Safety
Automatic operation of
hazard warning lamps
Installing electrical accessories
Installation of accessory radio
communication transmitters
The fitting of electrical equipment or
accessories not approved by PEUGEOT may
cause excessive current consumption and
faults and failures with the electrical system
of your vehicle. Contact a PEUGEOT dealer
for information on the range of approved
accessories.
Before installing a radio communication
transmitter with an external aerial, you must
without fail contact a PEUGEOT dealer for
the specification of transmitters which can
be fitted (frequency, maximum power, aerial
position, specific installation requirements), in
line with the UN ECE Regulation 10.
When braking in an emergency, depending on
the rate of deceleration, the hazard warning
lamps come on automatically. They switch off
automatically when you next accelerate.
They can be switched off by pressing the button.
Horn
Declarations of conformity for radio
equipment
The relevant certificates are
available on the brand website: http://
public.servicebox.peugeot.com/APddb/
Hazard warning lamps
As a safety measure, access to the
diagnostic socket, used for the vehicle's
electronic systems, is reserved strictly for
PEUGEOT dealers or qualified workshops,
equipped with the special tools required (risk
of malfunctions of the vehicle's electronic
systems that could cause breakdowns or
serious accidents). The Manufacturer cannot
be held responsible if this advice is not
followed. Any modification or adaptation not
intended or authorised by PEUGEOT or
carried out without meeting the technical
requirements defined by the Manufacturer will
result in the suspension of the commercial
warranty.
► Press the central part of the steering wheel.
► Pressing this button causes all the direction
indicators to flash.
They can work with the ignition switched off.
82
English 