Get Ease of use and comfort -> Fixed rear seat and bench seat Guide for Peugeot Traveller Van First Generation (2016-2026)

Ease of use and comfort

Folding the backrest to the

table position

Fixed rear seat and bench seat

The different levels of equipment and adjustments described hereafter vary according to the

version and the configuration of your vehicle.

F

Put the head restraints into the low position.

Angled head restraints

F

To raise a head restraint, pull it up until it

engages in its notches.

To remove the head restraint, press the

lug A and pull the head restraint upward.

To put it back in place, engage the head

restraint rods in the apertures keeping

them in line with the seat backrest.

To lower it, press on the lug A and on the

head restraint at the same time.

The seat has a backrest that may be fixed or

folding (table position).

The bench seat has a one-piece backrest that

may be fixed or foldable (table position).

F

From the front, raise the handle to release

the backrest.

From the rear, lower the lever to release

the backrest.

F

For more information on the Seat belts,

refer to the corresponding section.

98

Ease of use and comfort

Fully folding a seat, access to row 3 Removing a seat

(example of an individual seat)

F

If your vehicle has the facility, place the

backrest in the table position.

Tip the seat forward.

F

If your vehicle has the facility, place the

backrest in the table position.

3

F

using the handle, release the rear feet then

tip the seat forward.

To return the seat to the normal position,

unfold the seat backwards until the rear

feet engage in their anchorages.

F

Release the front feet using the handles.

Disengage the seat from its anchorages.

Remove the seat by the sliding door in

row 2 or from the rear in row 3.

F

Fold the backrest onto the cushion.

To return the backrest to the normal

position, raise the lever and pull the

backrest up (from the rear, lower the lever).

It is not necessary to fold the backrest

(table position) to tip the bench seat for

access to row 3.

99

Ease of use and comfort

Refitting a seat

If removing and storing a seat (or bench

seat) out of the vehicle, ensure that it is

placed in a clean area, so as to avoid

introducing any foreign bodies into the

mechanisms.

(example of an individual seat)

F

Check that there is no object obstructing

the anchorages and preventing the feet

locking into place.

The seats (or bench seats) are not

designed for any use other than in the

vehicle. They have mechanisms and

functions that could be damaged if used

incorrectly or are if the seat is dropped.

F

If fitted to your vehicle, pull the control to

raise the backrest (from the rear, lower the

lever).

F

engage the front feet in the anchorages on

the floor (as shown above).

Check that the seat has locked into

place on the floor when returning it to

the seating position.

F

Lock the front feet using the handles.

unfold the seat toward the rear until the

rear feet lock into place.

ensure that no object, or the feet of a

passenger seated at the rear, could

obstruct the anchorage points or prevent

the correct latching of the assembly.

Be aware of the feet of passengers when

refitting a seat.

100

Ease of use and comfort -> Fixed rear seat and bench seat for Your Peugeot Traveller Van First Generation (2016-2026)

Related Topics

Ease of use and comfort

Popular Owner Manuals

Latest Owner Manuals