Get READY TO SET OFF -> Electronic Gearbox Guide for Peugeot Bipper Van First Generation (2007-2018)

Gearbox and steering wheel

A: automated mode.

Move the lever downwards to select this

mode.

E: economy programme.

Press this button to activate or deactivate it.

ELECTRONIC GEARBOX

Gear lever gate

the five-speed electronic gearbox offers a

choice between the comfort of automated

operation or the pleasure of manual gear

changing.

All movements of the gear lever are given

from the middle position.

N: neutral.

With your foot on the brake, select this

position to start, by moving the gear lever to

the right and then forwards.

this gearbox provides two driving modes:

an automated mode for automatic control

of the gears by the gearbox and therefore

without any action on the part of the

driver,

R: reverse gear.

With the vehicle stationary, keep your foot

on the brake pedal and move the gear lever

to the right and then backwards.

M +/-: sequential mode with manual gear

changing.

a sequential mode for manual changing

of the gears by the driver using the gear

lever.

Displays in the instrument panel

N. Neutral.

R. Reverse.

It consists of:

Make a long push to the left on the lever to

select this mode, then:

1 2 3 4 5. gears engaged.

AUTO. Comes on when automated mode is

selected; it goes off when changing

to sequential mode.

1. a gear lever 1 on the centre console

for selecting the driving mode, reverse

gear and neutral or for changing gear in

sequential mode,

push towards + to change up,

push towards - to change down.

E. It comes on when the economy

programme is activated; it goes off on

deactivation.

2. a button 2 to activate or deactivate the

economy programme.

Gearbox and steering wheel

the AutO or sequential mode used

before switching off the ignition remains

in memory when the vehicle is restarted.

Automated mode

Once you have moved off, you can switch to

automated mode by selecting position A/M.

It is also possible to move off in

2^ndgear on slippery surfaces

(2^ndpress on +).

"AUTO" and the gear engaged

appear in the instrument panel

screen.

By rapidly pushing the accelerator fully

down, the vehicle moves off quickly.

the gearbox then operates in auto-active

mode, without any action on the part of the

driver.

It continuously selects the most appropriate

gear depending on the:

Moving off

You must press the brake pedal.

Start the engine; the gearbox changes into

neutral automatically.

Stopping - Starting on a slope

vehicle speed,

this gearbox is electronically controlled and

does not have a clutch pedal.

engine speed,

accelerator pedal position.

the gear lever stays in the position selected

before switching off the ignition.

"N" appears in the instrument panel screen,

accompanied by an audible signal when

you release the brake pedal, to indicate that

there is a difference between the position of

the gear lever and the gear selected in the

gearbox.

Do not use the accelerator pedal to hold

the vehicle on a slope, apply the parking

brake instead; failure to follow this

procedure can overheat the clutch and

damage the gearbox.

to optimise driving comfort and obtain the

most suitable gear, avoid sharp variations in

the pressure on the accelerator pedal.

If you fully depress the accelerator pedal,

the gearbox changes down for sharper

acceleration.

When moving off on a slope, accelerate

gradually while releasing the parking brake.

Select first gear (move the lever towards +)

or reverse (position R).

"1" or "R" appears in the instrument panel

screen.

Release the parking brake.

Remove your foot from the brake pedal and

then accelerate away.

Gearbox and steering wheel

Temporarily changing gear

in AUTO mode

Sequential mode

Stopping the vehicle

After using the automated mode, you can

return to the sequential mode by selecting

position A/M again.

to switch off the engine, with your foot on

the brake pedal, you should:

You can also request a gear change using

the gear lever.

select first gear or reverse.

this action does not deactivate the

automated mode, but allows temporary

use of the sequential mode functions (for

example: for overtaking another vehicle...).

"AUTO" remains displayed in the instrument

panel screen.

apply the parking brake to immobilise the

vehicle.

"AUTO" disappears and the

gears engaged appear in

succession in the instrument

panel screen.

switch off the ignition.

t is not necessary to take your foot off the

accelerator pedal to change the gear.

the gear change requests are only carried

out if the engine speed permits it. the

system gives an audible signal if a gear

change is not possible.

At low speeds, when approaching a stop

or traffic lights for example, the gearbox

changes down to first gear automatically.

Release the brake pedal after the display

of the gear engaged has disappeared

from the instrument panel screen.

Never leave the vehicle with the

gearbox in neutral (position N). In this

"ECO" economy programme

case, there is an audible signal on switching

off the ignition (ignition key in

the STOP position).

this programme works with the automated

mode to reduce fuel consumption.

Press button E to activate the programme.

"E" appears in the instrument

panel screen, next to "AUTO"

and the gear selected by the

gearbox.

the gearbox then selects the best gear for

the speed of the vehicle, the engine speed

and the accelerator pedal position to reduce

fuel consumption.

Gearbox and steering wheel

In the event of a prolonged stop with

the engine running, it is recommended

that the gearbox be put into neutral

(position N).

Reinitialisation

Operating fault

turn the ignition key to the MAR position.

Within ten seconds, the gear engaged should

appear in the instrument panel screen.

Otherwise, turn the ignition key to the

STOP position and wait until the instrument

panel screen goes off.

the illumination of this warning

lamp, accompanied by a message

in the instrument panel screen,

indicates incorrect use of the

gearbox by the driver.

With the vehicle stationary, the engine

running and first, second or reverse

gear engaged, the gearbox changes to

neutral automatically, accompanied by

an audible signal, in the following

circumstances:

With the ignition on, the flashing this warning

lamp, accompanied by an audible signal and

a message in the instrument panel screen,

indicates a fault with the gearbox.

Have it checked by a PeugeOt dealer or a

qualified workshop.

turn the ignition key to the MAR position

again.

If the problem persist, have the system

checked by a PeugeOt dealer or a

qualified workshop.

no action on the accelerator or brake

pedals for at least 3 minutes,

brake pedal applied for more than

10 minutes,

Back-up mode - Slow move off

Never select neutral N while the vehicle

is moving.

this procedure should be applied if pressing

the brake pedal is not recognised by the

system, or if the gearbox has fault on

starting the engine.

Press the brake pedal firmly.

turn the ignition key to the AVV position for

at least seven seconds.

driver's door opened and no action on the

accelerator or brake pedals for at least

1.5 seconds,

Only engage reverse gear R with the vehicle

immobilised and the brake pedal pressed.

You risk damaging the gearbox if you

press the accelerator and brake pedals

simultaneously.

a gearbox fault.

the engine starts.

the system is in back-up mode; the gearbox

will not go beyond the 3rd gear engaged and

automated mode is not available.

When towing your vehicle, ensure that

the gearbox is in neutral (position N).

When traversing a flooded road or a

ford, drive at walking pace.

If the engine does not start, have the

system checked by a PeugeOt dealer

or a qualified workshop.

READY TO SET OFF -> Electronic Gearbox for Your Peugeot Bipper Van First Generation (2007-2018)

Related Topics

READY TO SET OFF

Popular Owner Manuals

Latest Owner Manuals