Get Ease of use and comfort -> Folding and sliding table Guide for Peugeot Traveller Van First Generation (2016-2026)

Ease of use and comfort

Moving forward or backward

Folding and sliding table

Storage

3

F

Raise this control (without going beyond

the point of resistance) and slide the

assembly forward or backward.

Release the control when it is in the

desired position.

Check that the table is correctly latched on

the runner. If this is not the case, move the

assembly slightly to the next notch on the

runner.

F

It comprises a central storage space closed

with a lid. unfolded, it offers a table with

two tops on which objects can be placed. The

central area includes two cup holders and can

also be used to place small objects (credit card,

pen, ...).

F

Slide back the cover for access to 11 litres

of storage space.

You can move the table folded or

unfolded. However, for greater safety, it

is recommended that the assembly be

moved in the folded position.

The assembly is mounted on a runner allowing it

to be positioned equally well in row 2 or row 3.

For correct sliding of the table, ensure

that there is no object in the space used

by the runner on the floor.

The storage space can accept a

maximum weight of 3 kg; do not exceed

this maximum load in use.

Before manoeuvring the table, check

that there is nothing on the table.

121

Ease of use and comfort

Unfolding

Folding

Cup holders

F

operate the control on the top and pull the

table assembly up until it clicks into place.

Two cups or cans and small objects (such as

a credit card, portable ashtray or pen) can be

carried in the middle of the unfolded table.

F

Raise each table top, going beyond the

point of resistance, to the vertical position.

Push each table top down into its housing

until it clicks into place.

Push the control then tip the table

assembly downward until it clicks into

place.

Before stowing the table tops, check

that there is no object underneath.

Before tipping the assembly down,

check that the two table tops have

clicked home in the low position and

that there is nothing in the cup holder

area (such as a can or pen).

Liquids carried in an open vessel (a cup

or mug) could be spilt, presenting a risk.

Take care.

Never use the table in this position

while the vehicle is being driven.

F

Pull each table top fully up then pivot them

on each side into the horizontal position.

122

Ease of use and comfort

Removing

Changing the direction

Refitting

F

Check that there is no object obstructing

the runner, which could prevent correct

latching.

3

With the table removed, you can turn it 180°.

F

Raise the control fully to release the

anchorages and tip the table assembly

forward.

Remove the table assembly through the

sliding door in row 2.

F

Check that the control is in the up position

(latching mechanism armed). If not, raise

this control fully to arm the mechanism.

Place the front of the table on the runner.

Taking care not to interfere with the control,

tip the assembly down at the rear until it

clicks into place.

F

Check that there is nothing in the space

around the runner on the floor, so that

the table disengages cleanly.

Remove a seat to make this easier.

F

Check that the assembly is correctly

latched on the runner. if this is not the

case, slide the assembly along the runner

to the next notch.

Release the control until the guide latches

in the runner.

123

Ease of use and comfort

Take care of passengers' feet when

manoeuvring the assembly.

Storage off the runner

If removing and storing the table

out of the vehicle, ensure that it is

placed in a clean area, so as to avoid

introducing any foreign bodies into the

mechanisms.

Incorrect use of the table could cause

serious injury.

Never place hot objects such as

casseroles or cooking pans on the

table, you risk damaging its surface

(risk of fire).

The table assembly must be placed on

a flat and level surface when out of the

vehicle, resting on the guide so as to

avoid damaging the visible parts.

Never use the table open or unfolded

while the vehicle is being driven. An

object on the table is turned into a

projectile under heavy braking.

ensure that the table is correctly stowed

in the low position before moving off.

Never use the table tops as seats or

lean on them.

With the table deployed, each top can

support a maximum of 10 kg. Failure to

observe this maximum load introduces

the risk of damaging all or part of the

table module.

A label on the table is a reminder of this.

Never raise the table when it is between

individual seats; this risks damaging the

table tops.

Caution, when out of the vehicle, the

table leans to the right or left when put

down.

124

Ease of use and comfort -> Folding and sliding table for Your Peugeot Traveller Van First Generation (2016-2026)

Related Topics

Ease of use and comfort

Popular Owner Manuals

Latest Owner Manuals