WINDOW WASHER FLUID
Replacing
JVM0380X
SDI2359
WARNING:
Replace the wiper blades if they are worn.
REAR WINDOW WIPER BLADE
Contact a NISSAN dealer if checking or replace-
ment is required.
Anti-freeze is poisonous and should be
stored carefully in marked containers out of
the reach of children.
Before replacing the wiper blades, the wiper
should be in the fully up position to avoid
scratching the engine hood or damaging the
wiper arm. To pull up the wiper arm, see “Wiper
and washer switch” (P.2-57).
To check the fluid level, use your finger to plug
the center hole of the cap/tube assembly,
then remove it from the reservoir.
1. Lift the wiper arm away from the wind-
shield.
If there is no fluid in the tube, add fluid.
2. Push and hold the release tab , and then
move the wiper blade down the wiper arm
Add a washer solvent to the water for better
cleaning. In the winter season, add a windshield
washer anti-freeze. Follow the manufacturer’s
instructions for the mixture ratio.
to remove
.
3. Remove the wiper blade.
4. Insert the new wiper blade onto the wiper
arm until it clicks into place.
CAUTION:
.
.
After wiper blade replacement, return the
wiper arm to its original position. Other-
wise the wiper arm or the engine hood
may be scratched and may cause da-
mage when the engine hood is opened.
Worn wiper blades can damage the wind-
shield and impair driver vision.
Maintenance and do-it-yourself 8-25
English 
