VARIABLE VOLTAGE CONTROL
SYSTEM (if equipped)
FUSES
The variable voltage control system measures
the amount of electrical discharge from the
battery and controls voltage generated by the
alternator.
ENGINE COMPARTMENT
CAUTION:
.
.
Do not ground accessories directly to the
battery terminal. Doing so will bypass the
variable voltage control system and the
vehicle battery may not charge comple-
tely.
SDI1753
Use electrical accessories with the engine
running to avoid discharging the vehicle
battery.
Type A
JVM0386X
QR25DE engine model (Example)
CAUTION:
Never use fuse of
a
a
higher or lower
amperage rating than that specified on the
fuse box cover. This could damage the
electrical system or cause a fire.
If any electrical equipment does not operate,
check for an open fuse.
SDI1754
1. Be sure the ignition switch is in the “OFF”
position.
Type B
7. Remove the fuse using the fuse puller
located in the passenger compartment.
2. Be sure the headlight switch is in the “OFF”
position.
8. If the fuse is open , replace it with a new
fuse
3. Open the engine hood.
.
4. Remove the air cleaner duct. (See “Engine
compartment check locations” (P.8-6).)
If the new fuse also opens, after installing, have
the electrical system checked, and if necessary
repaired, by a NISSAN dealer.
5. Remove the fuse/fusible link box cover by
using a suitable tool and pushing the tab.
6. Locate the fuse that needs to be replaced.
8-30 Maintenance and do-it-yourself
English 
