2007-2012 Nissan X Trail SUV Instruments and controls -> Compass (if equipped) User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Instruments and controls -> Compass (if equipped) for Your Nissan X Trail SUV Second Generation (2007-2012)

(66,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
2-10 Instruments and controls
INSTRUMENT BRIGHTNESS CONTROL
T32A130827-4B4E1BB1-064B-41FF-BF73-F1A599D4FFD2
JVI0644X
JVI0661M
The instrument brightness control switch can be
operated when the ignition switch is in the “ON”
position. When the switch is operated, the vehicle
information display switches to the brightness adjust-
ment mode.
Push the + side of the switch
*
A
to brighten the
meter panel lights and inst r u m e nt panel l i g hts (if
equipped). The bar
*
1
moves to the + side.
Push the - side of the switch
*
B
to dim the lights. The
bar
*
1
moves to the − side.
The vehicle information display returns to the normal
display when the instrument brightness control switch
is not operated for more than 5 seconds.
CONTINUOUSLY VARIABLE TRANSMIS-
SION (CVT) POSITION INDICATOR (if
equipped)
T32A130827-70DD4510-E19D-4AF8-8367-56D79B1EA242
The Continuously Variable Transmission (CVT) position
indicator indicates the shift lever position when the
ignition switch is in the “ON” position.
GUID-9D19DCDD-D820-4733-B7B5-DF99D34E8259
SIC3181
When the ignition switch is placed in the “ON”
position, the compass display
*
B
will indicate the
direction the vehicle is heading.
NOS1741
If the display reads “C”, calibrate the compass by
driving the vehicle in 3 complete circles at less than 8
km/h (5 MPH). You can also calibrate the compass by
driving your vehicle on your everyday route. The
compass will be calibrated once it has tracked 3
complete circles.
To turn on and off the compass manually, push the
switch
*
A
while the ignition switch is in the “ON”
position.
COMPASS (if equipped)
Condition: 'Except for China'/
(67,1)
[ Edit: 2014/ 11/ 7 Model: T32-A ]
ZONE VARIATION CHANGE PROCEDURE
GUID-30DDF5A7-BDA3-4F35-A83F-CA7319278C24
SIC2934
Zone map
The difference between magnetic north and geogra-
phical north is known as variance. In some areas, this
difference can sometimes be great enough to cause
false compass readings. Follow these instructions to
set the variance for your particular location if this
happens:
1. Push the
switch for more than 3 seconds.
The current zone number will appear in the display.
2. Find your current location and vari ance one
number on the zone map.
3. Push the
switch repeatedly until the new
zone number appears in the display. After you stop
pushing the switch in, the display will show a
compass direction within a few seconds.
. If the compass deviates from the correct indication
soon after repeated adjustment, have the com-
pass checked at a NISSAN dealer.
. The compass may not indicate the correct
compass point in tunnels or while driving up or
down a steep hill. (The compass returns to the
correct compass point when the vehicle moves to
an area where the geomagnetism is stabilized.)
CAUTION:
. Do not install a ski rack, antenna, etc. which
are attached to the vehicle by means of a
magnet. They affect the operation of the
compass.
. When cleaning the mirror, use a paper towel
or similar material dampened with glas s
cleaner. Do not spray glass cleaner directly
on the mirror as it may cause the liquid
cleaner to enter the mirror housing.
Instruments and controls 2-11
Condition: 'Except for China'/

Related Topics

Popular Owner Manuals