2022-2026 Nissan X Trail SUV Maintenance and do-it-yourself -> Lights User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Maintenance and do-it-yourself -> Lights for Your Nissan X Trail SUV Fourth Generation (2022-2026)

LIGHTS  
2. Be sure the headlight switch is in the “OFF”  
position.  
Extended storage fuse switch  
HEADLIGHTS  
LED headlight bulb  
If replacement is required, contact a NISSAN  
dealer.  
3. Remove the fuse box cover.  
4. Pinch the locking tabs found on each  
side of the extended storage fuse switch.  
5. Pull the extended storage fuse switch  
straight out from the fuse box  
Halogen headlight bulb  
.
The halogen headlight is a semi-sealed beam  
type which uses replaceable headlight (halo-  
gen) bulbs. They can be replaced from inside  
the engine compartment without removing the  
headlight assembly.  
How to remove the extended storage fuse  
switch:  
1. To remove the extended storage fuse  
switch, be sure the ignition switch is in the  
“OFF” or “LOCK” position.  
JVM0415X  
CAUTION:  
Example  
2. Be sure the headlight switch is in the “OFF”  
position.  
To reduce battery drain, the extended storage  
fuse switch comes from the factory switched  
off. Prior to delivery of your vehicle, the switch is  
pushed in (switched on) and should always  
remain on.  
High-pressure halogen gas is sealed inside  
the bulb. The bulb may break if the glass  
envelope is scratched or the bulb is dropped.  
3. Remove the fuse box cover.  
4. Pinch the locking tabs found on each  
side of the extended storage fuse switch.  
5. Pull the extended storage fuse switch  
straight out from the fuse box  
If the extended storage fuse switch is not  
pushed in (switched on), the “Shipping Mode  
On Push Storage Fuse” warning may appear in  
the vehicle information display. See “Vehicle  
information display warnings and indicators”  
(P.2-30).  
.
If any electrical equipment does not operate,  
remove the extended storage fuse switch and  
push it in again.  
NOTE:  
If the extended storage fuse switch malfunc-  
tions, see a NISSAN dealer.  
How to remove the extended storage fuse  
switch:  
1. To remove the extended storage fuse  
switch, be sure the ignition switch is in the  
“OFF” or “LOCK” position.  
Maintenance and do-it-yourself 8-33  
Low-beam:  
High-beam:  
CAUTION:  
.
.
When handling the bulb, do not touch the  
glass envelope.  
Use the same number and wattage as  
originally installed:  
Halogen headlight model  
High beam bulb: 65W (H9)  
Low beam bulb: 55W (H11)  
.
Do not leave the bulb out of the headlight  
reflector for a long period of time as dust,  
moisture and smoke may enter the head-  
light body and affect the performance of  
the headlight.  
Aiming adjustment is not necessary if only the  
bulbs are replaced. When aiming adjustment is  
necessary, contact a NISSAN dealer.  
Fog may temporarily form inside the lens of the  
exterior lights in the rain or in a car wash. A  
temperature difference between the inside and  
the outside of the lens causes the fog. This is  
not  
collect inside the lens, contact a NISSAN dealer.  
a
malfunction. If large drops of water  
JVM0395X  
JVM0396X  
1.  
Disconnect the battery negative cable.  
Disconnect the electrical connector  
from the rear end of the bulb.  
1.  
Disconnect the battery negative cable.  
2.  
2.  
Turn the cover  
remove the cover.  
counter clockwise and  
3.  
4.  
Remove the headlight bulb by turning it  
counter clockwise. Do not shake or rotate  
the bulb when removing it.  
3.  
4.  
Disconnect the electrical connector  
from the rear end of the bulb.  
Remove the headlight bulb by turning it  
counter clockwise. Do not shake or rotate  
the bulb when removing it.  
Install the new bulb in the reverse order of  
removal.  
5.  
Install the new bulb in the reverse order of  
removal.  
8-34 Maintenance and do-it-yourself  
EXTERIOR LIGHTS  
INTERIOR LIGHTS  
Item  
Wattage (W)  
Wattage (W)  
LED  
Item  
Front turn signal light  
21  
Map lights  
Front clearance light/Day-  
time running light*  
LED  
Vanity mirror light (if  
equipped)  
1.8  
Front fog light (if equipped)  
Side turn signal light*  
Rear combination light  
Turn signal  
35  
LED  
8
Console light  
LED  
Room light (if equipped)  
Rear personal light (if  
equipped)  
8
21  
21  
5
Luggage room light  
Stop  
1.4  
Glove box light (if equipped)  
Tail light*  
LED  
16  
Reverse light  
Rear fog light (if equipped)  
High-mounted stop light*  
License plate light  
21  
LED  
5
*: See a NISSAN dealer for replacement.  
Maintenance and do-it-yourself 8-35  
1.  
Clearance light/Daytime running light  
Headlight (high-beam)  
Headlight (low-beam)  
LIGHT LOCATIONS  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
Front map light  
Room light (if equipped)  
Side turn signal light  
Front turn signal light  
Front fog light (if equipped)  
High-mounted stop light  
10. Luggage room light (if equipped)  
11.  
Rear combination light (tail light, stop  
light, rear turn signal light)  
12. Rear personal light (if equipped)  
13. Rear fog light (if equipped)  
14. License plate light  
15. Reverse light/Tail light  
WAI0035X  
8-36 Maintenance and do-it-yourself  
:
:
REMOVE  
INSTALL  
Replacement procedures  
All other lights are either type A, B, C, D, E or F.  
When replacing a bulb, first remove the lens  
and/or cover.  
JVM0397X  
Front turn signal light  
JVM0417X  
SDI1679  
Front fog light  
Maintenance and do-it-yourself 8-37  
JVM0769X  
JVM0770X  
JVM0419X  
Rear combination light  
Reverse light  
License plate light  
8-38 Maintenance and do-it-yourself  
SDI1499A  
Room light (if equipped)  
JVM0420X  
SDI2031  
Rear fog light (if equipped)  
JVM0426X  
Rear personal light (if equipped)  
Luggage room light  
LEGAL REQUIREMENT TO ADJUST  
HEADLIGHT BEAM  
When the vehicle is driven in a country where  
the driving lane is different to your home  
country, affix an opaque sticker on the head-  
light.  
SDI1839  
Vanity mirror light (if equipped)  
Maintenance and do-it-yourself 8-39  
JVM0393X  
Left-Hand Drive (LHD) model  
8-40 Maintenance and do-it-yourself  
NOTE:  
Align the mark  
with the center mark  
of the headlight bulb.  
JVM0394X  
Right-Hand Drive (RHD) model  
1. Place the ignition switch in the “OFF”  
NOTE:  
.
position and wait until the headlights cool  
down.  
Use an opaque material that prevents  
the light from passing through it.  
2. Prepare the stickers referring to the figure.  
Make the stickers  
.
Note that other transparent materials  
do not work effectively.  
that will be affixed to  
the surface of the right side headlight and  
the left side headlight.  
3. Affix the sticker by aligning the corner  
the sticker with the position of the mark  
of  
that is located on the surface of the head-  
light seen from front.  
Affix the sticker as illustrated by aligning  
the mark  
with dividing lines  
and  
.
Maintenance and do-it-yourself 8-41  

Related Topics

Maintenance and do-it-yourself
Engine compartment check locations Engine cooling system Engine oil Drive belt Spark plugs (gasoline engine models) Brakes Continuously Variable Transmission (CVT) fluid (if equipped) Dual Clutch Transmission (DCT) fluid (if equipped) Air cleaner filter Wiper blades Window washer fluid Battery Variable voltage control system (if equipped) Fuses Tires and wheels

Popular Owner Manuals

Audi
Audi
BMW
BMW
Citroen
Citroen
Ford
Ford
Honda
Honda
Peugeot
Peugeot