CHANGING A BULB
1. Dipped beam headlamps
(H1-55 W or xenon bulb).
Reconnect the connector.
Refit the protective cover.
WARNING: RISK OF ELECTROCU-
TION
Xenon bulbs must be changed by a
PEUGEOT dealer.
Handle the bulbs with a dry
cloth.
The headlamps are fitted
with polycarbonate glass
2. Main beam headlamps
(H7-55 W).
Front lights
In the engine compartment, on the right-
hand side, remove the style trim*:
- press the centre of each plastic
stud A
with a protective coating. Do not
clean them with a dry or abrasive
cloth, nor with a detergent or sol-
vent product.
Remove the protective cover cor-
responding to the faulty bulb.
Disconnect the connector.
Press the end of each securing
clip. Change the bulb.
- remove each plastic stud,
- remove the style trim.
Use a sponge and soapy water.
When fitting the new bulb, ensure
that the direction notches are po-
sitioned correctly and the secur-
ing clips are fixed properly.
When you have finished, do not for-
get to put everything back in place
correctly:
- position the style trim*,
- refit each plastic stud A by pressing
on it.
* According to engine.
122
English 
