintenance items can include such things as air filter
or tire rotation. You can set or reset the distance for
checking or replacing the items.
Condition: 'Except for China'/
(81,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Alert
GUID-E48629E9-A0E6-4E9A-8778-A498C4B794D4
This setting allows the customer to set alarms.
Select “Alert” using the
switch
*
1
and press
ENTER
*
1
.
Outside Temp. (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This setting allows the customer to enable/disable the
alert for outside temperature in the vehicle information
display.
1. Use the
switch
*
1
to se lect “Outside
Temp.”.
2. Press the ENTER
*
1
to turn ON/OFF the alert.
Timer:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This setting allows the customer to set an alert to notify
the driver that the set time has been reached.
1. Use the
switch
*
1
to select “Timer”.
2. Press the ENTER
*
1
.
3. To change the timer amount, use the
switch
*
1
and the ENTER
*
1
to save the selected time
amount.
Navigation (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This setting allows the customer to enable/disable the
alert for navigation in the vehicle information display.
1. Use the
switch
*
1
to select “Navigation”.
2. Press the ENTER
*
1
to turn ON/OFF the alert.
Phone (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This setting allows the customer to enable/disable the
alert for navigation in the vehicle information display.
1. Use the
switch
*
1
to select “Phone”.
2. Press the ENTER
*
1
to turn ON/OFF the alert.
Mail (if equipped):
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
This setting allows the customer to enable/disable the
alert for navigation in the vehicle information display.
1. Use the
switch
*
1
to select “Mail”.
2. Press the ENTER
*
1
to turn ON/OFF the alert.
Tyre pressures (if equipped)
GUID-957EC358-747F-4558-9FB7-87BF7FC0C450
The settings in the “Tyre pressures” menu are all
related to the Tyre pressure monitoring system TPMS
(See “Tire Pressure Monitoring System (TPMS)” (P.6-
2), “Tire Pressure Monitoring System (TPMS)” (P.5-4)
and “Tire Pressure Monitoring System (TPMS)” (P.8-
36).).
. Target Front
. Target Rear
. Tyre Pressure Unit
. Calibrate
Target Front:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The “Target Front” tyre pressure is the pressure
specified for the front tyres on the tyre placard (See ,
“Tire Pressure Monitoring System (TPMS)” (P.5-4) and
“Tire placard” (P.9-9).).
Use the
*
1
and the ENTER
*
1
buttons to
select and change the value for the “Target Front/
Target front” tyre pressure.
Target Rear:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The “Target Rear” tyre pressure is the pressure
specified for the rear tyres on the tyre placard (see ,
“Tire Pressure Monitoring System (TPMS)” (P.5-4) and
“Tire placard” (P.9-9).).
Use the
*
1
and the ENTER
*
1
buttons to
select and change the value for the “Target Rear” tyre
pressure.
Tyre Pressure Unit:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The unit for tyre pressure that displays in the vehicle
information display can be changed to:
. kPa
. psi
. bar
. Kgf/cm2
Use the
*
1
and the ENTER
*
1
buttons to
select and change the unit.
If necessary, refer to the following table to convert
between units.
Instruments and controls 2-25
Condition: 'Except for China'/
(82,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-26 Instruments and controls
JVI0938X
Calibrate:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The tyre pressure is affected by the temperature of the
tyre; the tyre temperature increases when the car is
driven. To be able to accurately monitor the tyre air
leakage and to prevent false TPMS warnings due to
changes in temperature, the TPMS system uses
temperature sensors in the tyres to perform tempera-
ture compensation calculations.
On rare occasions it may be necessary to recalibrate
the TPMS system reference temperature. This opera-
tion should only be performed when the actual tyre
pressure has been adjusted, whilst the current ambient
temperature is significantly different to the current
calibration temperature. (See “Tire Pressure Monitor-
ing System (TPMS)” (P.5-4).)
Use the
*
1
, and the ENTER
*
1
switches to
start or cancel the calibration process. While the
calibration process is active, the message: “Resetting
tyre pressure system” will be displayed.
Units (if equipped)
GUID-A1B343C6-49C7-4BF7-9C43-DC08E31FB329
The units that are shown in the vehicle information
display can be changed:
. Distance/Fuel
. Temperature
Use the
*
1
, and the ENTER
*
1
switches to
select and change the units of the vehicle information
display.
Distance/Fuel:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The unit for the mileage that displays in the vehicle
information display can be changed to:
. km, l/100km
. km, km/l
. miles, MPG (UK)
. miles, MPG (US)
Use the
*
1
and the ENTER
*
1
switches to
select and change the unit.
Temperature:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The temperature that displays in the vehicle information
display can be changed from:
. 8C (Celsius)
. 8F (Fahrenheit)
Use the ENTER
*
1
to toggle choices.
Language (if equipped)
GUID-761627AF-130C-43BD-83EB-A9FF585F1E70
The language of the vehicle information display can be
changed to:
Type A:
. English
. French
. German
. Italian
. Portuguese
. Dutch
. Spanish
. Turkish
. Russian
Type B:
. English
. French
. Spanish
Type C:
. English (U.S.)
. English (UK)
Use the
*
1
, and the ENTER
*
1
switches to
select and change the language of the vehicle
information display. The language of the center dis-
play/navigation can be changed independently of the
vehicle information display. For models with navigation
system, see “Vehicle information and settings (models
with navigation system)” (P.4-5). For models without
navigation system, see “Audio system” (P.4-35)
Condition: 'Except for China'/
(83,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Factory Reset
GUID-DB448A2E-FABE-4978-A5DE-79E15734EC05
The settings in the vehicle information display can be
reset back to the factory default. To reset the vehicle
information display:
1. Select “Factory Reset” using the
switch
*
1
and press the ENTER
*
1
.
2. Select “YES” to return all settings back to default
by pressing the ENTER
*
1
.
Instruments and controls 2-27
Condition: 'Except for China'/
(84,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-28 Instruments and controls
VEHICLE INFORMATION DISPLAY WARNINGS AND INDICATORS
GUID-2461129B-3328-48DC-B298-BC959F06E2D7
JVI0987X
Condition: 'Except for China'/
(85,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1. Engine start operation indicator (for Con-
tinuously Variable Transmission (CVT) mod-
els)
GUID-03FA16C2-7F50-4C9B-AF2F-B0DDC79EF70D
This indicator appears when the shift lever is in the “P”
(Park) position.
This indicator means that the engine will start by
pushing the ignition switch with the brake pedal
depressed. You can start the engine directly in any
position of the ignition switch.
2. Engine start operation indicator (for Manual
Transmission (MT) models)
GUID-93501E1D-F809-4EB5-BA32-FD9965ED01CC
This indicator means that the engine will start by
pushing the ignition switch with the clutch pedal
depressed. You can start the engine directly in any
position of the ignition switch.
You can also start the engine by pushing the ignition
switch with the brake pedal depressed when the shift
lever is in the “N” (Neutral) position.
3. Steering lock release malfunction indicator
(if equipped)
GUID-0EB33230-5508-4D15-B8B1-CAF190FF032F
This indicator appears when the steering lock cannot
be released.
If this indicator appears, push or turn the ignition
switch while lightly turning the steering wheel right and
left.
See “Steering lock” (P.5-10).
4. No Key detected warning (if equipped)
GUID-045D2E0A-90AE-4116-98D3-03BD7BDA254D
This warning appears when the door is closed with the
Intelligent Key left outside the vehicle and the ignition
switch in the “ON” posit i on. Make sure that the
Intelligent Key is inside the vehicle.
See “Intelligent Key system” (P.3-10) for more details.
5. Shift to Park warning (Continuously Vari-
able Transmission (CVT) models)
GUID-C5E02B99-2271-4B31-8A31-0E2BDA02DB7A
This warning appears when the ignition switch is
pushed to stop the engine with the shift lever in any
position except the “P” (Park) position.
If this warning appears, move the shift lever to the “P”
(Park) position or place the ignition switch in the “ON”
position.
An inside warning chime will also sound. (See
“Intelligent Key system” (P.3-10).)
6. Key battery low warning (if equipped)
GUID-4D9408BF-3C31-4AFA-B795-838BAD3AA816
This indicator appears when the Intelligent Key battery
is running out of power.
If this indicator appears, replace the battery with a new
one. See “Intelligent Key battery” (P.8-22).
7. Engine start operation for Intelligent Key
system indicator (if equipped)
GUID-793F2918-5212-4C83-B47E-E0B7BD34B2FB
This indicator appears when the Intelligent Key battery
is running out of power and when the Intelligent Key
system and vehicle are not communicating normally.
If this indicator appears, touch the ignition switch with
the Intelligent Key while depressing the brake pedal.
(See “Intelligent Key battery discharge” (P.5-11).)
8. Key ID incorrect warning (if equipped)
GUID-4DF72DD3-352F-4604-B40B-A6F805865315
This warning appears when the ignition switch is
placed from the “LOCK” position and the Intelligent
Key cannot be recognized by the system. You cannot
start the engine with an unregistered key. Use the
registered Intelligent Key.
See “Intelligent Key system” (P.3-10).
9. Release parking brake warning
GUID-713A5EF4-8333-4E87-8C99-5BE63E306339
This warning appears when the vehicle speed is above
7 km/h (4 MPH) (models not equipped with electronic
parking brake) or 4 km/h (2 MPH) (models equipped
with electronic parking brake) and the parking brake is
applied. Stop the vehicle and release the parking
brake.
10. Low fuel level warning
GUID-E3297D49-BBE6-4223-8D26-45B270C32608
This warning appears when the fuel level in the fuel
tank is getting low. Refuel as soon as it is convenient,
preferably before the fuel gauge reaches 0 (Empty).
There will be a small reserve of fuel in the tank when
the fuel gauge needle reaches 0 (Empty).
11. Door/back door open warning
GUID-4E093E87-E79D-4932-A6BA-D33021101EDB
This warning appears if any of the doors and/or the
back door are open or not closed securely. The vehicle
icon indicates which door or the back door is open on
the display.
12. Second row seat belt warning (if
equipped)
GUID-C58ACB5C-4A3A-40F4-8005-598C1067908C
This second row seat belt warning appears after
starting the engine. If any of the second row seat
passenger seat belts is not fastened, a chime will
sound and the seat icon illuminates in red to show
which seat belt is not fastened. The seat icon
illuminates in red until the corresponding second row
Instruments and controls 2-29
Condition: 'Except for China'/
(86,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-30 Instruments and controls
seat passenger’s seat belt is fastened. The warning will
automatically turn off after approximately 35 seconds.
For precautions on seat belt usage, see “Seat belts”
(P.1-9).
13. Key System Fault warning (if equipped)
GUID-45908843-CFF4-4CCD-81A0-E6055843EF07
This warning appears if there is a malfunction in the
Intelligent Key system.
If this warning appears while the engine is stopped, the
engine cannot be started. If this warning appears while
the engine is running, the vehicle can be driven.
However, contact a NISSAN dealer for repair as soon
as possible.
14. Low tyre pressure warning (if equipped)
GUID-CC56E22C-950B-4BAA-AC18-50 1ADE360704
This warning (“Low tyre pressure” and a vehicle icon -
if equipp e d ) appears when the low tire pressure
warning light in the meter illuminates and low tire
pressure is detected. The warning appears each time
the ignition switch is placed in the “ON” position as
long as the low tire pressure warning light remains
illuminated. If this warning appears, stop the vehicle
and adjust the pressure to the recommended COLD
tire pressure shown on the tire placard. (See “Low tire
pressure warning light” (P.2-14), “Tire Pressure
Monitoring System (TPMS)” (P.6-2).), “Tire Pressure
Monitoring System (TPMS)” (P.5-4) and “Tire Pressure
Monitoring System (TPMS)” (P.8-36).
15. Tyre pressure system fault warning (if
equipped)
GUID-7E94FFB8-85BA-407E-86E9-35D4440D31BF
This warning illuminates when there is a problem with
the Tyre Pressure Monitoring System (TPMS).
If this warning comes on, have the system checked by
a NISSAN deale. See “Low tire pressure warning light”
(P.2-14), “Tire Pressure Monitoring System (TPMS)”
(P.6-2).), “Tire Pressure Monitoring System (TPMS)”
(P.5-4) and “Tire Pressure Monitoring System (TPMS)”
(P.8-36).
16. Low oil pressure Stop vehicle warning (if
equipped)
GUID-4886D40C-6E1C-481A-B24B-9147222D4154
This warning appears if low engine oil pressure is
detected. If the warning appears during normal driving,
pull off the road in a safe area, stop the engine
immediately and call a NISSAN dealer.
The low oil pressure warning is not designed to
indicate a low oil level. Use the dipstick to check the oil
level. (See “Engine oil” (P.8-10).)
CAUTION:
Running the engine with the engine oil pressure
warning displayed could cause serious damage
to the engine.
17. Oil Level Low indicator (for diesel engine
model)
GUID-44E8C9EE-A550-4578-B0BC-CD9597E9BFCC
If the low level indicator is displayed, the engine oil
level is low. If the low level reminder is displayed, check
the level using the engine oil dipstick. (See “Engine oil”
(P.8-10).)
CAUTION:
The oil level should be checked regularly using
the engine oil dipstick. Operating with an
insuf ficient amo unt of oil can damage the
engine and such damage is not covered by the
warranty.
18. Oil level sensor warning (for diesel engine
model)
GUID-FCC1D74A-FEA2-43E8-A09D-25FAB64B72FF
If the oil sensor warning is displayed, the engine oil
level sensor may be malfunctioning. Contact a NISSAN
dealer immediately. For more details, see “Oil control
system (for diesel engine model)” (P.2-33).
19. 4WD system fault warning (if equipped)
GUID-744F018D-B3A0-46B9-98CE-8F22CB584FE0
This warning appears when th e four-wheel drive
(4WD) system is not functioning properly while the
engine is running. Reduce vehicle speed and have your
vehicle checked by a NISSAN dealer. See “4WD
warning” (P.5-24).
20. 4WD High Temp. Stop vehicle warning (if
equipped)
GUID-B3B19D8E-F280-4789-825F-5EC9478A9881
This warning may appear while trying to free a stuck
vehicle due to increased oil temperature. The driving
mode may change to Two-Wheel Drive (2WD). If this
warning is displayed, stop the vehicle with the engine
idling, as soon as it is safe to do so. Then if the warning
turns off, you can continue driving. See “4WD
warning” (P.5-24).
21. Tyre size incorrect warning (if equipped)
GUID-C179A579-3869-4DBE-B200-742582D81A9F
This warning may appear if there is a large difference
between the diameters of the front and rear wheels
and tires. Pull off the road in a safe area, with the
engine idling. Check that all the tire sizes are the same,
that the tire pressure is correct and that the tires are
not excessively worn. See “4WD warning” (P.5-24).
Condition: 'Except for China'/
(87,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
22. Battery Voltage Low Charge Battery
warning
GUID-1F3B1DD2-74A2-40F0-99DD-0C12928BF4BE
This warning appears when the battery voltage is low
and the battery needs to be charged.
23. Shipping Mode On Push Storage Fuse
warning
GUID-EF1876C4-3B83-41A8-8C73-D10D23C43B8F
This warning may appear if the extended storage fuse
switch is not pushed in (switched on). When this
warning appears, push in (switch on) the extended
storage fuse switch to turn off the warning. For more
information, see “Extended storage fuse switch” (P.8-
26).
24. Headlight system fault warning (if
equipped)
GUID-CB558F6A-E537-4F05-9A4F-E89B7379F99C
This warning appears if the LED headlights are
malfunctioning. Have the system checked by a
NISSAN dealer.
25. Power will turn off to save the battery
warning
GUID-3C313D28-5CFD-467B-9FC2-AD5A25FA3340
This warning appears after a period of time if the shift
lever has not moved from the “P” (Park) position while
the ignition is in the ON position for a certain period of
time.
26. Power turned off to save the battery
warning
GUID-0970ABC5-CB0F-4B5F-A533-E364CA5A37F0
This warning appears after the ignition switch is
automatically turned OFF to save the battery.
27. Turn off headlights warning
GUID-DB00B5D9-C887-4399-9B39-3A515068CC94
This warning appears when the driver side door is
opened with the headlight switch is left ON and the
ignition switch is placed in the “OFF” or “LOCK”
position. Place the headlight switch in “OFF” or
“AUTO” (if equipped) position. For additional informa-
tion, see “Headlight and turn signal switch” (P.2-39).
28. Press brake pedal warning (for electronic
parking brake equipped models)
GUID-3E2420B9-A238-4616-97EB-11057AE200E0
This indicator appears in the following situations:
. The driver tries to release the electronic parking
brak e manually without depressing the brake
pedal.
. The vehicle is stopped on a steep hill and there is
a possibility of moving backward, even if the
electronic parking brake is applied.
29-30. Time for a driver break? indicator
GUID-5B6EF421-742A-4370-B698-64A84139A090
This indicator appears when the set “Time for a driver
break?” indicator activates. You can set the time for up
to 6 hours.
31. Low outside temperature warning (if
equipped)
GUID-634EFF16-8C9D-493C-A41A-0932E824F6C2
This warning appears if the outside temperature is
below 38C (378F). The warning can be set not to be
displayed.
32. Chassis control system fault warning
GUID-F718EB94-63B5-48EE-A64D-71D88651FC6D
This warning appears if the chassis control module
detects an error in the chassis control system. Have
the system che cked by a NISS AN d ealer. (See
“Chassis control” (P.5-28).)
33. Speed limiter indicator (if equipped)
GUID-E392035D-EAB2-4999-AC5F-53B566DC53DF
This indicator shows the speed limiter system status.
The status is shown by the color.
For more details, see “Speed limiter” (P.5-41).
34. Cruise indicator (if equipped)
GUID-B56BF289-E01D-4B32-9422-294302093904
This indicator shows the cruise control system status.
The status is shown by the color.
See “Cruise control” (P.5-43) for details.
35. Continuously Variable Transmission (CVT)
position indicator (Continuously Variable
Transmission (CVT) models)
GUID-9E323961-6ABA-4FB7-B081-E0ED83362DE3
This indicator shows the automatic shift position.
In the manual shift mode, when the transmission does
not shift to the selected gear due to a transmission
protection mode, the CVT position indicator will blink
and a chime will sound.
See “Driving with Continuously Variable Transmission
(CVT)” (P.5-13) for further details.
36. ECO mode system indicator (if equipped)
GUID-B9E98019-342F-40AE-9C95-C4EB5F3AEDA6
The ECO mode indicator appears when the ECO
mode system is turned on.
(See “ECO mode system” (P.5-47).
37. System fault warning (if equipped)
GUID-188904A7-8967-4328-9B5E-8F5DDC264F2B
This warning appears when the Blind Spot Warning/
Lane Departure Warning systems are not functioning
properly. (See “Blind Spot Warning (BSW)/Lane
Departure Warning (LDW) systems” (P.5-31), “Blind
Spot Warning (BSW) system (if equipped for Europe)
” (P.5-36) or “Lane Departure Warning (LDW) system
(if equipped for Europe)” (P.5-39).)
Instruments and controls 2-31
Condition: 'Except for China'/
(88,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-32 Instruments and controls
38. System fault warning (if equipped)
GUID-43C11339-8D15-4211-B3C2-ACB48599F434
This warning a ppears when the Lane Departure
Warning system is not functioning properly. (See
“Lane Departure Warning (LDW) system (if equipped
for Europe)” (P.5-39).)
39. System fault warning (if equipped)
GUID-3B629DD1-B4DF-4353-8E61-E9312DBC4985
This warning appears when the Blind Spot Warning
system is not functioning properly. (See “Blind Spot
Warning (BSW) system (if equipped for Europe) ”
(P.5-36).)
40. Not available Clean Rear Camera warning
(if equipped)
GUID-E57C5D68-F440-4AEA-8ED4-056CE64C71DA
This warning appears if dirt, rain or snow accumulates
on the rear camera and cannot be removed by the
autom atic washer and bl ower. See “Blind Spot
Warning (BSW)/Lane Departure Warning (LDW)
systems” (P.5-31).
41. Not available Clean Rear Camera warning
(if equipped)
GUID-A081A902-5C70-4E43-B3D2-71F9A3651D69
This warning appears if dirt, rain or snow accumulates
on the rear camera and cannot be removed by the
autom atic washer and bl ower. See “Blind Spot
Warning (BSW) system (if equipped for Europe) ”
(P.5-36).
42. CVT System Fault warning (for Continu-
ously Variable Transmission (CVT) models)
GUID-CD1EE263-9177-4863-B0D7-3235AB4C2F77
This warning appears when there is a malfunction with
the CVT system. If this warning comes on, have the
system checked by a NISSAN dealer.
43. Navigation indicator (if equipped)
GUID-A0ACEBD4-5BCB-4F36-B594-C27D3C61E41C
This indicator appears when a corner point is coming.
44. Stop/Start System or Idling Stop System
indicator (if equipped)
GUID-983E95D3-0E17-413D-8088-8197FA3E767D
This indicator shows the Stop/Start System or Idling
Stop System status. See “Stop/Start System or Idling
Stop System” (P.5-18).
45. System fault warning (if equipped)
GUID-4444650A-081A-4768-8521-583068E7E6C0
This warning appears when the Driver Attention Alert
system malfunctions.
For more details, see “Driver Attention Alert” (P.2-36).
46. System fault warning (if equipped)
GUID-389FB697-B268-42F7-AF08-1A20E8CADE9C
This warning appears when the Traffic Sign Recogni-
tion system malfunctions.
For more details, see “Traffic Sign Recognition” (P.2-
37).
47. System fault warning (if equipped)
GUID-6BC03A52-AC77-4150-B41E-C37ED5C2E7C1
This warning appears when the forward emergency
braking system malfunctions.
For more details, see “Forward emergency braking
system” (P.5-45).
48. Not Available Front Radar Obstruction
warning (if equipped)
GUID-B918C838-18FC-4E97-93CB-4724CE47BDC3
If the sensor area of the front bumper is covered with
dirt or obstructed, making it impossible to detect a
vehicle ahead, the forward emergency braking system
is automatically turned off. The forward emergency
braking system warning light (orange) will illuminate
and the [Not Available Front Radar Obstruction]
warning message will appear in the vehicle information
display. If the [Not Available Front Radar Obstruction]
warning message appears, park the vehicle in a safe
location and turn the engine off.
Check to see if the sensor area of the front bumper is
blocked. If the sensor area of the front bumper is
blocked, remove the blocking material. Restart the
engine. If the warning light continues to illuminate, have
the forward emergency braking system checked by a
NISSAN dealer.
49. Not available High cabin temperature
warning (if equipped)
GUID-DACEB17F-898D-45A8-ABF0-07A342413B64
This warning appears if the interior temperature of the
vehicle has reached such a high temperature that the
sensor for the Traffic Sign Recognition and Lane
Departure warning systems can no longer function
reliably. Once the interior temperature has reached
normal levels, the warning should disappear.
If the warning continues to display, have the system
checked by a NISSAN dealer.
50. Parking Sensor System Fault warning (if
equipped)
GUID-5581C82C-9384-4E26-9F4E-254058191995
This warning illuminates when there is a problem with
the parking sensor system. If this warning comes on,
have the system checked by a NISSAN dealer.
Condition: 'Except for China'/
(89,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
OIL CONTROL SYSTEM (for diesel engine
model)
GUID-F5E35C98-7F4D-4E23-9665-7CEF2BF92803
JVI0988X
When the ignition switch is in the “ON” position,
engine oil information is displayed.
Engine oil information informs the distance to oil
change, oil level indication and malfunction of oil level
sensor.
1. Distance to oil change
GUID-0C6CE119-CD5D-44E4-907C-B28ACCB06747
The distance to oil change is displayed if the distance
to oil change is less than 1,500 km (930 miles).
2. Oil replacement indicator
GUID-537E1CBF-A948-4E30-BE63-AC30F47F8075
When the set mileage approaches, the engine oil
replacement indicator will appear on the display. After
the oil is changed, reset the distance to oil change. The
oil replacement indicator will not be reset automati-
cally. To reset this indicator, see “Settings” (P.2-21).
The distance to oil change interval cannot be adjusted
manually. The distance to oil change interval is set
automatically.
CAUTION:
If the oil replacement indicator is displayed,
change the engine oil as soon as possible.
Operating your vehicle with deteriorated oil can
damage the engine.
3. Low level reminder
GUID-B0ADD144-90CE-4C0F-BF0D-306D7D7AFEF0
If the low level indicator is displayed, the engine oil
level is low. If the low level reminder is displayed, check
the level using the engine oil dipstick. (See “Engine oil”
(P.8-10).)
CAUTION:
The oil level should be checked regularly using
the engine oil dipstick. Operating with an
insuf ficient amo unt of oil can damage the
engine and such damage is not covered by the
warranty.
4. Oil level sensor warning
GUID-A99E9E17-0261-4EDD-8396-B6B68FFB9EAF
If the oil sensor warning is displayed, the engine oil
level sensor may be malfunctioning. Contact a NISSAN
dealer immediately.
Instruments and controls 2-33
Condition: 'Except for China'/
(90,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-34 Instruments and controls
TRIP COMPUTER
GUID-16910388-C40D-4FCA-8490-D504D64878A0
JVI0986X
Condition: 'Except for China'/
(91,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
1-2. Driving aids (if equipped)
GUID-1EC5FD58-F86A-452E-A3B1-FC762082EBFC
The driving aids mode shows the operating condition
for the following systems.
. Lane Departure Warning (LDW)
. Blind Spot Warning (BSW)
. Forward Emergency Braking (if equipped)
For more details, see “Blind Spot Warning (BSW)/
Lane Departure Warning (LDW) systems” (P.5-31),
“Forward emergency braking system” (P.5-45), “Blind
Spot Warning (BSW) system (if equipped for Europe)
” (P.5-36) or “Lane Departure Warning (LDW) system
(if equipped for Europe)” (P.5-39).
3. Speed and Average speed (km/h or MPH)
GUID-2595FB2A-042A-4F44-960A-DBB6B44ECD8F
The (digital) speed shows the current speed at which
the vehicle is travelling.
The average speed mode shows the average vehicle
speed since the last reset. Resetting is done by
pushing the ENTER
*
1
(Type A) or
*
2
(Type B)
switch for longer than 1 second.
The display is updated every 30 seconds. The first 30
seconds after a reset, the display shows “—–”.
4. Average speed (km/h or MPH)
GUID-46402B30-C682-4751-94BB-468B9070A88D
The average speed mode shows the average vehicle
speed since the last reset. Resetting is done by
pushing the ENTER
*
1
(Type A) or
*
2
(Type B)
switch for longer than 1 second.
The display is updated every 30 seconds. The first 30
seconds after a reset, the display shows “—–”.
5-6. Elapsed time and trip odometer (km or
mile)
GUID-29620F29-C173-4C39-8FA4-0268AD527CD3
Elapsed time:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The elapsed time mode shows the time since the last
reset. The displayed time can be reset by pushing the
ENTER
*
1
(Type A) or
*
2
(Type B) switch for
longer than 1 second. (The trip odometer is also reset
at the same time.)
Trip odometer:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The trip odometer mode shows the total distance the
vehicle has been driven since the last reset. Resetting
is done by pushing the ENTER
*
1
(Type A) or
*
2
(Type B) switch for longer than 1 second. (The
elapsed time is also reset at the same time.)
7. Distance to empty (dte — km or mile)
GUID-D8755900-BA82-4CA1-B137-5DF6AF6576DD
The distance to empty (dte) mode provides you with an
estimation of the distance that can be driven before
refueling. The dte is constantly being calculated, based
on the amount of fuel in the fuel tank and the actual fuel
consumption.
The display is updated every 30 seconds.
The dte mode includes a low range warning feature. If
the fuel level is low, the warning is displayed on the
screen.
When the fuel level drops even lower, the dte display
will change to “——”.
. If the amount of fuel added is small, the display
just before the ignition switch is placed in the
“OFF” position may continue to be displayed.
. When driving uphill or rounding curves, the fuel in
the tank shifts, which may momentarily change the
display.
8-9. Fuel economy (l (litre)/100 km, km/l(litre)
or MPG)
GUID-B5D9FEEB-074C-4E3A-A0E2-8E0268A990C7
Current fuel consumption:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The current fuel consumption mode shows the current
fuel consumption.
Average fuel consumption:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Th e average fuel consumption mode shows the
average fuel consumption since the last reset. Reset-
ting is done by pushing the ENTER
*
1
(Type A) or
*
2
(Type B) switch for longer than 1 second.
The display is updated every 30 seconds. For about
the first 500 m (1/3 mile) after a reset, the display
shows “——”.
10. Audio (if equipped)
GUID-29443D83-E73B-4CAE-AEA0-08FD317D9E5B
The audio mode shows the status of audio information.
11. Navigation (if equipped)
GUID-A164C653-CED8-49F4-8576-81E50749D665
When the route guidance is set in the navigation
system, this item shows the navigation route informa-
tion.
12. Compass (if equipped)
GUID-BD7DB697-776A-4539-A5A9-55381B2AD02D
This display indicates the heading direction of the
vehicle.
13. “4x4-i” display (if equipped)
GUID-6160F57A-6E13-4425-B26D-6825D16A12CD
When the “4x4-i” display is selected, you can view the
distribution ratio of the transmission torque to the front
and rear wheels during driving.
Instruments and controls 2-35
Condition: 'Except for China'/
(92,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-36 Instruments and controls
14. Chassis control
GUID-869FF358-E269-4A5A-BA18-1921FD93603F
When Active Trace Control, Active Engine Brake or
Active Ride Control system is operated, it shows the
operating condition. It also shows operating condition
of Hill Start Assist or the Hill Descent Control. See
“Active Trace Control” (P.5-28), “Active Engine Brake
(Continuously Variable Transmission (CVT) models)”
(P.5-28), “Active Ride Control” (P.5-29), “Hill Start
Assist system” (P.5-30) or “Hill descent co ntrol
system” (P.5-30) for more details.
15. Tyre Pressures (if equipped)
GUID-0023E777-0057-4349-9A1D-2E51F69EEB28
The tire pressure mode shows the pressure of all four
tyres while the vehicle is driven.
When the Low Tyre Pressure warning appears, the
display can be switched to the tire pressure mode by
pushing the ENTER switch
*
1
to reveal additional
details on the displayed warning.
16. Driver Attention Alert system (if equipped)
GUID-36827261-8F9C-4388-9529-475E767E148C
When the “Driver Attention Alert” display is selected,
you can view your attention level as detected by the
system. For more information see “Driver Attention
Alert” (P.2-36).
17. Stop/Start System or Idling Stop System
(if equipped)
GUID-258D3265-C574-4352-9FED-EB219DF828CE
The Stop/Start System or Idling Stop System mode
shows the CO2 or fuel savings and the engine stop
time. (See “Stop/Start System or Idling Stop System”
(P.5-18).)
Trip CO2 or fuel saving and engine stop time:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The trip CO2 or fuel saving and engine stop time mode
shows amount of CO2 or fuel saved and the engine
stop time since the last reset.
The CO2 or fuel saving and engine stop time can be
reset by pushing the ENTER switch
*
1
(Type A) or
*
2
(Type B) in the “Stop/Start” menu. For more
information, see “Display Settings” (P.2-22).
Total CO2 or fuel saving and engine stop time:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The total CO2 or fuel saving and engine stop time
mode shows:
. The estimated CO2 exhaust emissions prevented.
(for Europe and South Africa)
. The estimated quantity of saved fuel. (for Australia
and New Zealand)
. The time that the engine has been stopped for by
the Stop/Start System or Idling Stop System.
NOTE:
The Total CO2 or fuel saving and engine stop
time values cannot be reset and show accumu-
lated Stop/Start System or Idling Stop System
information since the vehicle was built.
18. Traffic Sign Recognition (if equipped)
GUID-C22DF58C-CD47-45F9-8CFC-2B5D3E42F62D
The Traffic Sign Recognition (TSR) system provides
the driver with information about the most recently
detected speed limit. For more details, see “Traffic
Sign Recognition” (P.2-37).
CLOCK AND OUTSIDE AIR TEMPERATURE
GUID-E27E1606-2B37-4B43-92B1-ED0349E35346
JVI0932X
The clock
*
1
and outside air temperature
*
2
are
displayed on the upper side of the vehicle information
display.
Clock
T32A130827-CA60079E-C0A7-4156-9588-074D8F0DC1C9
For clock adjustment, see “Clock” (P.4-6) or “Audio
settings” (P.4-58).
Outside air temperature (8C or 8F )
GUID-7885796A-D264-4AB0-9D1B-EA2294C088A3
The outside air temperature is displayed in 8C or 8F in
the range of −40 to 608C (−40 to 1408F ).
The outside air temperature mode includes a low
temperature warning feature. If the outside air tem-
perature is below 38C (378F), the warning
*
3
is
displayed on the screen (if equipped).
The outside temperature sensor is located in front of
the radiator. The sensor may be affected by road or
engine heat, wind directions and other driving condi-
tions. The display may differ from the actual outside
temperature or the temperature displayed on various
signs or billboards.
DRIVER ATTENTION ALERT (if equipped)
GUID-3F4DD0FC-EDBD-4CCC-8B0E-DA2B1513CDD0
The [Driver Attention] option can be used to activate or
deactivate the Driver Attention Support feature. This
system is able to detect whether t he driver is
displaying a lack of attention, or is distracted.
It does this by monitoring driving style, and steering
behavior, and it notes deviations from the normal
pattern. If the system detects that driver attention is
decreasing, the system uses an audible and visual
warning to suggest that the driver take a break.
WARNING:
This system is not designed to assist driving
impaired due to fatigue, or other causes. Be
attentive at all times, and avoid driving when
Condition: 'Except for China'/
(93,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
tired. Failure to do so could cause you to lose
control of the vehicle, resulting in a serious
accident.
System operation
GUID-0B3AD093-EEF1-40B9-8695-B2ABA1B786CC
JVI0991X
If the system detects that driver attention is decreas-
ing, the message “Time for a driver break?” appears in
the vehicle information display and a buzzer sounds
when the vehicle is driven at speeds above 60 km/h
(37 MPH).
Attention level indicator:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVI0992X
When the “Driver attention” display is selected, you
can view your attention level as detected by the
system.
For more information see “Settings” (P.2-21).
NOTE:
. The attention level indicator consists of
eight levels.
. When stopping the engine, the system is
reset.
Turning the Driver Attention Alert system on
and off
GUID-CAEA4B27-0BBE-4162-989F-3A0A3B28B80C
To activate or deactivate this function, see “Settings”
(P.2-21).
NOTE:
The setting will be retained even if the engine is
restarted.
System Malfunction
GUID-9B32811F-1E3D-485A-BE8E-BEE91D110087
If the Driver Attention Alert system malfunctions, the
system warning message will appear in the vehicle
information display and the function will be stopped
automatically.
Action to take:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
Stop the vehicle in a safe location, and then turn off
and restart the engine. If the system warning message
continues to appear, have the system checked by a
NISSAN dealer.
TRAFFIC SIGN RECOGNITION (if equipped)
GUID-B4DC19B1-EA1A-43B9-940E-735647D4C6F8
JVI0975X
The Traffic Sign Recognition (TSR) system provides
the driver with information about the most recently
detected speed limit. The system captures the road
sign information with the multi-sensing front camera
unit
*
1
located on the windshield in front of the inside
rearview mirror and displays the detected signs in the
vehicle information display. For vehicles equipped with
navigation system, the speed limit displayed is based
on a combination of navigation system data and live
camera recognition. TSR information is always dis-
played at the top of the vehicle information display, and
optionally in the main central area of the display screen.
WARNING:
The TSR system is only intended to be a support
device to provide the driver with information. It
is not a replacement for the driver’s attention to
traf fic conditions or responsibility to dr ive
safely. It cannot prevent accidents due to care-
lessness. It is the driver’s responsibility to stay
alert and drive safely at all times.
Instruments and controls 2-37
Condition: 'Except for China'/
(94,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-38 Instruments and controls
System operation
GUID-7C2EFAA2-1216-43AB-AED6-957C5B6F668D
The traffic recognition system displays the following
types of road sign:
JVI1004X
JVI0973X
*
A
Latest detected speed limit.
*
B
National speed limit
*
C
No speed limit information.
*
D
No-overtaking zone.
*
E
End of no-overtaking zone.
*
F
Conditional speed limit, with the following
available conditions:
*
G
Snow
*
H
Slip (rain 1)
*
I
Rain (rain 2)
*
J
Towing
*
K
Generic
CAUTION:
. The Traffic Sign Recognition (TSR) system is
intended as an aid to careful driving. It is the
driver’s responsibility to stay alert, drive
safely, and observe all road regulations that
currently apply, including looking out for
road signs.
. The Traffic Sign Recognition (TSR) system
may not function properly under the follow-
ing conditions:
— When rain, snow or dirt adheres to the
windshield in front of the TSR camera
unit.
— When the headlights are not bright due
to dirt on the lens or if the aiming is not
adjusted properly.
— When strong light enters the camera
unit. (For ex ample, the light directly
shines on the front of the vehicle at
sunrise or sunset.)
— When a sudden change in brightness
occurs. (For example, when the vehicle
enters or exits a tunnel or under a
bridge.)
— In areas not covered by the navigation
system.
— If there are deviations in relation to the
navigation, for example due to changes
in the road routing.
— When overtaking buses or trucks with
speed stickers.
Condition: 'Except for China'/
(95,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Turning the TSR system on and off
GUID-1E6BCBF6-FF04-4185-8DA1-454630A7E519
Turning the LDW system on or off is done using the
[Settings] menu in the vehicle information display. For
details, see “Vehicle information display” (P.2-20).
Perform the following steps to enable or disable the
TSR system:
1. In the [Settings] menu, select the [Driver Assis-
tance] key.
2. Touch [Traffic Sign] to turn the system ON/OFF.
System temporarily unavailable
GUID-BA4EC994-FA78-43F4-8A11-6FA33E2CC5A5
If the vehicle is parked in direct sunlight under high
temperature conditions (over approxima tely 408C
(1048F ) and then started, the TSR system may be
deactivated automatically. The [Not available high
cabin temperature] warning message will appear in
the vehicle information display.
Action to take:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
When the interior temperature is reduced, the TSR
system will resume operating automatically.
System Malfunction
GUID-CB9A153C-B940-4796-BEC6-E0CED93B2DA4
If the TSR system malfunctions it will be turned off
automatically and the system [Malfunction]/[System
error] warning message will appear in the vehicle
information display.
Action to take:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
If the TSR [Malfunction]/[System error] m essage
appears, pull off the road at a safe location and stop
the vehicle. Turn the engine off and restart the engine.
If the TSR [Malfunction]/[System error] m essage
continues to appear, have the system checked by a
NISSAN dealer.
Maintenance
GUID-4011F179-FBB0-4982-88ED-C90E38F62B76
The TSR uses the same multi-sensing front camera
unit that is used by the Lane Departure Warning
(LDW) system, located in front of the interior rearview
mirror. For maintenance of the camera, see “Multi-
sensing camera unit maintenance” (P.5-41).
T32A130827-AE66DA86-EADA-49AF-BE4F-98EA59F26D29
HEADLIGHT SWITCH
T32A130827-2D45301A-C88C-4C7B-B333-62ABD6D576C9
JVI0854X
Type A
JVI0859X
Type B
NISSAN r ecommends that you consult the lo cal
regulations concerning the use of lights.
position
T32A130827-22A6378D-658B-4901-AA34-6B632DCB958D
The position turns on the front clearance, tail,
license plate and instrument panel lights.
Instruments and controls 2-39
HEADLIGHT AND TURN SIGNAL
SWITCH
Condition: 'Except for China'/
(96,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-40 Instruments and controls
position
T32A130827-7DA4961D-ADB9-48C2-AF3E-CB8FF4FAA66E
The position turns on the headlights in addition to
the other lights.
AUTO position (if equipped)
T32A130827-42005CFF-F09D-4D2E-B51A-EA900BA8AB95
When the ignition switch is in the “ON” position and
the headlight switch is in the “AUTO” position, the
headlights, front clearance lights, instrument panel
lights, rear combination lights and other lights turn on
automatically depending on the brightness of the
surroundings.
The headlights will turn on automatically at twilight or in
rainy weather (when the windshield wiper is operated
continuously).
When the ignition switch is placed in the “LOCK” or
“OFF” position, the lights will turn off automatically.
JVI0510X
CAUTION:
Do not place any objects on top of the sensor
*
A
. The sensor senses the brightness level and
controls the autolight function. If the sensor is
covered, it reacts as if it is dark, and the
headlights will illuminate.
Headlight beam
T32A130827-9CEFEA7E-F212-4D2D-A4BD-2DF2318D931E
JVI0856X
Type A
JVI0994X
Type B
To turn on the high beam, push the lever towards the
front position
*
1
.
To turn off the high beam, return the lever to the neutral
position
*
2
.
To flash the headlights, pull the lever towards the
rearmost position
*
3
. The headlights can be flashed
even when the headlights are not on.
If equipped, when the lever is pulled towards the
rearmost position
*
3
after th e ignition switch is
placed in the “OFF” or “LOCK” position, the headlight
will turn on and stay on for 30 seconds. The lever can
be pulled 4 times for up to 2 minutes.
High beam assist (if equipped)
GUID-A9E44EB1-B8C0-468F-A5B4-1A9C35090997
The high beam assist system will operate when the
vehicle is driven at speeds of approximately 40 km/h
(25 MPH) and above. If an oncoming vehicle or leading
vehicle appears in front of your vehicle when the
headlight high b eam is on, the hea d light will be
switched to the low beam automatically.
Precautions on high beam assist:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
WARNING:
. The high beam assist system is a conve-
nience but it is not a substitute for safe
driving operation. The driver should remain
alert at all times, ensure safe driving prac-
tices and switch the high beam and low
beam manually when necessary.
. The high beam or low beam may not switch
automatically under the following condi-
tions. Switch the high beam and low beam
manually.
— Du ring bad weather (rain, fog, snow,
wind, etc.).
— When a light source similar to a head-
light or tail light is in the vicinity of the
vehicle.
— When the headlights of the oncoming
vehicle or the leading vehicle are turned
off, when the color of the light is
affected due to foreign materials on
the lights, or when the light beam is
out of position.
Condition: 'Except for China'/
(97,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
— When there is a sudden, cont inuo us
change in brightness.
— When driving on a road that passes over
rolling hills, or a road that has level
differences.
— When driving on a road with many
curves.
— When a sign or mirror-like surface is
reflecting intense light towards the front
of the vehicle.
— When the container, etc. being towed by
a leading vehicle is reflecting intense
light.
— When a he a d l i g h t on your vehicle is
damaged or dirty.
— When the vehicle is leaning at an angle
due to a punctured tire, being towed,
etc.
. The timing of switching the low beam and
high beam may change under the following
situations.
— The brightness of the headlights of the
oncoming vehicle or leading vehicle.
— The movement and direction of the
oncoming vehicle and the leading vehi-
cle.
— When only one light on the oncoming
vehicle or the leading vehicle is illumi-
nated.
— When the oncoming vehicle or the lead-
ing vehicle is a two-wheeled vehicle.
— Road conditions (incline, curve, the road
surface, etc.).
— The number of passengers and the
amount of luggage.
High beam assist operations:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVI0974X
Type A
JVI0996X
Type B
To activate the high beam assist system, turn the
headlight switch to the “AUTO” position
*
1
and push
the lever forward
*
2
(high beam position). The high
beam assist indicator light in the meter will illuminate
while the headlights are turned on.
If the high beam assist indicator light d oes not
illuminate in the above condition, it may indicate that
the system is not functioning properly. Have the system
checked by a NISSAN dealer.
When the vehicle speed lowers to less than approxi-
mately 25 km/h (16 MPH), the headlight remains the
low beam.
To turn off the high beam assist system, turn the
headlight switch to the
position or select the low
beam position by placing the lever in the neutral
position.
Ambient image sensor maintenance:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
JVI0975X
The ambient image sensor
*
1
for the high beam
assist system is located in front of the inside rearview
mirror. To keep the proper operation of the high beam
assist system and prevent a system malfunction, be
sure to observe the following:
. Always keep the windshield clean.
. Do not attach a sticker (including transparent
material) or install an accessory near the ambient
image sensor.
. Do not strike or damage the areas around the
ambient image sensor. Do not touch the sensor
lens that is located on the ambient image sensor.
If the ambient image sensor is damaged due to an
Instruments and controls 2-41
Condition: 'Except for China'/
(98,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-42 Instruments and controls
accident, contact a NISSAN dealer.
Daytime running light system
T32A130827-03F4324C-0702-4A59-BBC8-01F30381336D
Even if the headlight switch is * position, the daytime
running lights will come on after starting the engine.
When the light switch is turned to the
position, the
daytime running light will turn off.
HEADLIGHT AIMING CONTROL
T32A130827-A1D7D009-92AF-4459-81E1-BE4387A95870
JVI0477X
Manual type
T32A130827-76E07AD9-CA96-44FA-AB9E-4D2046E5D9 1B
The headlight aiming control operates wh en the
ignition switch is in the “ON” position and the headlight
is on to allow the headlight axis to be adjusted
according to the driving condition.
When driving with no heavy load/luggage or driving on
a flat road, select the normal position “0”.
If the number of occupants and load/luggage in the
vehicle changes, the headlight axis may become higher
than normal.
If the vehicle is traveling on a hilly road, the headlights
may directly shine on the rearview and outside mirrors
of a vehicle ahead or the windshield of an oncoming
vehicle, which may obscure other drivers’ vision.
To adjust to the proper aiming height, turn the switch
accordingly. The higher the number, designated on the
switch, the lower the headlight axis.
Select the switch position by referring to the following
samples.
Condition: 'Except for China'/
(99,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Two-row model
Switch posi-
tion
Number of
front seat
occupants
Number of
rear seat oc-
cupants
Weight of load in luggage compartment [APPROX. kg ( lb )]
2WD
4WD
MR20 QR25 R9M MR20 QR25
R9M
MT M-CVT CVT M-CVT CVT MT M-CVT M-CVT CVT M-CVT CVT
MT
0 1 or 2
No occu-
pants
No load
1 2
3
2 2 3
102 kg
(225 lb)
111 kg
(245 lb)
65 kg
(143 lb)
120 kg
(265 lb)
64 kg
(141 lb)
170 kg
(375 lb)
178 kg
(392 lb)
117 kg
(258 lb)
75 kg
(165 lb)
152 kg
(335 lb)
123 kg
(271 lb)
252 kg
(556 lb)
3 1
No occu-
pants
305 kg
(673 lb)
318 kg
(701 lb)
251 kg
(553 lb)
318 kg
(701 lb)
266 kg
(587 lb)
365 kg
(805 lb)
371 kg
(818 lb)
322 kg
(710 lb)
269 kg
(593 lb)
359 kg
(792 lb)
332 kg
(732 lb)
436 kg
(961 lb)
Three-row model
Switch posi-
tion
Number of
front seat
occupants
Number of
second row
seat occu-
pants
Number of
third row
seat occu-
pants
Weight of load in luggage compartment [APPROX. kg ( lb )]
2WD
4WD
MR20 QR25 R9M QR25
R9M
MT M-CVT CVT M-CVT CVT MT M-CVT M-CVT
MT
0 1 or 2
No occu-
pants
No occu-
pants
No load
1 2
No occu-
pants or 3
2
2 2 3 2
95 kg
(209 lb)
62 kg
(137 lb)
61 kg
(135 lb)
134 kg
(295 lb)
57 kg
(126 lb)
137 kg
(302 lb)
142 kg
(313 lb)
30 kg (66
lb)
141 kg
(311 lb)
3 1
No occu-
pants
No occu-
pants
472 kg
(1041 lb)
438 kg
(966 lb)
428 kg
(944 lb)
509 kg
(1122 lb)
420 kg
(926 lb)
524 kg
(1155 lb)
515 kg
(1136 lb)
474 kg
(1045 lb)
525 kg
(1158 lb)
Instruments and controls 2-43
Condition: 'Except for China'/
(100,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-44 Instruments and controls
Automatic type
T32A130827-66387FF4-1CC3-4BDA-8563-27530E2881E3
The headlights are equipped with the automatic
leveling system. Headlight axis is controlled automati-
cally.
BATTERY SAVER SYSTEM
T32A130827-61CE9F9B-3E2D-4043-B79E-11558E12A2B4
The light reminder chime will sound if the headlight
switch is in either the
or position and when
the driver’s door is opened with the ignition switch in
the “OFF” or “LOCK” position.
Type A:
If the ignition switch is placed in “OFF” or “LOCK”
position while the headlight switch is in the
or
position, the battery saver function will turn off the
lights after a period of time to prevent the battery from
being discharged. The lights will turn on when the
doors are being opened.
Type B:
If the ignition switch is placed in “OFF” or “LOCK”
position while the headlight switch is in the
or
position, the battery saver function will turn off the
lights after opening the driver’s side door.
HEADLIGHT CLEANER (if equipped)
GUID-1CA84B69-AE3D-46F1-9857-AC539E6ACDC6
JVI1002X
Headlight cleaner switch (if equipped)
The headlight cleaner operates when the headlight is
on and the ignition switch is in the “ON” position.
To operate the headlight cleaner:
. Push the headlight cleaner switch (if equipped)
. Pull the windshield washer switch toward you.
— The headlight cleaner operates with the wind-
shield washer operation. This operation acti-
vates once each time either the ignition switch
or the headlight switch is turned off and on.
— After the first operation, the headlight cleaner
operates once at every fifth operation of the
windshield washer.
See “Wiper and washer switch” (P.2-47).
CAUTION:
. Do not operate the washer if the window
washer fluid reservoir is empty.
TURN SIGNAL SWITCH
T32A130827-37FAA258-280A-4947-AF44-BF748654C1C2
JVI0857X
Type A
JVI0995X
Type B
CAUTION:
The turn signal switch will not be cancelled
automatically if the steering wheel turning angle
does not exceed the preset amount. After the
turn or lane change, make sure that the turn
signal switch is returned to its original position.
Condition: 'Except for China'/
(101,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Turn signal
T32A130827-5BE2C8F7-D44C-41AB-B53D-C802061908CD
To turn on the turn signals, move the lever up
*
1
or
down
*
2
to the point where the lever latches. When
the turn is completed, the turn s ignal ca ncels
automatically.
Lane change signal
T32A130827-981A7A50-4AE5-481D-B72E-E0D87654F291
To turn on the lane change signals, move the lever up
*
1
or down
*
2
to the point where the light begins to
flash.
If the lever is moved back right after moving up
*
1
or
down
*
2
, the light will flash 3 times.
To cancel the flashing, move the lever to the opposite
direction.
GUID-3B47D7DC-9913-43F1-A443-6B187DAD016B
JVI0861X
Type A
JVI0954X
Type B
JVI0980X
Type C
JVI0862X
Type D
Instruments and controls 2-45
FOG LIGHT SWITCH
Condition: 'Except for China'/
(102,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-46 Instruments and controls
JVI0984X
Type E
JVI0985X
Type F
FRONT FOG LIGHTS (if equipped)
GUID-DBA58794-DD85-47C1-93E1-2D8E6F467795
For models with rear fog light :
To turn on the front fog lights, turn the headlight switch
to the
or or AUTO (if equipped) position,
then turn the fog light switch to the
position. The
front fog lights and
indicator light on the meter
illuminate. The fog light switch will return to the
position automatically.
To turn the front fog lights off, turn the fog light switch
to the
position again.
For models without rear fog light:
To turn on the front fog lights, turn the headlight switch
to the
or or AUTO (if equipped) position,
then turn the fog light switch to the
position. The
front fog lights and
indicator light on the meter
illuminate.
To turn the front fog lights off, turn the fog light switch
to the
position.
NOTE:
. If the headlight switch is turned to the *
position, the front fog lights will turn off
automatically.
REAR FOG LIGHT (if equipped)
GUID-327084C4-B4BF-49C3-9337-D3EF86067523
The rear fog light should be used only when visibility is
seriously reduced [generally, to less than 100 m (328
ft)].
For Europe and South Africa
To turn on the rear fog light, turn the headlight switch
to the
or AUTO (if equipped) position, then turn
the fog light switch to the
position. The rear fog
light and
indicator light on the meter illuminate.
The fog light switch will return to the
position
automatically.
If the front fog lights (if equipped) are already turned on
with the headlight switch in the
position, you can
turn on the rear fog light without first turning the
headlight switch to the
or AUTO (if equipped)
position.
To turn the rear fog light off, turn the fog light switch to
the
position again.
Except for Europe and South Africa
To turn on the rear fog light, turn the headlight switch
to the
position, then turn the fog light switch to
the
position. The rear fog light and indicator
light on the meter illuminate. The fog light switch will
return to the
position automatically.
If the front fog lights (if equipped) are already turned on
with the headlight switch in the
position, you can
turn on the rear fog light without first turning the
headlight switch to the
position.
To turn the rear fog light off, turn the fog light switch to
the
position again.
NOTE:
. If the headlight switch is turned to the *
position, the rear fog light will turn off
automatically.
Condition: 'Except for China'/
(103,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
T32A130827-1EE98D4A-158D-4D39-AA9E-F0F04B3A53A0
WARNING:
In freezing temperatures, the washer fluid may
freeze on the windshield and obscure your
vision. Warm the windshield with the defogger
before you wash the windshield.
CAUTION:
. Do not operate the washer continuously for
longer than 30 seconds.
. Do not operate the washer if the window
washer reservoir is empty.
WINDSHIELD WIPER AND WASHER
SWITCH
T32A130827-2B778B45-020B-4A03-9608-5BA1725AAFA9
JVI0953X
Type A
JVI0865X
Type B
JVI0977X
Type C
JVI0863X
Type D
The windshield wiper and washer operate when the
ignition switch is in the “ON” position.
Wiper operation
T32A130827-D1294B0D-8236-463B-992C-CBCCBDA2383A
The lever p osition “AUTO” (Type A/Type C)
*
1
operates the rain-sensing auto wiper system (if
equipped). (See “Rain-sensing auto wiper system”
(P.2-48).)
The lever position “
” (INT)
*
1
(Type B/Type D)
operates the wiper intermittently.
. The intermittent operation can be adjusted by
turning the adjustment control knob, (longer)
*
A
or (shorter)
*
B
.
. The speed of the intermittent operation varies
depending on the vehicle speed. (if equipped).
The lever position
*
2
operates the wiper at low
speed.
The lever position
*
3
operates the wiper at high
speed.
To stop the wiper operation, move the lever up to the
“OFF” position.
The lever position
*
4
operates the wiper one sweep.
The lever automatically returns to its original position.
If the windshield wiper operation is interrupted
by snow or ice, the wiper may stop moving to
protect its motor. If this occurs, turn the wiper
switch to the “OFF” position and remove the
snow or ice on and around the wiper arms. In
approximately 1 minute, turn the switch on again
to operate the wiper.
Pulling up the wiper arm:
The wiper arm should be in the up position when
replacing the wiper.
To pull up the wiper arm, push the lever
*
4
up twice
(within 0.5 seconds) when the ignition switch is in the
“OFF” position within 1 minute. The wiper operation
Instruments and controls 2-47
WIPER AND WASHER SWITCH
Condition: 'Except for China'/
(104,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-48 Instruments and controls
stops in mid-operation.
To replace the wiper arm, place the wiper arm in the
down position and then push the lever
*
4
up once.
CAUTION:
. This function can be operated even if the
ignition switch is in the “ ON” position.
However, to prevent an accident or damage
when pulling up the wiper arm, be sure to
observe the following precautions.
— Make sure the shift lever is in the P
(Park) position (Continuously Variable
Transmission models).
— Make sure the shift lever is in the N
(Neut ral) position, wit h the parking
brake fully applied (Manual Transmis-
sion models).
— Never allow the passengers to operate
the windshield wip er switch inadver-
tently.
. Do not operate the windshield wiper while
the wiper arm is pulled up. The wiper arm
may be damaged.
Washer operation
T32A130827-21697BAD-DFC6-4CEF-960C-0801925AAFF9
To operate the washer, pull the lever toward the rear of
the vehicle
*
5
until the desired amount of washer fluid
is spread on the windshield.
The headlight cleaner (if equipped) will also operate
with operation of the windshield washer. See “Head-
light cleaner” (P.2-44).
Wiper drip wipe system:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
The wiper will also operate once about 3 seconds after
the washer and wiper are operated. This operation is to
wipe washer fluid that has dripped on the windshield.
To activate or deactivate this function, see “Settings”
(P.2-21).
RAIN-SENSING AUTO WIPER SYSTEM (if
equipped)
T32A130827-BB2BDD70-8BF2-41F6-9D29-E9D90CC5CEE6
JVI0866X
Type A
JVI0997X
Type B
The rain-sensing auto wiper system can automatically
turn on the wipers and adjust the wiper speed
depending on the rainfall and the vehicle speed by
using the rain sensor located on the upper part of the
windshield.
To set the rain-sensing auto wiper system, push the
lever down to the AUTO position
*
1
. The wiper will
sweep once while the ignition switch is in the “ON”
position.
The rain sensor sensitivity level can be adjusted by
turning the knob toward the front
*
2
(High) or toward
the rear
*
3
(Low).
. High — High sensitive operation
. Low — Low sensitive operation
To turn the rain-sensing auto wiper system off, push up
the lever to the “OFF” position, or pull down the lever
to the other.
CAUTION:
. Do not touch the rain sensor and around it
when the wiper switch is in the AUTO
position and the ignition switch is in the
“ON” posi ti on. The wipers may operate
unexpectedly and cause to an injury or a
wiper damage.
. When the windshield glass is coated with
water repellent, the speed of the rain-sen-
sing auto wipers may be higher even though
the amount of the rainfall is small.
. Be sure to turn off the rain-sensing auto
wiper system when you use a car wash.
. The rain-sensing auto wipers may not oper-
ate if rain does not hit the rain sensor even if
it is raining.
. Using genuine wiper blades is recom-
mended for proper operation of the rain-
sensing auto wiper system. (See “Wiper
blades” (P.8-18) for wiper blade replace-
Condition: 'Except for China'/
(105,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
ment.)
REAR WINDOW WIPER AND WASHER
SWITCH
T32A130827-4C617F31-4B30-425D-87B8-DF9083199118
JVI0867X
Type A
JVI0869X
Type B
The rear window wiper and washer operates when the
ignition switch is in the “ON” position.
Wiper operation
T32A130827-B8D89237-EB4C-43BA-832C-691E9613E0F4
The switch position
*
1
operates the wiper intermit-
tently.
The switch position
*
2
operates the wiper at low
speed.
If the rear window wiper operation is interrupted
by snow or ice, the wiper may stop moving to
protect its motor. If this occurs, turn the wiper
switch to the “OFF” position and remove the
snow or ice on and around the wiper arms. In
approximately 1 minute, turn the switch on again
to operate the wiper.
Reverse synchronization function:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
When the windshield wiper switch is on, moving the
shift lever to the “R” (Reverse) position will operate the
rear window wiper.
To activate or deactivate this function, see “Settings”
(P.2-21).
Washer operation
T32A130827-76F30BBF-65C7-4181-A6A7-B95992B8E679
To operate the washer, push the lever toward the front
of the vehicle
*
3
until the desired amount of washer
fluid is spread on the windshield. The wiper will
automatically operate several times.
T32A130827-153D9946-AD51-4545-B9EB-100B3DBFEAE2
JVI0852X
Type A (Example)
JVI0853X
Type B
JVI1009X
Type C
The defogger switch operates when the ignition switch
is in the “ON” position.
Instruments and controls 2-49
DEFOGGER SWITCH
Condition: 'Except for China'/
(106,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-50 Instruments and controls
The defogger is used to reduce the moisture, fog or
frost on the rear window and outside door mirror (if
equipped) surface to improve the rear view.
When the defogger switch is pushed, the indicator
light
*
A
illuminates and the rear window defogger
operates for approximately 15 minutes. After the preset
time has passed, the defogger will turn off automati-
cally.
To turn off manually, push the defogger switch again.
CAUTION:
. When operating the defogger continuously,
be sure to start the engine. Otherwise, it may
cause the battery to discharge.
. When cleaning the inner side of the window,
be careful not to scratch or damage the
electrical conductors on the surface of the
window.
NOTE:
When the rear defogger is turned on, the Stop/
Start System or Idling Stop System (if equipped)
will not be activated.
T32A130827-00D4E9A3-D73F-4C95-82A9-CA964C18969F
JVI0851X
The horn switch operates regardless of the ignition
switch position except when the battery is discharged.
When the horn switch is pushed and held, the horn will
sound. Releasing the horn switch will cease the horn
sound.
T32A130827-5DF6A5BA-A5E1-4D32-A1B7-F6FB2C3D4E69
POWER WINDOWS
T32A130827-935286CD-5D98-4FE4-91F9-05502586F0C5
WARNING:
. Make sure that all passengers have their
hands, etc. inside the vehicle before operat-
ing the power windows.
. Never leave children or adults who would
normally require the support of others alone
in the vehicle. They could unknowingly
activate switches or controls and inadver-
tently become involved in an accident.
The power windows operate when the ignition switch
is in the “ON” position.
To open a window, push down the power window
switch.
To close a window, pull up the power window switch.
Driver’s window switch
T32A130827-A3DBA208-DFC4-49E6-92A1-F83F1136BDC1
SIC4522
The driver’s switch, the main switch, can control all
windows.
HORN WINDOWS
Condition: 'Except for China'/
(107,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Locking passenger’s windows:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
When the lock button
*
A
is pushed in, the
passenger’s windows cannot be operated.
To cancel the passenger’s windows lock, push the lock
button
*
A
again.
Passenger’s window switch (if equipped)
T32A130827-1E760836-570A-4B73-80E9-9AEA15B33E1E
SIC4523
The passenger’s switch can control its corresponding
window.
When the passenger’s windows lock button on the
driver’s switch is pushed in, the passenger’s switch
cannot be operated.
Automatic function
T32A130827-D7ACC763-0E96-4CE0-BE1C-FF34F4B3CC4F
SIC4524
The automatic function is available for the switch that
has an
mark on its surface.
The automatic function enables a window to fully open
or close without holding the switch down or up.
To fully open the window, push the power window
switch down to the second detent and release the
switch. To fully close the window, pull the power
window switch up to the second detent and release
the switch. The switch does not have to be held during
window operation.
To stop the window open/close operation during the
automatic function, push down or pull up the switch in
opposite directions.
Auto-reverse function:
GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0
WARNING:
There is a small distance just before the closed
position which cannot be detected. Make sure
that all passengers have their hands, etc. inside
the vehicle before closing the windows.
The auto-reverse function enabl es a window to
automatically reverse when something is caught in
the window as it is closing by the automatic function.
When the control unit detects an obstacle, the window
will be lowered immediately.
Depending on the environment or driving conditions,
the auto-reverse function may activate if an impact or
load similar to something being caught in the window
occurs.
If the window does not close automatically
GUID-1AF95C11-1513-41B2-A58D-44F35B4E3E28
If the power window automatic function (closing only)
does not operate prope rly, perform the following
procedure to initialize the power window system.
1. Place the ignition switch in the “ON” position.
2. Close the door.
3. Open the window completely by operating the
power window switch.
4. Pull the power window switch and hold it to close
the window, and then hold the switch more than 3
seconds after the window is closed completely.
5. Release the power window switch. Operate the
window by the automatic function to confirm the
initialization is complete.
If the power window automatic function does not
operate properly after performing the procedure above,
have your vehicle checked by a NISSAN dealer.
Instruments and controls 2-51
Condition: 'Except for China'/
(108,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-52 Instruments and controls
T32A130827-255751BE-9F3B-4399-82F0-649C72C79EED
WARNING:
. In an accident you could be thrown from the
vehicle through an open sunroof. Adults
should always use seat belts and children
should always use seat belts or child
restraint systems.
. Never allow anyone to stand up or extend
any portion of their body out of the opening
while the vehicle is in motion or while the
sunroof is closing.
CAUTION:
. Remove water drops, snow, ice or sand from
the sunroof before opening.
. Do not place any heavy objects on the
sunroof or surrounding area.
. Do not push or pull on the sunshade. Doing
so can damage the sunshade.
AUTOMATIC SUNROOF AND SUNSHADE
T32A130827-28C0DFAA-B69D-4E45-82DC-019C40E6370A
JVI0950X
Sliding sunshade and sunroof
GUID-3EABCCAB-C6E2-4608-B00E-88B3FD6F5D58
When the sunroof switch is pushed to the OPEN
position
*
1
, the sunshade open fully. When a switch
is pushed again, the sunroof opens to the comfort
mode position. When the switch is pushed again, the
sunroof opens fully.
When the sunroof switch is pushed to the CLOSE
position
*
2
, the sunroof will automatically close. Push
the switch again, and the sunshade will close.
When the sunroof switch is pushed to the OPEN
position
*
3
to the second detent, the sunshade opens
fully, and the sunroof opens to the comfort mode
position. When the switch is pushed again, the sunroof
opens fully. When the sunroof switch is pushed to the
CLOSE position
*
4
to the second detent, both the
sunshade and sunroof close.
To stop the sunshade or sunroof during the operation,
push the sunroof switch to either of the OPEN
*
1
,
CLOSE
*
2
or UP
*
5
position.
Tilting sunroof
T32A130827-B52774CA-83BE-4410-B6C8-8F375B547A03
To tilt up the sunroof, push the sunroof switch to the up
position
*
5
.
To tilt down the sunroof, push the switch to the up
position
*
5
or push the switch to the CLOSE position
*
2
.
When the sunroof is tilted up, push the switch to the
CLOSE position to the second detent
*
4
. The
sunroof will tilt down and the sunshade will close.
Comfort mode
GUID-462586CE-C679-40B7-A1D8-074595F41556
This is the position used when driving with the sunroof
open. When driving with the sunroof fully open, wind
noise may be very loud. Use the comfort mode position
when driving.
Auto-reverse function
T32A130827-15606ABF-507F-434E-8847-2826E35ADDB9
WARNING:
There are some small distances just before the
closed position which cannot be detected. Make
sure that all passengers have their hands, etc.
inside the vehicle before closing the sunroof and
sunshade.
The auto-reverse function enables the sunroof and
sunshade to automatically reverse when something is
caught in the sunroof and sunshade as it is closing.
When the control unit detects an obstacle, the sunroof
and sunshade will open immediately.
Depending on the environment or driving conditions,
the auto-reverse function may activate if an impact or
load similar to something being caught in the sunroof
and sunshade occurs.
If the auto-reverse function activates consecutively or
the battery is discharged, the sunroof and sunshade
may not close properly. In this case, push and hold the
switch to the CLOSE position
*
2
to close the
sunroof.
SUNROOF (if equipped)
Condition: 'Except for China'/
(109,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
If sunroof does not operate
T32A130827-574BB114-4461-4515-9FA9-BE01BF521E86
If the sunroof and sunshade do not operate properly,
perform the following procedure to initialize the
operation system.
1. If the sunroof and sunshade are open, close them
fully by repeatedly pushing the sunroof switch to
the CLOSE
*
2
position.
2. Push and hold the sunroof switch to the CLOSE
*
2
position for 10 seconds.
3. After the sunroof and sunshade move slightly to
the closed position and then move back a little,
release the sunroof switch.
4. Push and hold the sunroof switch to the CLOSE
*
2
position for over 6 seconds.
5. Release the sunroof switch. The sunroof and
sunshade will fully open and then fully close.
6. Check if the sunroof switch operates normally.
If the sunroof does not operate properly after perform-
ing the procedure above, have your vehicle checked by
a NISSAN dealer.
T32A130827-F2AA6CF4-E731-425F-BB87-88912AD9655F
JVI0878X
Instrument panel (if equipped)
JVI0880X
Console box
JVI0879X
Cargo area
To use the power outlet, pull the cover as illustrated.
CAUTION:
. The outlet and plug may be hot during or
immediately after use.
. This power outlet is not designed for use
with a cigarette lighter unit.
. Do not use with accessories that exceed a 12
volt, 120W (10A) power draw. Do not use
double adapters or more than one electrical
accessory.
. Use this power outlet with the engi ne
running to avoid discharging the vehicle
battery.
. Avoid using when the air conditioner, head-
lights or rear window defogger is on.
. Push the plug in as far as it will go. If good
contact is not made, the plug may overheat
or the internal temperature fuse may blow.
. Before inserting or disconnecting a plug, be
sure that the electrical accessory being used
is turned OFF.
. When not in use, be sure to close the cap. Do
not allow water or any liquid to contact the
outlet.
Instruments and controls 2-53
POWER OUTLETS
Condition: 'Except for China'/
(110,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-54 Instruments and controls
T32A130827-B24CD5FC-9602-4806-9DA0-5FFC53CB1C5A
ASHTRAY
T32A130827-E85C890E-52D5-4314-A558-690B80232684
JVI0982X
WARNING:
Do not use the ashtray in any other position than
the front side of the front center cup holder.
CAUTION:
When using the cooling function, close the cup
holder ventilator or take care to prevent the ash
from being dropped in the cup holder due to the
airflow coming from the drink holder ventilator.
To open the ashtray, pull up the lid
*
1
.
To take out the ashtray, pull out
*
2
.
CIGARETTE LIGHTER
T32A130827-8CF69FA1-D794-492C-84CA-B620E0B87812
JVI0983X
WARNING:
The cigarette lighter should not be used while
driving so that full attention may be given to
vehicle operation.
The cigarette lighter operates when the ignition switch
is in the “ACC” or “ON” position.
To heat the cigarette lighter, push in until it latches.
Wh en the lighter is heated, it will spring out
automatically.
Return the cigarette lighter to its original position after
use.
T32A130827-4F70AA92-E111-49F9-9148-6C6F9DBC2959
WARNING:
. The storage s should n ot be used while
driving so that the full attention may be
given to vehicle operation.
. Keep the storage lids closed while driving to
help prevent injury in an accident or sudden
stop.
GLOVE BOX
T32A130827-2FDFCE7B-8209-4AC2-914D-3DB6520713C3
JVI0888X
Type A
Open the glove box by pulling the handle.
JVI0979X
Type B
Open the glove box by pulling the handle. Use the
ASHTRAYS AND CIGARETTE
LIGHTER (if equipped)
STORAGES
Condition: 'Except for China'/
(111,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
mechanical key when locking
*
1
or unlocking
*
2
the
glove box.
CONSOLE BOX
T32A130827-E5DC7225-ADF3-4BD7-84C0-16C5F74E5DB5
JVI0877X
To open the console box lid, push up the knob
*
A
and
pull up the lid.
To close, push the lid down until the lock latches.
SUNGLASSES HOLDER
T32A130827-37199B74-7357-42DF-B0FC-A0BB5ABB799E
JVI0619X
WARNING:
Keep the sunglasses holder closed while driving
to prevent an accident.
CAUTION:
. Do not use for anything other than sun-
glasses.
. Do not leave sunglasses in the sunglasses
holder while parking in direct sunlight. The
heat may damage the sunglasses.
To open the sunglasses holder, push and release. Only
store one pair of sunglasses in the holder.
CUP HOLDERS
T32A130827-2EAEA041-FDC2-4449-A0DF-86F5F3C62E98
WARNING:
The driver must not remove or insert cups into
the cup holder while driving so that full attention
may be given to vehicle operation.
CAUTION:
Avoid abrupt starting and braking especially
when the cup holder is being used to prevent
spilling the contents. If the contents are hot, they
could scald you or your passengers.
Front
T32A130827-44543370-D57D-4D3F-9536-7CC6E2DC91E3
JVI0872X
Front side
To keep a drink cold or warm,
1. Place the drink in the cup holder.
2. Choose the “
” or “ ” mode by operating
the heater or air conditioner.
3. Open the cup holder ventilator by pulling the knob
up
*
1
.
. The airflow coming from the drink holder ventilator
is the same temperature as the air conditioner. The
temperature cannot be set independently.
. When the heater or the air conditioner is working
in high temperature, the cooling function will not
work even if the cup holder ventilator is opened.
When the cooling or warming function is not neces-
sary, close the cup holder ventilator by pushing the
knob down
*
2
.
Instruments and controls 2-55
Condition: 'Except for China'/
(112,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-56 Instruments and controls
Second row seat
GUID-323C94F4-2097-494A-953F-2C712117C522
JVI0874X
The second row seat cup holders are located in the
rear fold-down armrest.
SOFT BOTTLE HOLDERS
GUID-A4B479DB-6620-4273-B87A-4554813BEA6B
CAUTION:
. Do no t use bottle holder for any other
objects that could be thrown about in the
vehicle and possibly injure people during
sudden braking or an accident.
. Do not use bottle holder for open liquid
containers.
Front and second row seat
GUID-8F3C4B45-88F5-415E-A965-D8D2AEF9A727
JVI0884X
The front and second row seat soft bottle holders are
located on the doors.
Third row seat (if equipped)
GUID-32712856-C3DD-4DF2-9CD4-06D74D52EC95
JVI0875X
CARD HOLDER
GUID-F531A303-4AC5-46FE-9483-EC6CA3692D3D
JVI0952X
Type A
Slide a card in the card holder
*
A
.
SIC4348
Type B
Slide the card in the card holder.
Condition: 'Except for China'/
(113,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
LUGGAGE HOOKS
T32A130827-021F3971-098A-4CA2-A236-CC812C812378
JVI0871X
Luggage room
WARNING:
. Always make sure that the luggage is
properly secured. Use the suitable ropes
and hooks.
. Unsecured luggage can become dangerous
in an accident or sudden stop.
. Do not apply a total load of more than 10 kg
(22 lb) to a single hook.
LUGGAGE COMPARTMENT
GUID-558BA12C-4291-44EE-A683-5E038ED8E416
You can use the luggage compartment in diverse ways
using the flexible luggage board.
WARNING:
Do not put objects heavier than 75 kg (165 lbs)
on the load floor while in the mid position. In the
upper position, objects heavier than 20 kg (10
lbs) should not be placed on the load floor.
CAUTION:
. Do not push the front edge of the luggage
board f orcibly. Doing so may cause th e
luggage boar d to be tilted , resulting in
personal injury.
. Do not handle the luggage board forcibly as
this may deform it.
. While in the upper position, do not recline
the seatbacks.
. Do not place cargo higher than the seat-
backs. In a sudden stop or collision, un-
secured cargo could cause personal injury.
NOTE:
The diversity of the luggage compartment may
be restricted depending on the equipment of
each vehicle.
Instruments and controls 2-57
Condition: 'Except for China'/
(114,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-58 Instruments and controls
Three-stage mode
GUID-C1024F24-FDC0-49C3-99C5-28A15DAE921F
JVI0941X
1. Pull the outer board upward to about 308.
2. Pull the outer board toward the rear of the vehicle
and then push it into the bottom of the luggage
under space.
3. Pull the inner board upward until it stops at
position
*
A
.
4. Pull off the inner board toward the rear of the
vehicle from
*
B
.
5. Push the inner board into
*
C
.
Vertical mode
GUID-21594E4F-BE7F-42EE-B319-2E84E0B63320
JVI0942X
1. Pull the outer board upward to 908.
2. Push down the board until it stops.
Condition: 'Except for China'/
(115,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
Separation mode
GUID-D8B0EBE7-C574-4C93-B410-F23DDB5948AA
JVI0943X
1. Place the inner board on the upper position. (See
“Three-stage mode” (P.2-58).)
2. Pull the inner board upward about 10 cm (4 in)
and pull up the outer board to 908.
3. Push down the board until it stops.
Luggage under space (if equipped)
GUID-21AD97B2-865B-4777-A3BA-4933A3D3ACAE
JVI0944X
Two row model
To use the luggage under space, pull off the outer
board.
JVI0945X
Three row model
To use the luggage under space, pull off the board.
COAT HOOK
T32A130827-A5109DD8-D3FB-4704-A791-FE7CC4BD6426
SIC3505
The coat hook is located above the rear side window
(on the driver’s side).
CAUTION:
Do not apply a total load of more than 1 kg (2 lb)
to the hook.
Instruments and controls 2-59
Condition: 'Except for China'/
(116,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-60 Instruments and controls
TONNEAU COVER (if equipped)
T32A130827-B65E2369-D26A-4207-9A36-6345D29FE264
JVI0955X
The tonneau cover keeps the luggage compartment
contents hidden from the outside.
To use the tonneau cover, open the flap
*
1
, pull it out
*
2
and insert both sides to the guide
*
3
.
To remove the tonneau cover, stow the cover and pull
the holder
*
4
.
WARNING:
. Never put anything on the tonneau cover, no
matter how small. Any object on it could
cause an injury in an accident or sudden
stop.
. Do not leave the tonneau cover in the vehicle
with it disengaged from the holder.
. The child restraint top tether strap may be
damaged by contact with the tonneau cover
or items in the luggage area. Remove the
tonneau cover from the vehicle or secure it
in the luggage area. Also secure any items in
the luggage area. Your child c ould be
seriously injured or killed in a collision if
the top tether strap is damaged.
T32A130827-C6B2180B-8BDB-4771-B0A2-5D1F084D16D7
JVI0889X
Luggage can be carried on the roof by securing
crossbars to the roof rail. Follow all crossbar manu-
facturers instructions for installing and use of the
crossbars. The roof rail is designed to carry loads
(luggage plus crossbars) below 100 kg (221 lb).
Overloading may cause damage to the vehicle.
CAUTION:
. Do not put or hang anything on or around
side pipes or plastic covers.
. For crossbar installation on a roof rail with
driving lights, contact a NISSAN dealer.
ROOF RAIL (if equipped)
Condition: 'Except for China'/
(117,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
GUID-3A707557-215D-4435-816A-CAEBAE3D6B85
TYPE A
GUID-1A4190FA-335D-4132-BF45-5F3C0E0E464A
SIC2872
1. To block out glare from the front, swing down the
sun visor
*
1
.
2. To block glare from the side, remove the sun visor
from the center mount and swing it to the side
*
2
.
TYPE B
GUID-0C64574F-7EB9-4848-A9B8-7FD2189D156D
SIC3739
1. To block glare from the front, swing down the main
sun visor
*
1
.
2. To block glare from the side, remove the main sun
visor from the center mount and swing it to the
side
*
2
.
3. Slide the sun visor
*
3
in or out as needed.
Instruments and controls 2-61
SUN VISORS
Condition: 'Except for China'/
(118,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-62 Instruments and controls
T32A130827-5C15C98D-642F-4C71-AF7E-6F66116BDA94
CAUTION:
. Do not leave the light switch on when the
engine is not running for extended periods
of time to prevent the battery from being
discharged.
. Turn of f the lights when you leave the
vehicle.
INTERIOR LIGHT SWITCH
GUID-33588F23-81BB-4ED3-B174-2DED4A67B768
JVI0626X
*
1
The interior light can be turned ON regardless of
door position. The light will go off after a period
of time unless the ignition switch is placed in the
“ON” position when any door is opened.
*
2
The interior lights can be set to operate when
the doors are opened. To turn off the interior
lights when a door open, push the switch, the
interior lights will not illuminate, regardless of
door position. The lights will go off when the
ignition switch is placed in the “ON” position, or
the driver’s door is closed and locked. The lights
will also go off after a period of time when the
doors are open.
CONSOLE LIGHT
GUID-3318167A-8EF4-47AF-94BE-3AB215FDD69E
JVI0627X
The console light will turn on whenever the clearance
lights or headlights are illuminated.
MAP LIGHTS
GUID-BC9C460F-9745-4A52-9DAA-D514D2C8FB52
JVI0628X
Push the button to turn the map lights on. To turn them
off, push the button again.
ROOM LIGHT (if equipped)
GUID-4A1897F6-1FD4-45F4-94D1-2917001B299E
SIC2063A
The room light has a three-position switch.
When the switch is in the “ON” position
*
1
, the room
light illuminates.
When the switch is in the “DOOR” position
*
2
, the
room light illuminates when a door is opened.
The interior light timer will keep the room light on for
approximately 15 seconds when:
. The key is removed from the ignition switch with
the driver’s door closed. (model without Intelligent
Key system)
. The ignition switch is placed in the “OFF” position.
(model with Intelligent Key system)
. The doors are unlocked by pushing the “UN-
LOCK”
button (on the remote controller or
Intelligent Key) or the request switch (Intelligent
Key system equipped models), with the ignition
switch in the “LOCK” position.
. Any door is opened and then closed with the
ignition switch in the “LOCK” position.
The interior light timer will be cancelled when:
. The driver’s door is locked.
INTERIOR LIGHTS
Condition: 'Except for China'/
(119,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
. The ignition switch is placed in the “ON” position.
When the switch is in the “OFF” position
*
3
, the room
light does not illuminate, regardless of any condition.
REAR PERSONAL LIGHTS (if equipped)
T32A130827-E33A0418-71E4-4783-8776-95BDD8E0633C
SIC3250
To turn the rear personal lights on, push the switch. To
turn them off, push the switch again.
VANITY MIRROR LIGHT
T32A130827-60D8B568-1434-44D8-97EC-1FD013843CF8
SIC3869
To access the vanity mirror, pull the sun visor down and
flip open the mirror cover.
The vanity mirror light illuminates when the vanity mirror
cover is opened. When the cover is closed, the light
will turn off.
LUGGAGE ROOM LIGHT
T32A130827-B967DCD8-A40C-4BBC-9740-0F3A54FAB83F
The luggage room light illuminates when the back door
is opened. When the back door is closed, the light will
turn off.
BATTERY SAVER SYSTEM
T32A130827-2EE0927A-B246-4DC2-A9F2-1E86EFF57FE0
When the interior light stays on, it will auto-
matically turn off after a period of time when the
ignition switch has been placed in the “OFF”
position. To turn on the light again, place the
ignition switch in the “ON” position.
The interior light will automatically turn off within a
period of time after the latest operation of the following
with the ignition switch in the “OFF” position:
. Opening or closing any door
. Locking or unlocking with a key, the power door
lock switch, or using the Intelligent Key system
. Pushing the ignition switch
The light will turn on again when any of the above
operations is performed after the light has turned off
automatically.
GUID-D1681C6A-CB33-46B3-BDB8-12E1079EFE21
The HomeLi nk
®
Universal Transceiver provides a
convenient way to consolidate the functions of up to
three individual hand-held transmitters into one built-in
device.
HomeLink
®
Universal Transceiver:
. Will operate most Radio Frequency (RF) devices
such as garage doors, gates, home and office
lighting, entry door locks and security systems.
. Is powered by your vehicle’s battery. No separate
batteries are required. If the vehicle’s battery is
discharged or is disconnected, HomeLink
®
will
retain all programming.
When the HomeLink
®
Universal Transceiver is
programmed, retain the original transmitter for
future programming procedures (Example: new
vehicle purchases). Upon sale of the vehicle, the
programmed HomeLink
®
Universal Transceiver
buttons should be erased for security purposes.
For additional information, refer to “Program-
ming HomeLink
®
” (P.2-64).
WARNING:
. During the programming procedure your
garage door or security gate will open and
close (if the transmitter is within range).
Make sure that people or objects are clear of
the garage door, gate, etc. that you are
programming.
. Your vehicle’s engine should be turned off
while programming the HomeLink
®
Univer-
sal Transceiver. Do not breathe exhaust
gases; they contain colorless and odorless
carbon monoxide. Carbon monoxide is dan-
gerous. It can cause unconsciousness or
death.
Instruments and controls 2-63
HomeLink
®
UNIVERSAL
TRANSCEIVER (if equipped)
Condition: 'Except for China'/
(120,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-64 Instruments and controls
PROGRAMMING HomeLink
®
GUID-0B22A911-974D-4638-8D21-BC973EB880FA
If you have any questions or are having difficulty
programming your HomeLink
®
buttons, refer to the
HomeLink
®
web site at: www..
NOTE:
It is also recommended that a new battery be
placed in the hand-held transmitter of the device
being programmed to HomeLink
®
for quicker
programming and accurate transmission of the
radio-frequency.
1. Position the end of your hand-held transmitter 26 -
76 mm (1 - 3 in) away from the HomeLink
®
surface, keeping the HomeLink
®
indicator light
*
1
in view.
JVI0428X
2. Using both hands, simultaneously press and hold
the desired HomeLink
®
butt on and handheld
transmitter button. DO NOT release until the
HomeLink
®
indicator light
*
1
flashes slowly and
then rapidly. When the indicator light flashes
rapidly, both buttons may be released. (The rapid
flashing indicates successful programming.)
JVI0429X
3. Pres s and hold the programmed HomeLink
®
button and observe the indicator light.
.
If the indicator light
*
1
is solid/continuous,
programming is complete and your device
should activate when the HomeLink
®
button
is pressed and released.
.
If the indicator light
*
1
blinks rapidly for two
seconds and then turns to a solid/continuous
light, continue with Steps 4-6 for a rolling code
device. A second person may make the
following steps easier. Use a ladder or other
device. Do not stand on your vehicle to perform
the next steps.
4. At the receiver located on the garage door opener
motor in the garage, locate the “learn” or “smart”
button (the name and color of the button may vary
by manufacturer but it is usually located near
where the hanging antenna wire is attached to the
unit). If there is difficulty locating the button,
reference the garage door opener’s manual.
5. Press and release the “learn” or “smart” button.
NOTE:
O nce th e butt on is pressed, you have
approximate ly 30 seconds to i nitiate the
next step.
6. Return to the vehicle and firmly press and hold the
programmed HomeLink
®
button for two seconds
and release. Repeat the “press /hold/release”
sequence up to 3 times to complete the program-
ming process. HomeLink
®
should now activate
your rolling code equipped device.
7. If you have any questions or are having difficulty
programming your HomeLink
®
buttons, refer to the
HomeLink
®
web site at: www..
OPERATING THE HomeLink
®
UNIVERSAL
TRANSCEIVER
GUID-68441759-7704-47A0-BE37-19F4DFFABB83
The Ho meLink
®
Universal Transceiver, afte r it is
programmed, can be used to activate the programmed
device. To operate, simply press and release the
appropriate programmed HomeLink
®
Universal Trans-
ceiver button. The amber indicator light will illuminate
while the signal is being transmitted.
For convenience, the hand-held transmitter of the
device may also be used at any time.
PROGRAMMING TROUBLESHOOTING
GUID-A6AD2DFC-C4A4-4F60-AE87-75B4679FD409
If the HomeLink
®
does not quickly learn the hand-held
transmitter information:
. replace the hand-held transmitter batteries with
new batteries.
. position the hand-held transmitter with its battery
area facing away from the HomeLink
®
surface.
. press and hold both the HomeLink
®
and hand-
held transmitter buttons without interruption.
. position the hand-held transmitter 26 to 76 mm (1
to 3 in) away from the HomeLink
®
surface. Hold
Condition: 'Except for China'/
(121,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
the transmitter in that position for up to 15
seconds. If HomeLink
®
is not programmed within
that time, try holding the transmitter in another
position - keeping the indicator light in view at all
times.
If you have any questions or are having difficulty
programming your HomeLink
®
buttons, refer to the
HomeLink
®
web site at: www..
CLEARING THE PROGRAMMED INFOR-
MATION
GUID-08D972A2-A208-4044-ACAD-8B01836AC192
Th e following procedure clears the progra mmed
information f rom both buttons. Individual buttons
cannot be cleared. However, individual buttons can
be reprogrammed, see “Reprogramming a single
HomeLink
®
button” (P.2-65).
To clear all programming
GUID-3AEA6B1C-6970-4F3D-9E19-D2B4279D6E00
1. Press and hold the two outer HomeLink
®
buttons
until the indicator light begins to flash in approxi-
mately 10 seconds. Do not hold for longer than 20
seconds.
2. Release both buttons.
HomeLink
®
is now in the programming mode and can
be programmed at any time beginning with “Program-
ming HomeLink
®
” - Step 1.
REPROGRAMMING A SINGLE HomeLink
®
BUTTON
GUID-F98BB3C6-C31D-4655-A19F-8D5E8137BA0B
To reprogram a HomeLink
®
Universal Transceiver
button, complete the following.
1. Press and hold the desired HomeLink
®
button. Do
not release the button.
2. The indicator light will begin to flash after 20
seconds. Without releasing the HomeLink
®
but-
ton, proceed with “Programming HomeLink
®
” -
Step 1.
For questions or comments, contact HomeLink
®
at:
The HomeLink
®
Universal Transceiver button has now
been reprogrammed. The new device can be activated
by pushing the HomeLink
®
button that was just
programmed. This procedure will not affect any other
programmed HomeLink
®
buttons.
IF YOUR VEHICLE IS STOLEN
GUID-E0EEA60A-412E-4342-A1A7-F725E8A1D589
If your vehicle is stolen, you should change the codes
of any non-rolling code device that has been pro-
grammed into HomeLink
®
. Consult the Owner’s
Manual of each device or call the manufacturer or
dealer of those devices for additional information.
When your vehicle is recovered, you will need to
reprogram the HomeLink
®
Universal Transceiver
with your new transmitter information.
Instruments and controls 2-65
Condition: 'Except for China'/
(122,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-66 Instruments and controls
MEMO
Condition: 'Except for China'/

Related Topics

Cockpit Instrument panel Meters and gauges Compass (if equipped) Warning/indicator lights and audible reminders Vehicle information display Headlight and turn signal switch Fog light switch Wiper and washer switch Defogger switch Horn Windows Sunroof (if equipped) Power outlets Ashtrays and cigarette lighter (if equipped) Storages Luggage compartment Coat hook Tonneau cover (if equipped) Roof rail (if equipped) Sun visors Interior lights HomeLink? Universal Transceiver (if equipped)

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot