Download User Manual App

Quickly access user manual for free!

Safety -> General safety recommendations for Your Peugeot 5008 SUV Third Generation (2024-2025)

Lighting and visibility  
Hold the arm by the rigid section and raise it  
as far as possible.  
Reverse  
Rear wiper  
4
When reverse gear is engaged, the rear wiper  
will come into operation automatically if the front  
windscreen wipers are operating.  
Clean the rear screen using screenwash  
fluid.  
Identify the position of the arm on which the  
wiper blade is attached.  
It is configured in the Settings > Ve-  
hicle touch screen application.Off  
Unclip the worn wiper blade by pulling it  
towards the rear screen and remove it.  
Install the new wiper blade in the same  
position of the arm and clip it into position.  
In the event of accumulation of snow or hard  
frost or if a bicycle carrier is fitted to a towing  
system, deactivate the automatic rear wiper via  
the Settings > Vehicle touch screen application.  
Once again hold the arm by the rigid section,  
then guide it carefully onto the rear screen.  
Turn the ring to align the desired symbol with the  
marking.  
Rear screenwash  
Take care not to use an incorrect position  
during fitting - risk of damage!  
Turn the ring as far as it will go and hold it in  
position.  
Off  
General safety  
recommendations  
The screenwash and the wiper operate for as  
long as the ring remains turned. A final wiping  
cycle is performed when screen washing ends.  
An additional jet is fitted above the number plate  
to clean the reversing camera (depending on  
version).  
Intermittent wiping  
Screenwash-wipe  
Do not remove the labels attached  
in different places on your vehicle.  
They include safety warnings as well as  
identification information for the vehicle.  
Changing a rear wiper blade  
If the ignition has been switched off with the rear  
wiper active, operate the ring to reactivate wiping  
when the ignition is switched on again (unless  
the ignition was off for less than 1 minute).  
The first rotation of the ring to the screenwash  
position triggers a single wipe. If the ring is then  
left in the intermittent wiping position, the rear  
wiper adopts a wiping speed dependent on that  
of the windscreen wipers and the speed of the  
vehicle.  
Depending on country regulations, certain  
safety equipment may be mandatory:  
high visibility safety vests, warning triangles,  
breathalysers, spare bulbs, spare fuses, fire  
extinguisher, first aid kit, mud flaps at the rear  
of the vehicle, etc.  
81