Get Ease of use and comfort -> Individual seat(s) on rails Guide for Peugeot Traveller Van First Generation (2016-2026)

Ease of use and comfort

Armrest(s)

Individual seat(s) on rails

The different equipment and adjustments

described hereafter vary according to the

version and configuration of your vehicle.

Head restraints

3

F

To raise a head restraint, pull it up until it

engages in its notch.

To remove it press the lug A and pull the

head restraint up.

To refit it, engage the head restraint rods in

the apertures keping them in line with the

seat backrest.

The armrest has notches.

The individual seat is fitted with a three-point

inertia reel seat belt.

F

Pull the armrest fully up

Lower it fully down.

Raise the armrest to the desired position.

F

To lower it, press on the lug A and on the

head restraint at the same time.

It can be placed forward facing or

rearward facing.

For more information on the Seat belts,

refer to the corresponding section.

105

Ease of use and comfort

Reclining the backrest

Moving forward or backward Folding the seat backrest to

the table position

The reclining backrest can be adjusted to

several positions.

F

Place the head restraints in the low position.

Two controls are provided for moving the seat

forward and backward:

F

From the front, raise the control and slide

the seat forward or back.

F

To recline the backrest, raise the control

(from the rear, lower the lever).

Release the control when the desired

position is obtained.

F

From the front, raise the handle to release

the backrest.

From the rear, lower the handle to release

the backrest.

F

From the rear, pull the strap without going

beyond the point of resistance and push

the seat forward or pull it back.

Fold the backrest onto the cushion.

106

Ease of use and comfort

Removing a seat

Refitting a seat

If removing and storing a seat out of

the vehicle, ensure that it is placed

in a clean area, so as to avoid

introducing any foreign bodies into the

mechanisms.

F

Move the seat forward for access to the strap.

Fold the backrest to the table position.

3

The seats are not designed for any use

other than in the vehicle. They have

mechanisms and functions that could

be damaged if used incorrectly or are

dropped.

Before refitting a seat to the vehicle,

pull the strap fully to ensure that the

latching mechanism has engaged.

F

From the rear, pull the strap, going

beyond the point of resistance, to free the

anchorages and tip the seat forward to the

vertical position.

Take the seat out through the sliding door

in row 2 or from the rear in row 3.

Do not use the strap to lift seat.

Do not use the strap to lift the seat.

107

Ease of use and comfort

F

Check that nothing is obstructing the rails.

ensure that no object, or the feet of a

passenger seated at the rear, could

obstruct the anchorage points or prevent

the correct latching of the assembly.

F

Slide the seat forward or back until it

engages in the notches.

Straighten the backrest.

Check that seat engages correctly

in the floor when it is returned to the

seating position.

F

Place the front of the guides on the rails.

Tip the seat back to align the rear of the

guides with the rails.

108

Ease of use and comfort

Loading luggage or objects Labels

behind the row 3 seat and

bench seat

Precautions for the

seats and bench

seats

Following the various handling operations:

-

do not remove a head restraint without

storing it and fixing it to a support,

check that the seat belts are always

accessible to the passenger and easy to

fasten,

3

-

a passenger must not take their seat

without adjusting the seat's head restraint

correctly and adjusting and fastening the

seat belt.

If you want to load luggage onto the backrests

in row 3 while in the table position, the

backrests in row 2 must also be in the table

position.

When driving, carrying a passenger is

prohibited:

-

in row 3 if the backrest in front (row 2) is in

the table position.

in row 3 if the seat/bench in front (row 2) is

in the fully folded position.

in rows 2 and 3, in the outer right seat, if

the bench is in the fully folded position,

on the centre seat if the outer right seat is

in the fully folded position.

109

Ease of use and comfort -> Individual seat(s) on rails for Your Peugeot Traveller Van First Generation (2016-2026)

Related Topics

Ease of use and comfort

Popular Owner Manuals

Latest Owner Manuals