Get Practical Information -> Changing a Fuse Guide for Peugeot 307 4 Door 2001-2014

Note: following prolonged operation

of the vehicle at very low speed or at

idle, you may, in exceptional cases,

notice discharges of water vapour

at the exhaust on acceleration. This

has no effect on the behaviour of the

vehicle or on the environment.

Used products

Avoid all prolonged contact of the

used oil with the skin.

Brake ﬂuid is harmful to health and

very corrosive.

Oil ﬁlter

Change the ﬁlter regularly,

in accordance with the serv-

icing schedule.

Manual gearbox

Do not dispose of used oil,

brake ﬂuid or coolant into

drains or onto the ground.

This does not require an oil

change.Havethelevelchecked

in accordance with the manu-

facturer’s servicing schedule.

Brake pads

Empty the used oil into the

containers provided for this

purpose in the PEUGEOT network.

Brake pad wear depends

on the style of driving, in

particular for vehicles which

are used in town, over short

distances.

To check the main levels

and certain components, in

accordance with the manu-

facturer’s servicing sched-

ule,refertothepagesofthe

servicing booklet which correspond

to your vehicle’s engine.

CHECKS

Battery

It may be necessary to check

the thickness of the pads,

even between services.

At the start of winter, have

your battery checked by a

PEUGEOT dealer.

Disc and drum wear status

For any information relating to the wear

status of the surfaces of the discs and

drums, contact a PEUGEOT dealer.

Only use products recom-

mended by PEUGEOT or

products of equivalent quality

and characteristics.

Air ﬁlter and passenger

compartment ﬁlter

To ensure best perform-

ance from components as important

as the power steering and the brak-

ing system, PEUGEOT selects and

offers quite speciﬁc products.

Have the ﬁlter elements re-

placed regularly. If you drive

industyconditions,change

them twice as often.

Handbrake

Where the handbrake travel

is too great or there is a re-

duction in the performance

of the system, the hand-

brake should be adjusted,

even between services.

To prevent damage to the electrical

units, high pressure washing to clean

the engine compartment is strictly

prohibited

Particle emission ﬁlter

(Diesel)

It is imperative that the particle emis-

sion ﬁlter is maintained in accordance

with the manufacturer’s servicing

schedule, by a PEUGEOT dealer.

Have the system checked by a

PEUGEOT dealer.

114

Note: following prolonged operation

of the vehicle at very low speed or at

idle, you may, in exceptional cases,

notice discharges of water vapour

at the exhaust on acceleration. This

has no effect on the behaviour of the

vehicle or on the environment.

Used products

Avoid all prolonged contact of the

used oil with the skin.

Brake ﬂuid is harmful to health and

very corrosive.

Oil ﬁlter

Change the ﬁlter regularly,

in accordance with the serv-

icing schedule.

Manual gearbox

Do not dispose of used oil,

brake ﬂuid or coolant into

drains or onto the ground.

This does not require an oil

change.Havethelevelchecked

in accordance with the manu-

facturer’s servicing schedule.

Brake pads

Empty the used oil into the

containers provided for this

purpose in the PEUGEOT network.

Brake pad wear depends

on the style of driving, in

particular for vehicles which

are used in town, over short

distances.

To check the main levels

and certain components, in

accordance with the manu-

facturer’s servicing sched-

ule,refertothepagesofthe

servicing booklet which correspond

to your vehicle’s engine.

CHECKS

Battery

It may be necessary to check

the thickness of the pads,

even between services.

At the start of winter, have

your battery checked by a

PEUGEOT dealer.

Disc and drum wear status

For any information relating to the wear

status of the surfaces of the discs and

drums, contact a PEUGEOT dealer.

Only use products recom-

mended by PEUGEOT or

products of equivalent quality

and characteristics.

Air ﬁlter and passenger

compartment ﬁlter

To ensure best perform-

ance from components as important

as the power steering and the brak-

ing system, PEUGEOT selects and

offers quite speciﬁc products.

Have the ﬁlter elements re-

placed regularly. If you drive

industyconditions,change

them twice as often.

Handbrake

Where the handbrake travel

is too great or there is a re-

duction in the performance

of the system, the hand-

brake should be adjusted,

even between services.

To prevent damage to the electrical

units, high pressure washing to clean

the engine compartment is strictly

prohibited

Particle emission ﬁlter

(Diesel)

It is imperative that the particle emis-

sion ﬁlter is maintained in accordance

with the manufacturer’s servicing

schedule, by a PEUGEOT dealer.

Have the system checked by a

PEUGEOT dealer.

114

1

CHANGING A WHEEL (SALOON)

Parking the vehicle

If possible, park the vehicle on

level, stable and non-slippery

ground.

Apply the handbrake, switch off

the ignition and engage ﬁrst or re-

verse gear (position P for the au-

tomatic gearbox).

Tools

The following tools are located in a holder in the centre of the spare wheel:

To gain access to the spare wheel

and the jack in the boot, lift the ﬂoor

using the handle.

1. Wheelbrace.

5. Removable towing eye.

6. Alloy wheel bolt trim remover.

7. Alloy wheel trim remover.

2. Jack with handle.

3. Centralising tool.

4. Socket for anti-theft bolt.

A diagram on the holder indicates the location of the tools.

115

1

Extracting the wheel

Unscrew the yellow central bolt a

quarter turn.

Removing the wheel

Raise the vehicle.

Unscrew the bolts and remove the

wheel.

If necessary, place a chock under

the wheel diagonally opposite to

the one to be changed.

Remove the trim, using the wheel-

brace 1 pulling at the valve pas-

sage hole.

Raise the spare wheel towards

you from the rear.

Remove the wheel from the boot.

Fitting a wheel

Position the wheel using the cen-

tralising tool 3 to assist you.

Loosen the wheel bolts (for vehi-

cles ﬁtted with alloy wheels, re-

move the chrome trim ﬁrst. See

paragraph on "Special features of

alloy wheels").

Tighten the bolts by hand and re-

move the centralising tool.

Partly tighten the bolts using the

wheelbrace 1

Fold the jack 2 and remove it.

Fully tighten the bolts using the

wheelbrace 1

Replace the wheel trim, starting

by placing the wheel trim notch

opposite the valve, and press it on

using the palm of the hand.

Place the jack 2 in contact with one

of the four locating points A on the

sub-frame (the one which is clos-

est to the wheel to be changed).

Extend the jack 2 until its base is

in contact with the ground. Ensure

that the centre line of the base of

the jack is straight above the lo-

cating point A used.

116

1

For your safety, always

change the wheel:

- on level, stable, non-slippery

ground,

- with the handbrake on and the igni-

tion switched off,

- with ﬁrst or reverse gear engaged

(position P for the automatic gear-

box),

- with the vehicle chocked.

Never go underneath a vehicle that

is supported only by a jack (use a

ramp).

Put the tool holder back in the

centre of the wheel and clip it.

Putting the wheel back in place

Put the wheel back in place.

After changing the wheel:

- have the tightening of the bolts and

the tyre pressure checked by a

PEUGEOT dealer as soon as pos-

sible,

- have the punctured tyre repaired

and reﬁt it to the vehicle as soon as

possible.

Put the boot ﬂoor back in place.

The wheel must be posi-

tioned ﬂat, in the centre of its

housing.

Wheels ﬁtted with the Tyre Under-

Inﬂation Detection system

For further information refer to "Tyre

under-inﬂation detection" in the safe-

ty section.

Unscrew the yellow central bolt a

few turns, then put it in place in

the centre of the wheel.

Tighten the central bolt fully until it

clicks to secure the wheel ﬁrmly.

Recommendations when using

the temporary spare wheel*

Your vehicle may be equipped with a

spare wheel which has a different rim

to the standard wheel.

After use, it must be replaced as

quickly as possible.

Observe the following instructions to

avoid altering the behaviour of the

vehicle:

- do not exceed 50 mph (80 km/h)

- do not ﬁt a wheel trim,

- drive with care,

- check the tyre pressure indicated

on the label.

* According to model and country.

117

Practical Information -> Changing a Fuse for Your Peugeot 307 4 Door 2001-2014

Related Topics

Popular Owner Manuals

Latest Owner Manuals