Get Ease of use and comfort -> Rear seat and bench seat on rails Guide for Peugeot Traveller Van First Generation (2016-2026)

Ease of use and comfort

Reclining the backrest

Rear seat and bench seat on rails

The reclining backrest can be adjusted to

several positions.

The different equipment and adjustments

Head restraints

described hereafter vary according to the

version and configuration of your vehicle.

3

F

To raise a head restraint, pull it up until it

engages in its notch.

F

To recline the backrest, raise the control

(from the rear, lower the lever).

Release the control when the desired

position is obtained.

The individual seat is always on the right and

the bench seat on the left (facing forward).

The bench seat has two independent

backrests.

To remove it, press the lug A and pull the

head restraint up.

To refit it, engage the head restraint rods in

the apertures keeping them in line with the

seat backrest.

For more information on the Seat belts,

refer to the corresponding section.

F

To lower it, press on the lug A and on the

head restraint at the same time.

101

Ease of use and comfort

Moving the seat along the full

length of the rail

Moving forward or backward

(example of an individual seat)

Folding the seat backrest to

the table position

(example of an individual seat)

F

Place the head restraints in the low position.

F

Place the seat backrest in the table

position.

Slide the seat by pulling on the rear strap.

F

From the front, raise the handle to release

the backrest.

From the rear, lower the handle to release

the backrest.

Two controls are provided for moving the seat

forwards and backwards:

F

From the front, raise the control and slide

the seat forward or back.

Fold the backrest onto the cushion.

F

From the rear, pull the strap without going

beyond the point of resistance and push

the seat forward or pull it back.

Do not leave objects (such as a bag or

toys) on the cushion when folding the

backrest.

102

Ease of use and comfort

Return the backrest to the normal

position (between the markings)

Removing a seat

(example of an individual seat)

If removing and storing a seat (or bench

seat) out of the vehicle, ensure that it is

placed in a clean area, so as to avoid

introducing any foreign bodies into the

mechanisms.

F

Move the seat forward for access to the strap.

Fold the backrest to the table position.

3

The seats (or bench seats) are not

designed for any use other than in the

vehicle. They have mechanisms and

functions that could be damaged if used

incorrectly or if the seat is dropped.

To return the backrest to the normal position,

the seat must be positioned between the

markings.

The arrow must not be outside the markings.

F

From the rear, pull the strap fully, to release

the anchorages and tip the seat forward to

the vertical position.

Take the seat out through the sliding door

in row 2 or from the rear in row 3.

Do not use the strap to lift the seat or

bench seat.

F

use the front control to move the seat so

that it is between the markings.

103

Ease of use and comfort

(example of an individual seat)

Refitting a seat

F

Check that nothing is obstructing the rails.

F

Slide the seat forward or back until it

engages in the notches.

Straighten the backrest.

Before refitting a seat or bench seat

to the vehicle, pull the strap fully to

ensure that the latching mechanism has

engaged.

Check that seat engages correctly

in the floor when it is returned to the

seating position.

F

Place the front of the guides on the rails.

Tip the seat back to align the rear of the

guides with the rails.

ensure that no object, or the feet of a

passenger seated at the rear, could

obstruct the anchorage points or prevent

the correct latching of the assembly.

Do not use the strap to lift the seat or

bench seat.

104

Ease of use and comfort -> Rear seat and bench seat on rails for Your Peugeot Traveller Van First Generation (2016-2026)

Related Topics

Ease of use and comfort

Popular Owner Manuals

Latest Owner Manuals