Get Instruments and controls -> Vehicle information display Guide for Nissan X Trail SUV Second Generation (2007-2012)

(76,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

2-20 Instruments and controls

Stop/Start System or Idling Stop System

reminder buzzer (if equipped)

GUID-69B36B73-5D2B-4FF6-93AE-B76254D6E0C7

The engine will shift to the normal stopped state if any

of the following operations is made during Stop/Start

System or Idling Stop System activation, and the Stop/

Start System or Idling Stop System buzzer will sound

if:

. The driver’s seat belt is unfastened and the

driver’s door is open (MT models).

. The vehicle engine hood is open.

Close the hood or the driver’s door, or fasten the seat

belt then restart the engine using the ignition switch.

For more information, see “Stop/Start System or Idling

Stop System” (P.5-18).

T32A130827-3610D9C5-CE18-4747-932A-3E708FB2DA5B

JVI0641X

The vehicle information display

is located between

the tachometer and the speedometer. It displays such

items as:

. Vehicle settings

. Trip computer information

. Driver Assistance (if equipped)

. Speed limiter information (if equipped)

. Cruise control system information (if equipped)

. Intelligent Key operation information (if equipped)

. Audio information (if equipped)

. Navigation - turn by turn (if equipped)

. Indicators and warnings

. Tyre pressure information (if equipped)

. Chassis Control

. Other information

Please note that the information used in this manual is

written in UK English. There are a few differences in

the information for the UK and U.S. English versions of

the system.

For language settings, see “Language” (P.2-26).

HOW TO USE THE VEHICLE INFORMA-

TION DISPLAY

GUID-70381C67-CDDB-4575-A232-0CA687BCF4A0

Type A:

JVI0887X

The vehicle information display can be changed using

the switches

and ENTER

located on the

steering wheel.

- navigate through the items in vehicle

information display

- select/enter the Vehicle information menu

items or to change from one display screen to

the next (i.e. trip, Fuel economy)

ENTER - change or select an item in the vehicle

information display

- go back to the previous menu

VEHICLE INFORMATION DISPLAY

Condition: 'Except for China'/

(77,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

Type B:

JVI0886X

The vehicle information display can be changed using

the switches

and ENTER

located on the

steering wheel.

- navigate through the items in vehicle

information display

ENTER - change or select an item in the vehicle

information display

- select/enter the Vehicle information menu

items or to change from one display screen to

the next (i.e. trip, Fuel economy)

- go back to the previous menu

The

switch

also controls audio and control

panel functions. For additional information, see “Steer-

ing wheel mounted controls for audio (Type B)” (P.4-

76).

STARTUP DISPLAY

GUID-E828D244-7332-4BBD-A2FA-0762846370C8

When the igni tion switch is placed in th e “ON”

positi on, the screens that display in the vehicle

information display include:

. Trip computer

. Fuel economy

. Warnings

Warnings will only display if there are any present, for

more information on warnings and indicators, see

“Vehicle information display warnings and indicators”

(P.2-28).

To control what items display in the vehicle information

display, see “Settings” (P.2-21).

SETTINGS

GUID-2255583B-12E6-48CF-ACE1-EFD05B4B73DC

The setting mode allows you to change the information

displayed in the vehicle information display:

. Driver Assistance (if equipped)

. Clock

. Display Settings

. Vehicle Settings

. Maintenance

. Alert

. Tyre Pressures (if equipped)

. Units

. Language (if equipped)

. Factory Reset

Driver Assistance (if equipped)

GUID-27D6F794-B48A-453D-AF57-C93B0459653E

To change the status, warnings or turn on or off any of

the systems/warnings displayed in the “Driver Assis-

tance” menu, use the

switch

to select and the

ENTER

to change a menu item:

. Driving Aids

. Driver Attention

. Traffic Sign

. Parking Aids

. Chassis Control

Driving Aids:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To change the status, warnings or turn on or off any of

the systems/warnings displayed in the “Driving Aids”

menu, use the

switch

to select and the

ENTER

to change a menu item:

. Lane

— Lane Departure Warning (LDW) ON/OFF

. Blind Spot

— Blind Spot Warning (BSW) ON/OFF

. Emergency Brake

— Emergency Brake ON/OFF

Driver Attention:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Driver Attention ON/OFF

Traffic Sign:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Traffic Sign ON/OFF

Parking Aids:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To change the status or turn on or off any of the

systems displayed in the “Parking Aids” menu, use the

switch

to select and the ENTER

change a menu item:

Instruments and controls 2-21

Condition: 'Except for China'/

(78,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

2-22 Instruments and controls

. Moving Object

— Moving Object Detection (MOD) ON/OFF

. Front Sensor

— Front parking sensor ON/OFF

. Rear Sensor

— Rear parking sensor ON/OFF

. Display

— Parking sensor display ON/OFF

. Volume

— Parking sensor buzzer volume Low/Med./High

. Range

— Parking sensor detection range Far/Mid./Near

For additional information, see “Around view monitor”

(P.4-10).

Chassis Control:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To change the status, warnings or turn on or off any of

the systems/warnings displayed in the “Chassis

Control” menu, use the

switch

to select

and the ENTER

to change a menu item:

. Trace Control

— See “Active Trace Control” (P.5-28) for more

information.

. Engine Brake (if equipped)

— See “Active Engine Brake (Continuously Vari-

able Transmission (CVT) models)” (P.5-28) for

more information.

Clock

GUID-5AF46434-3038-4E05-B84D-77316DA0684E

To set the cloc k, see “Clock” (P.4-6) or “Audio

settings” (P.4-58) in this manual or the separate

Navigation Owner’s Manual.

Display Settings

GUID-72E39564-A9E2-43D0-9D53-676FFB0D1A09

The meter settings allows the customer to choose from

the various meter selections.

The meter settings can be changed using the

and the ENTER

buttons.

Contents Selection:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The items that display when the ignition switch is

placed in the “ON” position can be enabled/disabled.

To change the items that are displayed, use the

to scroll and the ENTER

to select a menu item.

Body Colour:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The color of the vehicle that displays in the vehicle

information display when the ignition switch is placed

in the “ON” position can be changed.

1. Use the

switch

until “Body Colour” is

selected, and press ENTER

2. Select the body color using the

switch

and press ENTER

ECO Mode Settings (if equipped):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

This setting allows the customer to change the ECO

mode system settings.

Use the

switch

until “ECO Mode Settings” is

selected, and press ENTER

ECO Glow:

This setting allows the customer to enable/disable the

ambient ECO indicator in the vehicle inf ormation

display.

1. Use the

switch

to select “ECO Glow”.

2. Pres s the ENTER

to turn ON/OFF the

ambient ECO in the vehicle information display.

Display:

JVI0665X

This setting allows the customer to enable/disable the

ECO pedal guide function.

1. Use the

switch

to select “Display”.

2. Press the ENTER

to select “Pedal Guide” or

“Fuel econ.”.

For detailed information, see “ECO mode system”

(P.5-47).

Condition: 'Except for China'/

(79,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

Stop/Start (if equipped):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

To change the status, warnings or turn on or off any of

the systems/warnings displayed in the “Stop/Start”

menu, use the

switch

to select and the

ENTER

to change a menu item:

. Display

— Stop/Start display ON/OFF

. Trip CO2 saving

The “Trip CO2 saving” and engine stop time mode

shows the CO2 saving and engine stop time since

the last reset. The CO2 saving and engine stop

time can be reset by pushing the ENTER

(Type A) or

(Type B).

. Total CO2 saving

The “Total CO2 saving” and engine stop time

mode shows:

— The estimated CO2 exhaust emissions pre-

vented.

— The engine stop time that the engine has been

stopped by the “Stop/Start or Idling Stop”

System.

NOTE:

The “Total CO2 saving” and engine stop time

values cannot be reset and show accumu-

lated “ Stop/Start or Idling Stop” System

information since the vehicle was built.

ECO Drive Report (if equipped):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Display:

This setting allows the customer to enable/disable the

ECO Drive Report in the vehicle information display.

1. Use the

switch

to select “ECO Drive

Report”.

2. Press the ENTER

to turn ON/OFF the ECO

management display in the vehicle information

display.

View History:

This setting allows the customer to reset the past

history of the fuel economy and the best fuel economy.

Welcome Effect:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

You can choose whether or not to display the welcome

screen when the ignition switch is placed in the “ACC”

or “ON” position. You can also choose the following

items to define how the welcome screen looks:

. Dial and Pointer

. Display Effect

Select “Welcome Effects” using the

switch

and press the ENTER

to select this menu. Use the

switch

to navigate between the menu options

and press the ENTER

to turn each function ON/

OFF.

Vehicle Settings

GUID-41BC8E41-F48A-4F7F-9C6C-781FDBBDDD1D

The vehicle settings allows the customer to change

settings for the following settings.

. Lighting

. Turn Indicator

. Unlocking

. Wipers

The vehicle settings can be changed using the

, and the ENTER

switches.

Lighting:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The “Lighting” menu has the following options:

. Welcome Light

The welcome lighting can be set to be ON or OFF.

From the “Lighting” menu, select “Welcome

Light”. Use the ENTER

to turn this feature

ON or OFF.

. Int. Lamp Timer

The internal light timer can be set to be ON or

OFF. From the “Lighting” menu, select “Int. Lamp

Timer”. Use the ENTER

to turn this feature ON

or OFF.

. Auto Lights

The sensitivity of the automatic lighting can be

adjusted. From the “Lighting” menu, select “Auto

Lights”. Use the

switch

and the ENTER

to select the required sensitivity. The following

options are available:

— On Earliest

— On Earlier

— Standard

— On Later

. Headlight Off delay (if equipped)

The duration of the automatic headlights can be

changed from 0 to 180 seconds. From the

“Lighting” menu, select “Headlight Off delay”.

Use the ENTER

to change the duration.

Turn Indicator:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The “3 Flash On” overtaking feature can be set to be

ON or OFF. From the “Turn Indicator” menu, select “3

Flash On”. Use the ENTER

to turn this feature ON

or OFF.

Unlocking:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

There are the following options in the “Unlocking”

menu:

. I–Key Door Lock

When this item is turned on, the request switch on

the door is activated. From the “Unlocking” menu,

select “I-Key Door Lock”. Use the ENTER button

to activate or deactivate this function.

Instruments and controls 2-23

Condition: 'Except for China'/

(80,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

2-24 Instruments and controls

. Selective Unlock

When this item is turned on, and the door handle

request switch on the driver’s or front passenger’s

side door is pushed, only the corresponding door

is unlocked. All the doors can be unlocked if the

door handle request switch is pushed again within

1 minute. When this item is turned to off, all the

doors will be unlocked when the door handle

request switch is pushed once. From the “Un-

locking” menu, select “Selective Unlock”. Use the

ENTER button to activ ate or deactivate this

function.

. Answer Bk. Horn (if equipped)

When the answer back horn is on the horn will

chirp and the hazard indicators will flash once

when locking the vehicle with the Intelligent Key or

remote keyless entry function.

Wipers:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

. Speed Dependent (if equipped)

The “Speed Dependent” feature can be activated

or deactivated. From the “Wipers” menu, select

“Speed Dependent”. Use the ENTER

to turn

this feature ON or OFF.

. Rain Sensor (if equipped)

The “Rain sensor” feature can be activated or

deactivated. From the “Wipers” menu, select

“Rain Sensor”. Use the ENTER

to turn this

feature ON or OFF.

. Reverse Link

The “Reverse Link” wiper feature can be set to be

ON or OFF. From the “Wipers” menu, select

“Reverse Link”. Use the ENTER

to turn this

feature ON or OFF.

. Drip Wipe

The “Drip Wipe” feature can be set to be ON or

OFF. From the “Wipers” menu, select “Drip Wipe”.

Use the ENTER

to turn this feature ON or

OFF.

Maintenance

GUID-6417F271-F1CE-47F6-A581-84B3241915F7

JVI0978X

1. Service

2. Filter (if equipped)

3. Tyre

4. Other

The maintenance mode allows you to set alerts for the

reminding of maintenance intervals. To change an item:

Select “Maintenance” using the

switch

and

press ENTER

Service:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

This indicator appears when the customer set distance

comes for changing the engine oil and filter. You can

set or reset the distance for checking or replacing

these items. For scheduled maintenance items and

intervals, see a separate maintenance booklet.

Filter (if equipped):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

This indicator appears when the customer set distance

comes for changing the oil filter. You can set or reset

the distance for checking or replacing these items. For

scheduled maintenance items and intervals, see a

separate maintenance booklet.

Tyre:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

This indicator appears when the customer set distance

comes for replacing tires. You can set or reset the

distance for replacing tires.

WARNING:

The tire replacement indicator is not a substitute

for regular tire checks, including tire pressure

checks. See “Changing tires and wheels” (P.8-

37). Many factors including tire inflation, align-

ment, driving habits and road conditions affect

tire wear and when tires should be replaced.

Sett ing the tire replacement indicator for a

certain driving distance does not mean your

tires will last that long. Use the tire replacement

indicator as a guide only and always perform

regular tire checks. Failure to perform regular

tire checks, including tire pressure checks could

result in tire failure. Serious vehicle damage

could occur and may lead to a collision, which

could result in serious personal injury or death.

Other:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

This indicator appears when the customer set distance

comes for checking or replacing maintenance items

other than the engine oil, oil filter and tires. Other

maintenance items can include such things as air filter

or tire rotation. You can set or reset the distance for

checking or replacing the items.

Condition: 'Except for China'/

(81,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

Alert

GUID-E48629E9-A0E6-4E9A-8778-A498C4B794D4

This setting allows the customer to set alarms.

Select “Alert” using the

switch

and press

ENTER

Outside Temp. (if equipped):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

This setting allows the customer to enable/disable the

alert for outside temperature in the vehicle information

display.

1. Use the

switch

to select “Outside

Temp.”.

2. Press the ENTER

to turn ON/OFF the alert.

Timer:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

This setting allows the customer to set an alert to notify

the driver that the set time has been reached.

1. Use the

switch

to select “Timer”.

2. Press the ENTER

3. To change the timer amount, use the

switch

and the ENTER

to save the selected time

amount.

Navigation (if equipped):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

This setting allows the customer to enable/disable the

alert for navigation in the vehicle information display.

1. Use the

switch

to select “Navigation”.

2. Press the ENTER

to turn ON/OFF the alert.

Phone (if equipped):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

This setting allows the customer to enable/disable the

alert for navigation in the vehicle information display.

1. Use the

switch

to select “Phone”.

2. Press the ENTER

to turn ON/OFF the alert.

Mail (if equipped):

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

This setting allows the customer to enable/disable the

alert for navigation in the vehicle information display.

1. Use the

switch

to select “Mail”.

2. Press the ENTER

to turn ON/OFF the alert.

Tyre pressures (if equipped)

GUID-957EC358-747F-4558-9FB7-87BF7FC0C450

The settings in the “Tyre pressures” menu are all

related to the Tyre pressure monitoring system TPMS

(See “Tire Pressure Monitoring System (TPMS)” (P.6-

2), “Tire Pressure Monitoring System (TPMS)” (P.5-4)

and “Tire Pressure Monitoring System (TPMS)” (P.8-

36).).

. Target Front

. Target Rear

. Tyre Pressure Unit

. Calibrate

Target Front:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The “Target Front” tyre pressure is the pressure

specified for the front tyres on the tyre placard (See ,

“Tire Pressure Monitoring System (TPMS)” (P.5-4) and

“Tire placard” (P.9-9).).

Use the

and the ENTER

buttons to

select and change the value for the “Target Front/

Target front” tyre pressure.

Target Rear:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The “Target Rear” tyre pressure is the pressure

specified for the rear tyres on the tyre placard (see ,

“Tire Pressure Monitoring System (TPMS)” (P.5-4) and

“Tire placard” (P.9-9).).

Use the

and the ENTER

buttons to

select and change the value for the “Target Rear” tyre

pressure.

Tyre Pressure Unit:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The unit for tyre pressure that displays in the vehicle

information display can be changed to:

. kPa

. psi

. bar

. Kgf/cm2

Use the

and the ENTER

buttons to

select and change the unit.

If necessary, refer to the following table to convert

between units.

Instruments and controls 2-25

Condition: 'Except for China'/

(82,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

2-26 Instruments and controls

JVI0938X

Calibrate:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The tyre pressure is affected by the temperature of the

tyre; the tyre temperature increases when the car is

driven. To be able to accurately monitor the tyre air

leakage and to prevent false TPMS warnings due to

changes in temperature, the TPMS system uses

temperature sensors in the tyres to perform tempera-

ture compensation calculations.

On rare occasions it may be necessary to recalibrate

the TPMS system reference temperature. This opera-

tion should only be performed when the actual tyre

pressure has been adjusted, whilst the current ambient

temperature is significantly different to the current

calibration temperature. (See “Tire Pressure Monitor-

ing System (TPMS)” (P.5-4).)

Use the

, and the ENTER

switches to

start or cancel the calibration process. While the

calibration process is active, the message: “Resetting

tyre pressure system” will be displayed.

Units (if equipped)

GUID-A1B343C6-49C7-4BF7-9C43-DC08E31FB329

The units that are shown in the vehicle information

display can be changed:

. Distance/Fuel

. Temperature

Use the

, and the ENTER

switches to

select and change the units of the vehicle information

display.

Distance/Fuel:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The unit for the mileage that displays in the vehicle

information display can be changed to:

. km, l/100km

. km, km/l

. miles, MPG (UK)

. miles, MPG (US)

Use the

and the ENTER

switches to

select and change the unit.

Temperature:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The temperature that displays in the vehicle information

display can be changed from:

. 8C (Celsius)

. 8F (Fahrenheit)

Use the ENTER

to toggle choices.

Language (if equipped)

GUID-761627AF-130C-43BD-83EB-A9FF585F1E70

The language of the vehicle information display can be

changed to:

Type A:

. English

. French

. German

. Italian

. Portuguese

. Dutch

. Spanish

. Turkish

. Russian

Type B:

. English

. French

. Spanish

Type C:

. English (U.S.)

. English (UK)

Use the

, and the ENTER

switches to

select and ch ange the language of the v ehicle

information display. The language of the center dis-

play/navigation can be changed independently of the

vehicle information display. For models with navigation

system, see “Vehicle information and settings (models

with navigation system)” (P.4-5). For models without

navigation system, see “Audio system” (P.4-35)

Condition: 'Except for China'/

(83,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

Factory Reset

GUID-DB448A2E-FABE-4978-A5DE-79E15734EC05

The settings in the vehicle information display can be

reset back to the factory default. To reset the vehicle

information display:

1. Select “Factory Reset” using the

switch

and press the ENTER

2. Select “YES” to return all settings back to default

by pressing the ENTER

Instruments and controls 2-27

Condition: 'Except for China'/

(84,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

2-28 Instruments and controls

VEHICLE INFORMATION DISPLAY WARNINGS AND INDICATORS

GUID-2461129B-3328-48DC-B298-BC959F06E2D7

JVI0987X

Condition: 'Except for China'/

(85,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

1. Engine start operation indicator (for Con-

tinuously Variable Transmission (CVT) mod-

els)

GUID-03FA16C2-7F50-4C9B-AF2F-B0DDC79EF70D

This indicator appears when the shift lever is in the “P”

(Park) position.

This indicator means that the engine will start by

pushing the i gnition switch with the brake pedal

depressed. You can start the engine directly in any

position of the ignition switch.

2. Engine start operation indicator (for Manual

Transmission (MT) models)

GUID-93501E1D-F809-4EB5-BA32-FD9965ED01CC

This indicator means that the engine will start by

pushing the ignition switch with the clutch pedal

depressed. You can start the engine directly in any

position of the ignition switch.

You can also start the engine by pushing the ignition

switch with the brake pedal depressed when the shift

lever is in the “N” (Neutral) position.

3. Steering lock release malfunction indicator

(if equipped)

GUID-0EB33230-5508-4D15-B8B1-CAF190FF032F

This indicator appears when the steering lock cannot

be released.

If this indicator appears, push or turn the ignition

switch while lightly turning the steering wheel right and

left.

See “Steering lock” (P.5-10).

4. No Key detected warning (if equipped)

GUID-045D2E0A-90AE-4116-98D3-03BD7BDA254D

This warning appears when the door is closed with the

Intelligent Key left outside the vehicle and the ignition

switch in the “ON” position. Make sure th a t the

Intelligent Key is inside the vehicle.

See “Intelligent Key system” (P.3-10) for more details.

5. Shift to Park warning (Continuously Vari-

able Transmission (CVT) models)

GUID-C5E02B99-2271-4B31-8A31-0E2BDA02DB7A

This warning appears when the ignition switch is

pushed to stop the engine with the shift lever in any

position except the “P” (Park) position.

If this warning appears, move the shift lever to the “P”

(Park) position or place the ignition switch in the “ON”

position.

An inside warning chime will also sound. (See

“Intelligent Key system” (P.3-10).)

6. Key battery low warning (if equipped)

GUID-4D9408BF-3C31-4AFA-B795-838BAD3AA816

This indicator appears when the Intelligent Key battery

is running out of power.

If this indicator appears, replace the battery with a new

one. See “Intelligent Key battery” (P.8-22).

7. Engine start operation for Intelligent Key

system indicator (if equipped)

GUID-793F2918-5212-4C83-B47E-E0B7BD34B2FB

This indicator appears when the Intelligent Key battery

is running out of power and when the Intelligent Key

system and vehicle are not communicating normally.

If this indicator appears, touch the ignition switch with

the Intelligent Key while depressing the brake pedal.

(See “Intelligent Key battery discharge” (P.5-11).)

8. Key ID incorrect warning (if equipped)

GUID-4DF72DD3-352F-4604-B40B-A6F805865315

This warning appears when the ignition switch is

placed from the “LOCK” position and the Intelligent

Key cannot be recognized by the system. You cannot

start the engine with an unregistered key. Use the

registered Intelligent Key.

See “Intelligent Key system” (P.3-10).

9. Release parking brake warning

GUID-713A5EF4-8333-4E87-8C99-5BE63E306339

This warning appears when the vehicle speed is above

7 km/h (4 MPH) (models not equipped with electronic

parking brake) or 4 km/h (2 MPH) (models equipped

with electronic parking brake) and the parking brake is

applied. Stop the vehicle and release the parking

brake.

10. Low fuel level warning

GUID-E3297D49-BBE6-4223-8D26-45B270C32608

This warning appears when the fuel level in the fuel

tank is getting low. Refuel as soon as it is convenient,

preferably before the fuel gauge reaches 0 (Empty).

There will be a small reserve of fuel in the tank when

the fuel gauge needle reaches 0 (Empty).

11. Door/back door open warning

GUID-4E093E87-E79D-4932-A6BA-D33021101EDB

This warning appears if any of the doors and/or the

back door are open or not closed securely. The vehicle

icon indicates which door or the back door is open on

the display.

12. Second row seat belt warning (if

equipped)

GUID-C58ACB5C-4A3A-40F4-8005-598C1067908C

This second row seat belt warning appears after

starting the engine. If any of the second row seat

passenger seat belts is not fastened, a chime will

sound and the seat icon illuminates in red to show

which seat b elt is not fastened. The seat icon

illuminates in red until the corresponding second row

Instruments and controls 2-29

Condition: 'Except for China'/

(86,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

2-30 Instruments and controls

seat passenger’s seat belt is fastened. The warning will

automatically turn off after approximately 35 seconds.

For precautions on seat belt usage, see “Seat belts”

(P.1-9).

13. Key System Fault warning (if equipped)

GUID-45908843-CFF4-4CCD-81A0-E6055843EF07

This warning appears if there is a malfunction in the

Intelligent Key system.

If this warning appears while the engine is stopped, the

engine cannot be started. If this warning appears while

the engine is running, the vehicle can be driven.

However, contact a NISSAN dealer for repair as soon

as possible.

14. Low tyre pressure warning (if equipped)

GUID-CC56E22C-950B-4BAA-AC18-501ADE360704

This warning (“Low tyre pressure” and a vehicle icon -

if equipped) appears when the l o w tire pressur e

warning light in the meter illuminates and low tire

pressure is detected. The warning appears each time

the ignition switch is placed in the “ON” position as

long as the low tire pressure warning light remains

illuminated. If this warning appears, stop the vehicle

and adjust the pressure to the recommended COLD

tire pressure shown on the tire placard. (See “Low tire

pressure warning light” (P.2-14), “Tire Pressure

Monitoring System (TPMS)” (P.6-2).), “Tire Pressure

Monitoring System (TPMS)” (P.5-4) and “Tire Pressure

Monitoring System (TPMS)” (P.8-36).

15. Tyre pressure system fault warning (if

equipped)

GUID-7E94FFB8-85BA-407E-86E9-35D4440D31BF

This warning illuminates when there is a problem with

the Tyre Pressure Monitoring System (TPMS).

If this warning comes on, have the system checked by

a NISSAN deale. See “Low tire pressure warning light”

(P.2-14), “Tire Pressure Monitoring System (TPMS)”

(P.6-2).), “Tire Pressure Monitoring System (TPMS)”

(P.5-4) and “Tire Pressure Monitoring System (TPMS)”

(P.8-36).

16. Low oil pressure Stop vehicle warning (if

equipped)

GUID-4886D40C-6E1C-481A-B24B-9147222D4154

This warning appears if low engine oil pressure is

detected. If the warning appears during normal driving,

pull off the road in a safe area, stop the engine

immediately and call a NISSAN dealer.

The low oil pressure warning is not designed to

indicate a low oil level. Use the dipstick to check the oil

level. (See “Engine oil” (P.8-10).)

CAUTION:

Running the engine with the engine oil pressure

warning displayed could cause serious damage

to the engine.

17. Oil Level Low indicator (for diesel engine

model)

GUID-44E8C9EE-A550-4578-B0BC-CD9597E9BFCC

If the low level indicator is displayed, the engine oil

level is low. If the low level reminder is displayed, check

the level using the engine oil dipstick. (See “Engine oil”

(P.8-10).)

CAUTION:

The oil level should be checked regularly using

the engine oil dipstick. Operating with an

insufficient amount of oil can damage the

engine and such damage is not covered by the

warranty.

18. Oil level sensor warning (for diesel engine

model)

GUID-FCC1D74A-FEA2-43E8-A09D-25FAB64B72FF

If the oil sensor warning is displayed, the engine oil

level sensor may be malfunctioning. Contact a NISSAN

dealer immediately. For more details, see “Oil control

system (for diesel engine model)” (P.2-33).

19. 4WD system fault warning (if equipped)

GUID-744F018D-B3A0-46B9-98CE-8F22CB584FE0

This warning appears when the four-wheel drive

(4WD) system is not functioning properly while the

engine is running. Reduce vehicle speed and have your

vehicle checked by a NISSAN dealer. See “4WD

warning” (P.5-24).

20. 4WD High Temp. Stop vehicle warning (if

equipped)

GUID-B3B19D8E-F280-4789-825F-5EC9478A9881

This warning may appear while trying to free a stuck

vehicle due to increased oil temperature. The driving

mode may change to Two-Wheel Drive (2WD). If this

warning is displayed, stop the vehicle with the engine

idling, as soon as it is safe to do so. Then if the warning

turns off, you can continue driving. See “4WD

warning” (P.5-24).

21. Tyre size incorrect warning (if equipped)

GUID-C179A579-3869-4DBE-B200-742582D81A9F

This warning may appear if there is a large difference

between the diameters of the front and rear wheels

and tires. Pull off the road in a safe area, with the

engine idling. Check that all the tire sizes are the same,

that the tire pressure is correct and that the tires are

not excessively worn. See “4WD warning” (P.5-24).

Condition: 'Except for China'/

(87,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

22. Battery Voltage Low Charge Battery

warning

GUID-1F3B1DD2-74A2-40F0-99DD-0C12928BF4BE

This warning appears when the battery voltage is low

and the battery needs to be charged.

23. Shipping Mode On Push Storage Fuse

warning

GUID-EF1876C4-3B83-41A8-8C73-D10D23C43B8F

This warning may appear if the extended storage fuse

switch is not pushed in (switched on). When this

warning appears, push in (switch on) the extended

storage fuse switch to turn off the warning. For more

information, see “Extended storage fuse switch” (P.8-

26).

24. Headlight system fault warning (if

equipped)

GUID-CB558F6A-E537-4F05-9A4F-E89B7379F99C

This warning appears if t he LED headlights are

malfunctioning. Have the sys tem checked by a

NISSAN dealer.

25. Power will turn off to save the battery

warning

GUID-3C313D28-5CFD-467B-9FC2-AD5A25FA3340

This warning appears after a period of time if the shift

lever has not moved from the “P” (Park) position while

the ignition is in the ON position for a certain period of

time.

26. Power turned off to save the battery

warning

GUID-0970ABC5-CB0F-4B5F-A533-E364CA5A37F0

This w arning appears after the ignition switch is

automatically turned OFF to save the battery.

27. Turn off headlights warning

GUID-DB00B5D9-C887-4399-9B39-3A515068CC94

This warning appears when the driver side door is

opened with the headlight switch is left ON and the

ignition switch is placed in the “OFF” or “LOCK”

position. Place the headlight swit ch in “OF F” or

“AUTO” (if equipped) position. For additional informa-

tion, see “Headlight and turn signal switch” (P.2-39).

28. Press brake pedal warning (for electronic

parking brake equipped models)

GUID-3E2420B9-A238-4616-97EB-11057AE200E0

This indicator appears in the following situations:

. The driver tries to release the electronic parking

brak e manually without depressing the brake

pedal.

. The vehicle is stopped on a steep hill and there is

a possibility of moving backward, even if the

electronic parking brake is applied.

29-30. Time for a driver break? indicator

GUID-5B6EF421-742A-4370-B698-64A84139A090

This indicator appears when the set “Time for a driver

break?” indicator activates. You can set the time for up

to 6 hours.

31. Low outside temperature warning (if

equipped)

GUID-634EFF16-8C9D-493C-A41A-0932E824F6C2

This warning appears if the outside temperature is

below 38C (378F). The warning can be set not to be

displayed.

32. Chassis control system fault warning

GUID-F718EB94-63B5-48EE-A64D-71D88651FC6D

This warning appears if the chassis control module

detects an error in the chassis control system. Have

the system checked by a NISSAN dealer. (See

“Chassis control” (P.5-28).)

33. Speed limiter indicator (if equipped)

GUID-E392035D-EAB2-4999-AC5F-53B566DC53DF

This indicator shows the speed limiter system status.

The status is shown by the color.

For more details, see “Speed limiter” (P.5-41).

34. Cruise indicator (if equipped)

GUID-B56BF289-E01D-4B32-9422-294302093904

This indicator shows the cruise control system status.

The status is shown by the color.

See “Cruise control” (P.5-43) for details.

35. Continuously Variable Transmission (CVT)

position indicator (Continuously Variable

Transmission (CVT) models)

GUID-9E323961-6ABA-4FB7-B081-E0ED83362DE3

This indicator shows the automatic shift position.

In the manual shift mode, when the transmission does

not shift to the selected gear due to a transmission

protection mode, the CVT position indicator will blink

and a chime will sound.

See “Driving with Continuously Variable Transmission

(CVT)” (P.5-13) for further details.

36. ECO mode system indicator (if equipped)

GUID-B9E98019-342F-40AE-9C95-C4EB5F3AEDA6

The ECO mode indicator appears when the ECO

mode system is turned on.

(See “ECO mode system” (P.5-47).

37. System fault warning (if equipped)

GUID-188904A7-8967-4328-9B5E-8F5DDC264F2B

This warning appears when the Blind Spot Warning/

Lane Departure Warning systems are not functioning

properly. (See “Blind Spot Warning (BSW)/Lane

Departure Warning (LDW) systems” (P.5-31), “Blind

Spot Warning (BSW) system (if equipped for Europe)

” (P.5-36) or “Lane Departure Warning (LDW) system

(if equipped for Europe)” (P.5-39).)

Instruments and controls 2-31

Condition: 'Except for China'/

(88,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

2-32 Instruments and controls

38. System fault warning (if equipped)

GUID-43C11339-8D15-4211-B3C2-ACB48599F434

This warning appe ars when the Lane Departure

Warning system is not functioning prop erly. (See

“Lane Departure Warning (LDW) system (if equipped

for Europe)” (P.5-39).)

39. System fault warning (if equipped)

GUID-3B629DD1-B4DF-4353-8E61-E9312DBC4985

This warning appears when the Blind Spot Warning

system is not functioning properly. (See “Blind Spot

Warning (BSW) system (if equipped for Europe) ”

(P.5-36).)

40. Not available Clean Rear Camera warning

(if equipped)

GUID-E57C5D68-F440-4AEA-8ED4-056CE64C71DA

This warning appears if dirt, rain or snow accumulates

on the rear camera and cannot be removed by the

automatic washer and blo wer. See “Blind Spot

Warning (BSW)/Lane Departure Warn ing (LDW)

systems” (P.5-31).

41. Not available Clean Rear Camera warning

(if equipped)

GUID-A081A902-5C70-4E43-B3D2-71F9A3651D69

This warning appears if dirt, rain or snow accumulates

on the rear camera and cannot be removed by the

automatic washer and blo wer. See “Blind Spot

Warning (BSW) system (if equipped for Europe) ”

(P.5-36).

42. CVT System Fault warning (for Continu-

ously Variable Transmission (CVT) models)

GUID-CD1EE263-9177-4863-B0D7-3235AB4C2F77

This warning appears when there is a malfunction with

the CVT system. If this warning comes on, have the

system checked by a NISSAN dealer.

43. Navigation indicator (if equipped)

GUID-A0ACEBD4-5BCB-4F36-B594-C27D3C61E41C

This indicator appears when a corner point is coming.

44. Stop/Start System or Idling Stop System

indicator (if equipped)

GUID-983E95D3-0E17-413D-8088-8197FA3E767D

This indicator shows the Stop/Start System or Idling

Stop System status. See “Stop/Start System or Idling

Stop System” (P.5-18).

45. System fault warning (if equipped)

GUID-4444650A-081A-4768-8521-583068E7E6C0

This warning appears when the Driver Attention Alert

system malfunctions.

For more details, see “Driver Attention Alert” (P.2-36).

46. System fault warning (if equipped)

GUID-389FB697-B268-42F7-AF08-1A20E8CADE9C

This warning appears when the Traffic Sign Recogni-

tion system malfunctions.

For more details, see “Traffic Sign Recognition” (P.2-

37).

47. System fault warning (if equipped)

GUID-6BC03A52-AC77-4150-B41E-C37ED5C2E7C1

This warning appears when the forward emergency

braking system malfunctions.

For more details, see “Forward emergency braking

system” (P.5-45).

48. Not Available Front Radar Obstruction

warning (if equipped)

GUID-B918C838-18FC-4E97-93CB-4724CE47BDC3

If the sensor area of the front bumper is covered with

dirt or obstructed, making it impossible to detect a

vehicle ahead, the forward emergency braking system

is automatically turned off. The forward emergency

braking system warning light (orange) will illuminate

and the [Not Available Front Radar Obstruction]

warning message will appear in the vehicle information

display. If the [Not Available Front Radar Obstruction]

warning message appears, park the vehicle in a safe

location and turn the engine off.

Check to see if the sensor area of the front bumper is

blocked. If the sensor area of the front bumper is

blocked, remove the blocking material. Restart the

engine. If the warning light continues to illuminate, have

the forward emergency braking system checked by a

NISSAN dealer.

49. Not available High cabin temperature

warning (if equipped)

GUID-DACEB17F-898D-45A8-ABF0-07A342413B64

This warning appears if the interior temperature of the

vehicle has reached such a high temperature that the

sensor for the Traffic Sign Recognition and Lane

Departure warning systems can no longer function

reliably. Once the interior temperature has reached

normal levels, the warning should disappear.

If the warning continues to display, have the system

checked by a NISSAN dealer.

50. Parking Sensor System Fault warning (if

equipped)

GUID-5581C82C-9384-4E26-9F4E-254058191995

This warning illuminates when there is a problem with

the parking sensor system. If this warning comes on,

have the system checked by a NISSAN dealer.

Condition: 'Except for China'/

(89,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

OIL CONTROL SYSTEM (for diesel engine

model)

GUID-F5E35C98-7F4D-4E23-9665-7CEF2BF92803

JVI0988X

When the ignition switch is in the “ON” position,

engine oil information is displayed.

Engine oil information informs the dist a n c e to oil

change, oil level indication and malfunction of oil level

sensor.

1. Distance to oil change

GUID-0C6CE119-CD5D-44E4-907C-B28ACCB06 747

The distance to oil change is displayed if the distance

to oil change is less than 1,500 km (930 miles).

2. Oil replacement indicator

GUID-537E1CBF-A948-4E30-BE63-AC30F47F8075

When the set mileage approaches, the engine oil

replacement indicator will appear on the display. After

the oil is changed, reset the distance to oil change. The

oil replacement indicator will not be reset automati-

cally. To reset this indicator, see “Settings” (P.2-21).

The distance to oil change interval cannot be adjusted

manually. The distance to oil change interval is set

automatically.

CAUTION:

If the oil replacement indicator is displayed,

change the engine oil as soon as possible.

Operating your vehicle with deteriorated oil can

damage the engine.

3. Low level reminder

GUID-B0ADD144-90CE-4C0F-BF0D-306D7D7AFEF0

If the low level indicator is displayed, the engine oil

level is low. If the low level reminder is displayed, check

the level using the engine oil dipstick. (See “Engine oil”

(P.8-10).)

CAUTION:

The oil level should be checked regularly using

the engine oil dipstick. Operating with an

insufficient amount of oil can damage the

engine and such damage is not covered by the

warranty.

4. Oil level sensor warning

GUID-A99E9E17-0261-4EDD-8396-B6B68FFB9EAF

If the oil sensor warning is displayed, the engine oil

level sensor may be malfunctioning. Contact a NISSAN

dealer immediately.

Instruments and controls 2-33

Condition: 'Except for China'/

(90,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

2-34 Instruments and controls

TRIP COMPUTER

GUID-16910388-C40D-4FCA-8490-D504D64878A0

JVI0986X

Condition: 'Except for China'/

(91,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

1-2. Driving aids (if equipped)

GUID-1EC5FD58-F86A-452E-A3B1-FC762082EBFC

The driving aids mode shows the operating condition

for the following systems.

. Lane Departure Warning (LDW)

. Blind Spot Warning (BSW)

. Forward Emergency Braking (if equipped)

For more details, see “Blind Spot Warning (BSW)/

Lane Departure Warning (LDW) systems” (P.5-31),

“Forward emergency braking system” (P.5-45), “Blind

Spot Warning (BSW) system (if equipped for Europe)

” (P.5-36) or “Lane Departure Warning (LDW) system

(if equipped for Europe)” (P.5-39).

3. Speed and Average speed (km/h or MPH)

GUID-2595FB2A-042A-4F44-960A-DBB6B44ECD8F

The (digital) speed shows the current speed at which

the vehicle is travelling.

The average speed mode shows the average vehicle

speed since the last reset. Resetting is done by

pushing the ENTER

(Type A) or

(Type B)

switch for longer than 1 second.

The display is updated every 30 seconds. The first 30

seconds after a reset, the display shows “—–”.

4. Average speed (km/h or MPH)

GUID-46402B30-C682-4751-94BB-468B9070A88D

The average speed mode shows the average vehicle

speed since the last reset. Resetting is done by

pushing the ENTER

(Type A) or

(Type B)

switch for longer than 1 second.

The display is updated every 30 seconds. The first 30

seconds after a reset, the display shows “—–”.

5-6. Elapsed time and trip odometer (km or

mile)

GUID-29620F29-C173-4C39-8FA4-0268AD527CD3

Elapsed time:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The elapsed time mode shows the time since the last

reset. The displayed time can be reset by pushing the

ENTER

(Type A) or

(Type B) switch for

longer than 1 second. (The trip odometer is also reset

at the same time.)

Trip odometer:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The trip odometer mode shows the total distance the

vehicle has been driven since the last reset. Resetting

is done by pushing the ENTER

(Type A) or

(Type B) switch for longer than 1 second. (The

elapsed time is also reset at the same time.)

7. Distance to empty (dte — km or mile)

GUID-D8755900-BA82-4CA1-B137-5DF6AF6576DD

The distance to empty (dte) mode provides you with an

estimation of the distance that can be driven before

refueling. The dte is constantly being calculated, based

on the amount of fuel in the fuel tank and the actual fuel

consumption.

The display is updated every 30 seconds.

The dte mode includes a low range warning feature. If

the fuel level is low, the warning is displayed on the

screen.

When the fuel level drops even lower, the dte display

will change to “——”.

. If the amount of fuel added is small, the display

just before the ignition switch is placed in the

“OFF” position may continue to be displayed.

. When driving uphill or rounding curves, the fuel in

the tank shifts, which may momentarily change the

display.

8-9. Fuel economy (l (litre)/100 km, km/l(litre)

or MPG)

GUID-B5D9FEEB-074C-4E3A-A0E2-8E0268A990C7

Current fuel consumption:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The current fuel consumption mode shows the current

fuel consumption.

Average fuel consumption:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Th e average fuel consumption mode shows the

average fuel consumption since the last reset. Reset-

ting is done by pushing the ENTER

(Type A) or

(Type B) switch for longer than 1 second.

The display is updated every 30 seconds. For about

the first 500 m (1/3 mile) after a reset, the display

shows “——”.

10. Audio (if equipped)

GUID-29443D83-E73B-4CAE-AEA0-08FD317D9E5B

The audio mode shows the status of audio information.

11. Navigation (if equipped)

GUID-A164C653-CED8-49F4-8576-81E50749D665

When the route guidance is set in the navigation

system, this item shows the navigation route informa-

tion.

12. Compass (if equipped)

GUID-BD7DB697-776A-4539-A5A9-55381B2AD02D

This display indicates the heading direction of the

vehicle.

13. “4x4-i” display (if equipped)

GUID-6160F57A-6E13-4425-B26D-6825D16A12CD

When the “4x4-i” display is selected, you can view the

distribution ratio of the transmission torque to the front

and rear wheels during driving.

Instruments and controls 2-35

Condition: 'Except for China'/

(92,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

2-36 Instruments and controls

14. Chassis control

GUID-869FF358-E269-4A5A-BA18-1921FD93603F

When Active Trace Control, Active Engine Brake or

Active Ride Control system is operated, it shows the

operating condition. It also shows operating condition

of Hill Start Assist or the Hill Descent Control. See

“Active Trace Control” (P.5-28), “Active Engine Brake

(Continuously Variable Transmission (CVT) models)”

(P.5-28), “Active Ride Control” (P.5-29), “Hill Start

Assist system” (P.5-30) or “Hill des cen t control

system” (P.5-30) for more details.

15. Tyre Pressures (if equipped)

GUID-0023E777-0057-4349-9A1D-2E51F69EEB28

The tire pressure mode shows the pressure of all four

tyres while the vehicle is driven.

When the Low Tyre Pressure warning appears, the

display can be switched to the tire pressure mode by

pushing the ENTER switch

to reveal additional

details on the displayed warning.

16. Driver Attention Alert system (if equipped)

GUID-36827261-8F9C-4388-9529-475E767E148C

When the “Driver Attention Alert” display is selected,

you can view your attention level as detected by the

system. For more information see “Driver Attention

Alert” (P.2-36).

17. Stop/Start System or Idling Stop System

(if equipped)

GUID-258D3265-C574-4352-9FED-EB219DF828CE

The Stop/Start System or Idling Stop System mode

shows the CO2 or fuel savings and the engine stop

time. (See “Stop/Start System or Idling Stop System”

(P.5-18).)

Trip CO2 or fuel saving and engine stop time:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The trip CO2 or fuel saving and engine stop time mode

shows amount of CO2 or fuel saved and the engine

stop time since the last reset.

The CO2 or fuel saving and engine stop time can be

reset by pushing the ENTER switch

(Type A) or

(Type B) in the “Stop/Start” menu. For more

information, see “Display Settings” (P.2-22).

Total CO2 or fuel saving and engine stop time:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

The total CO2 or fuel saving and engine stop time

mode shows:

. The estimated CO2 exhaust emissions prevented.

(for Europe and South Africa)

. The estimated quantity of saved fuel. (for Australia

and New Zealand)

. The time that the engine has been stopped for by

the Stop/Start System or Idling Stop System.

NOTE:

The Total CO2 or fuel saving and engine stop

time values cannot be reset and show accumu-

lated Stop/Start System or Idling Stop System

information since the vehicle was built.

18. Traffic Sign Recognition (if equipped)

GUID-C22DF58C-CD47-45F9-8CFC-2B5D3E42F62D

The Traffic Sign Recognition (TSR) system provides

the driver with information about the most recently

detected speed limit. For more details, see “Traffic

Sign Recognition” (P.2-37).

CLOCK AND OUTSIDE AIR TEMPERATURE

GUID-E27E1606-2B37-4B43-92B1-ED0349E35346

JVI0932X

The clock

and outside air temperature

are

displayed on the upper side of the vehicle information

display.

Clock

T32A130827-CA60079E-C0A7-4156-9588-074D8F0DC1C9

For clock adjustment, see “Clock” (P.4-6) or “Audio

settings” (P.4-58).

Outside air temperature (8C or 8F )

GUID-7885796A-D264-4AB0-9D1B-EA2294C088A3

The outside air temperature is displayed in 8C or 8F in

the range of −40 to 608C (−40 to 1408F ).

The outside air temperature mode includes a low

temperature warning feature. If the outside air tem-

perature is below 38C (378F), the warning

displayed on the screen (if equipped).

The outside temperature sensor is located in front of

the radiator. The sensor may be affected by road or

engine heat, wind directions and other driving condi-

tions. The display may differ from the actual outside

temperature or the temperature displayed on various

signs or billboards.

DRIVER ATTENTION ALERT (if equipped)

GUID-3F4DD0FC-EDBD-4CCC-8B0E-DA2B1513CDD0

The [Driver Attention] option can be used to activate or

deactivate the Driver Attention Support feature. This

system is able to detect whethe r the driver is

displaying a lack of attention, or is distracted.

It does this by monitoring driving style, and steering

behavior, and it notes deviations from the normal

pattern. If the system detects that driver attention is

decreasing, the system uses an audible and visual

warning to suggest that the driver take a break.

WARNING:

This system is not designed to assist driving

impaired due to fatigue, or other causes. Be

attentive at all times, and avoid driving when

Condition: 'Except for China'/

(93,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

tired. Failure to do so could cause you to lose

control of the vehicle, resulting in a serious

accident.

System operation

GUID-0B3AD093-EEF1-40B9-8695-B2ABA1B786CC

JVI0991X

If the system detects that driver attention is decreas-

ing, the message “Time for a driver break?” appears in

the vehicle information display and a buzzer sounds

when the vehicle is driven at speeds above 60 km/h

(37 MPH).

Attention level indicator:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

JVI0992X

When the “Driver attention” display is selected, you

can view your attention level as detected by the

system.

For more information see “Settings” (P.2-21).

NOTE:

. The at tention level indicator consists of

eight levels.

. When stopping the engine, the system is

reset.

Turning the Driver Attention Alert system on

and off

GUID-CAEA4B27-0BBE-4162-989F-3A0A3B28B80C

To activate or deactivate this function, see “Settings”

(P.2-21).

NOTE:

The setting will be retained even if the engine is

restarted.

System Malfunction

GUID-9B32811F-1E3D-485A-BE8E-BEE91D110087

If the Driver Attention Alert system malfunctions, the

system warning message will appear in the vehicle

information display and the function will be stopped

automatically.

Action to take:

GUID-22018305-9BAB-4201-B6FC-C08EB94AEAE0

Stop the vehicle in a safe location, and then turn off

and restart the engine. If the system warning message

continues to appear, have the system checked by a

NISSAN dealer.

TRAFFIC SIGN RECOGNITION (if equipped)

GUID-B4DC19B1-EA1A-43B9-940E-735647D4C6F8

JVI0975X

The Traffic Sign Recognition (TSR) system provides

the driver with information about the most recently

detected speed limit. The system captures the road

sign information with the multi-sensing front camera

unit

located on the windshield in front of the inside

rearview mirror and displays the detected signs in the

vehicle information display. For vehicles equipped with

navigation system, the speed limit displayed is based

on a combination of navigation system data and live

camera recognition. TSR information is always dis-

played at the top of the vehicle information display, and

optionally in the main central area of the display screen.

WARNING:

The TSR system is only intended to be a support

device to provide the driver with information. It

is not a replacement for the driver’s attention to

tra ffic conditions or responsibility to drive

safely. It cannot prevent accidents due to care-

lessness. It is the driver’s responsibility to stay

alert and drive safely at all times.

Instruments and controls 2-37

Condition: 'Except for China'/

(94,1)

[ Edit: 2014/ 11/ 7 Model: T32-A ]

2-38 Instruments and controls

System operation

GUID-7C2EFAA2-1216-43AB-AED6-957C5B6F668D

The traffic recognition system displays the following

types of road sign:

JVI1004X

JVI0973X

Latest detected speed limit.

National speed limit

No speed limit information.

No-overtaking zone.

End of no-overtaking zone.

Conditional speed limit, with the following

available conditions:

Snow

Slip (rain 1)

Rain (rain 2)

Towing

Generic

CAUTION:

. The Traffic Sign Recognition (TSR) system is

intended as an aid to careful driving. It is the

driver’s responsibility to stay alert, drive

safely, and observe all road regulations that

currently apply, including looking out for

road signs.

. The Traffic Sign Recognition (TSR) system

may not function properly under the follow-

ing conditions:

— When rain, snow or dirt adheres to the

windshield in front of the TSR camera

unit.

— When the headlights are not bright due

to dirt on the lens or if the aiming is not

adjusted properly.

— When strong light enters the camera

unit. (For example, the light directly

shines on the front of the vehicle at

sunrise or sunset.)

— When a sudden change in brightness

occurs. (For example, when the vehicle

enters or exits a tunnel or under a

bridge.)

— In areas not covered by the navigation

system.

— If there are deviations in relation to the

navigation, for example due to changes

in the road routing.

— When overtaking buses or trucks with

speed stickers.

Condition: 'Except for China'/

Instruments and controls -> Vehicle information display for Your Nissan X Trail SUV Second Generation (2007-2012)

Related Topics

Popular Owner Manuals

Latest Owner Manuals