READY TO SET OFF -> Headlamp Beam Adjustment for Your Peugeot Bipper Van First Generation (2007-2018)

Steering mounted controls  
Guide-me-home lighting  
Headlamp beam  
the temporary maintaining of the dipped  
beam headlamps, after switching off the  
vehicle's ignition, makes the driver's exit  
easier when the light is poor by illuminating  
the space in front of the vehicle.  
You are advised to adjust the height of the  
headlamp beams in accordance with the  
load in your vehicle.  
this function can only be accessed in  
the main beam headlamps and dipped  
headlamps position.  
Foglamps  
Activation  
With the ignition key in the STOP position  
or removed, pull the lighting stalk towards  
the steering wheel within 2 minutes after  
switching off the engine.  
the controls are located in the dashboard  
switch panel.  
Front and rear foglamps  
each time the control is operated, the  
duration for which the lamps will remain  
on is extended by 30 seconds, up to a  
maximum of 210 seconds. Once this period  
of time has elapsed, the lamps switch off  
automatically.  
the front foglamps operate with  
the sidelamps and the dipped  
beam headlamps.  
Press these controls, located  
on the dashboard, several times  
in succession to adjust the  
headlamps.  
the rear foglamps operate with  
the dipped beam headlamps.  
the warning lamp comes on,  
accompanied by a message in the  
screen, the first time the control is  
operated and remains on until the  
function is deactivated automatically.  
An indicator lamp in the screen  
indicates the adjustment position  
selected (0, 1, 2, 3).  
Press one of these controls to switch on the  
lamps.  
the foglamps should only be used in  
fog or when snow is falling.  
In clear weather or in rain, both day and  
night, lit rear fog lamps dazzle and are  
prohibited.  
Do not forget to switch them off when they  
are no longer necessary.  
Deactivation  
Pull the lighting stalk towards the steering  
wheel for more than 2 seconds.  
3