Get Instruments and controls -> Meters and gauges Guide for Nissan X Trail SUV Fourth Generation (2022-2026)

METERS AND GAUGES

SPEEDOMETER AND ODOMETER

Speedometer

JVI1006X

The speedometer indicates the vehicle speed

(km/h or MPH).

Distance to empty (dte — km or mile)/Odometer

JVC0581X

Tachometer

Warning/indicator lights

Vehicle information display

— Odometer/twin trip odometer

Speedometer

JVI1603X

Distance to empty (dte — km or mile):

Engine coolant temperature gauge

Fuel gauge

The distance to empty (dte)

provides you

with an estimation of the distance that can be

driven before refueling. The dte is constantly

being calculated, based on the amount of fuel

in the fuel tank and the actual fuel consump-

tion.

Instruments and controls 2-9

The display is updated every 30 seconds.

Resetting twin trip odometer:

The dte mode includes a low range warning

feature. If the fuel level is low, the warning is

displayed on the screen.

Push the TRIP RESET switch

second to reset the trip odometer to zero.

for more than 1

TACHOMETER

When the fuel level drops even lower, the dte

display will change to “———”.

If the amount of fuel added is small, the

display just before the ignition switch is

placed in the “OFF” position may continue

to be displayed.

When driving uphill or rounding curves, the

fuel in the tank shifts, which may momen-

tarily change the display.

JVI0820X

Type B

Odometer/Twin trip odometer:

After the ignition switch is placed in the “OFF”

or “LOCK” position from “ON” position, the

odometer/twin trip odometer stays on for 30

seconds. With the ignition switch in the “OFF”

position, when you open any door then close all

doors, the odometer/twin trip odometer stays

on for 30 seconds.

JVI0951X

The tachometer indicates the engine speed in

revolutions per minute (rpm). Do not rev the

engine into the red zone

The red zone varies with models.

The odometer/twin trip odometer is displayed

in the vehicle information display when the

ignition switch is in the “ON” position.

ENGINE COOLANT TEMPERATURE

GAUGE

JVI0796X

Type C

The engine coolant temperature gauge indi-

cates the engine coolant temperature.

The odometer displays the total distance the

vehicle has been driven.

The twin trip odometer displays the distance

of individual trips.

The engine coolant temperature is normal

when the gauge needle points within the zone

shown in the illustration.

Changing odometer/twin trip odometer dis-

play:

The engine coolant temperature will vary with

the outside air temperature and driving condi-

tions.

Push the TRIP RESET switch

(located on the

instrument panel) to change the display as

follows:

CAUTION:

ODO ? TRIP A ? TRIP B ? ODO

JVI0999X

If the gauge indicates the engine coolant

temperature is near the hot (H) end of the

normal range, reduce vehicle speed to

Type A

2-10 Instruments and controls

decrease the temperature.

CAUTION:

If the gauge is over the normal range,

stop the vehicle as soon as safely possi-

ble and let the engine idle.

Refuel before the gauge reads the empty (0)

position.

If the engine is overheated, continued

operation of the vehicle may seriously

damage the engine. (See “If your vehicle

overheats” (P.6-11) for immediate action

required.)

There is a small reserve of fuel in the tank when

the fuel gauge reads the empty (0) position.

Malfunction Indicator Light (MIL)

For Korea:

If the Malfunction Indicator Light (MIL) illumi-

nates while the engine is running, it may

indicate that the fuel-filler cap is loose or

missing, or that the fuel level is low. Make sure

that the fuel-filler cap is installed and closed

tightly, and that a sufficient amount of fuel

remains in the fuel tank. (See “Malfunction

Indicator Light (MIL)” (P.2-19).)

FUEL GAUGE

JVI0661M

The instrument brightness control switch can

be operated when the ignition switch is in the

“ON” position. When the switch is operated, the

vehicle information display switches to the

brightness adjustment mode.

Push the + side of the switch

meter panel lights and instrument panel lights

(if equipped). The bar moves to the + side.

to brighten the

INSTRUMENT BRIGHTNESS CONTROL

Push the - side of the switch to dim the

lights. The bar moves to the − side.

JVI0640X

The vehicle information display returns to the

normal display when the instrument brightness

control switch is not operated for more than 5

seconds.

The fuel gauge indicates the approximate fuel

level in the tank when the ignition switch is in

the “ON” position.

The gauge may move slightly during braking,

turning, accelerating, or going up and down

hills due to movement of fuel in the tank.

CONTINUOUSLY VARIABLE TRANSMIS-

SION (CVT)/DUAL CLUTCH TRANSMIS-

SION (DCT) POSITION INDICATOR (if

equipped)

The Continuously Variable Transmission (CVT)/

Dual Clutch Transmission (DCT) position indi-

cator indicates the shift lever position when the

ignition switch is in the “ON” position.

The low fuel warning

appears on the

JVI0644X

vehicle information display when the fuel level

in the tank is getting low. Refuel as soon as it is

convenient, preferably before the gauge reads

0 (empty).

The arrow, , indicates the fuel-filler lid is

located on the right side of the vehicle.

Instruments and controls 2-11

Instruments and controls -> Meters and gauges for Your Nissan X Trail SUV Fourth Generation (2022-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals