Starting and stopping
Operation
Do not leave the vehicle while it is
being held in the hill start assist phase.
If you need to leave the vehicle while the
engine is running, apply the parking brake
manually. then ensure that the parking
brake warning lamp is on (not flashing) in
the instrument panel.
HILL START ASSIST
On a slope, with engine running and the
vehicle stationary, the vehicle is held
for a brief moment when you release the
brake pedal:
An integral part of the DSC system, it
facilitates starting on a gradient by keeping
your vehicle immobilised temporarily
(approximately 2 seconds), the time it takes
to move your foot from the brake pedal to
the accelerator pedal.
-
provided you are in first gear or neutral
with a manual gearbox,
this function is only active when:
-
provided you are in position A or M with
-
the vehicle is completely stationary, with
your foot on the brake pedal,
an electronic gearbox,
-
-
the engine is running,
the gradient is steeper than 5 %,
Operating fault
On a descending slope, with the vehicle
stationary, the engine running and reverse gear
engaged, the vehicle is held for a brief moment
when you release the brake pedal.
If a fault occurs with the system,
these warning lamps come on in
the instrument panel. Contact a
PeugeOt dealer or a qualified
workshop to have the system
checked.
In StOP mode of Stop & Start, hill start
assist is inactive.
After 2 seconds, if the vehicle has not
moved off, the system is deactivated
automatically by gradually reducing the
brake pressure. During this phase, the
characteristic sound of brakes being
released will be heard, indicating the
imminent movement of the vehicle.
English 
