Access
ALARM
Signalling of attempted intrusion
Good practice
this provides:
to quickly deactivate the siren following
unwanted triggering, unlock the vehicle
using the remote control.
to avoid setting the alarm, before washing
the vehicle for example, lock the vehicle
using the key.
When you return to your vehicle,
flashing of the electronic engine
immobiliser warning lamp or
-
exterior perimeter protection by means of
detectors on the doors and bonnet and
on the electrical supply,
the appearance of a warning
-
-
-
interior protection,
anti-tilt protection,
message in the instrument panel display
indicates an attempted intrusion during your
absence.
protection against the unauthorised
insertion of a key in the starter.
Deactivation using the remote control
the equipment includes a siren.
When this button is pressed, the
alarm is deactivated when the
vehicle is unlocked.
Activation of the alarm
First ensure that all of the accesses are
closed correctly.
Deactivation using the key
unlock the doors using the key and enter
the vehicle. Switch on the ignition to the
RUNNING position, identification of the key
code will switch off the alarm.
the alarm is activated by pressing
this control, the protection is
active after a few seconds.
While the alarm is monitoring, any
intrusion triggers the siren for approximately
30 seconds, accompanied by illumination of
the direction indicators.
Deactivation of the volumetric and
anti-tilt protection
the alarm then returns to monitoring mode.
the alarm is also triggered following an
electrical supply cut-off, when the supply is
restored.
to deactivate the volumetric
and anti-tilt protection, press the
button located in the vehicle's
courtesy lamp. to be effective,
this operation must be repeated every time
the ignition is switched off.
English 
