.
The time that the engine has been stopped
for by the Stop/Start System or Idling Stop
System.
13. Tyre pressures (if equipped)
The tire pressure mode shows the pressure of
all four tires while the vehicle is driven.
Clock
For clock adjustment, see “Clock” (P.2-23),
“Clock” (P.4-7), “Audio main operation” (P.4-47),
“Audio main operation” (P.4-55), “Audio main
operation” (P.4-61) or the NissanConnect Own-
er’s Manual.
NOTE:
When the Low Tyre Pressure warning appears,
the display can be switched to the tire pressure
mode by pushing the OK button to reveal
additional details on the displayed warning.
The Total CO2 or fuel saving and engine stop
time values cannot be reset and show
accumulated Stop/Start System or Idling
Stop System information since the vehicle
was built.
Outside air temperature (°C or °F )
The outside air temperature is displayed in °C
or °F in the range of −40 to 60°C (−40 to 140°F ).
14. Intelligent Driver Alertness system (if
equipped)
When the “Driver Attention” display is selected,
you can view your attention level as detected
by the system. For more information see
“Intelligent Driver Alertness” (P.2-40).
16. Traffic Sign Recognition (if equipped)
The outside air temperature mode includes a
low temperature warning feature. If the outside
air temperature is below 3°C (37°F), the warning
is displayed on the screen (if equipped).
The Traffic Sign Recognition (TSR) system
provides the driver with information about the
most recently detected speed limit. For more
details, see “Traffic Sign Recognition” (P.2-41).
The outside temperature sensor is located in
front of the radiator. The sensor may be
affected by road or engine heat, wind direc-
tions and other driving conditions. The display
may differ from the actual outside temperature
or the temperature displayed on various signs
or billboards.
15. Stop/Start System or Idling Stop
System (if equipped)
The Stop/Start System or Idling Stop System
mode shows the CO2 or fuel savings and the
engine stop time. (See “Stop/Start System or
Idling Stop System” (P.5-24).)
CLOCK AND OUTSIDE AIR TEMPERA-
TURE
Trip CO2 or fuel saving and engine stop time:
INTELLIGENT DRIVER ALERTNESS (if
equipped)
The "Driver Attention" option can be used to
activate or deactivate the Driver Attention
Support feature. This system is able to detect
The trip CO2 or fuel saving and engine stop
time mode shows amount of CO2 or fuel saved
and the engine stop time since the last reset.
The CO2 or fuel saving and engine stop time
can be reset by pushing the OK button. For
more information, see “Stop/Start” (P.2-24).
whether the driver is displaying
attention, or is distracted.
a
lack of
JVI0932X
It does this by monitoring driving style, and
steering behavior, and it notes deviations from
the normal pattern. If the system detects that
driver attention is decreasing, the system uses
an audible and visual warning to suggest that
the driver take a break.
Total CO2 or fuel saving and engine stop
time:
The clock
and outside air temperature
are
displayed on the upper side of the vehicle
information display.
The total CO2 or fuel saving and engine stop
time mode shows:
.
The estimated CO2 exhaust emissions pre-
vented. (for Europe and South Africa)
.
The estimated quantity of saved fuel. (for
Australia and New Zealand)
2-40 Instruments and controls
English 
