READY TO SET OFF -> Key for Your Peugeot Bipper Van First Generation (2007-2018)

Access  
-
-
-
use the screwdriver as a lever to extract  
the battery holder housing 2,  
KEY  
REMOTE CONTROL BATTERY  
this locks and unlocks the doors on the  
vehicle, opens and closes the fuel filler cap,  
as well as starting and stopping the engine.  
Reference: CR 2032/3 volts.  
remove the housing and change the  
battery 3 observing the polarities,  
Changing the remote control  
battery  
put the battery holder housing 2 back  
inside the key and secure it by turning the  
screw 1.  
-
press the button to eject the  
key,  
there is a risk of damage if  
the replacement battery does not  
conform.  
-
turn the screw 1 from the  
closed padlock to the open  
padlock using a screwdriver  
with a thin tip,  
Switching off the engine leads to a loss  
of braking assistance.  
Only use batteries which are identical or of  
an equivalent type to those recommended  
by a PeugeOt dealer. take used batteries  
to an approved collection point.