CHILD SEATS: fitted using the ISOFIX SYSTEM (3/3)
Fitting diagram
Seat which does not allow a
child seat to be fitted.
²
Child seat fitted using the ISOFIX
mounting
Seat which allows an ISOFIX
child seat to be fitted.
The rear seats are fitted with
an anchorage point which
allows a forward-facing child seat with
ISOFIX universal approval to be at-
tached. The anchoring points are lo-
cated on the passenger seatback for
the front seat and on the bench seat-
back for the rear seats.
Fit the child seat in a rear seat wherever possible.
To install an ISOFIX seat in this seat, unbuckle the seat belt by hand
before engaging the bolts.
For the front passenger seat, the
use of a child seat with a floor sup-
port is recommended to avoid trig-
gering the seat belt warning signal.
Fitting a seat ISOFIX in the rear-left seat means the middle seat cannot
be used. The central seat belt will no longer be either accessible or useable.
Using a child safety system
which is not approved for
this vehicle will not correctly
Check that your child is always strapped in and that the belt or safety har-
ness used is correctly set and adjusted ➥ 1.23. If necessary, adjust the
seat position accordingly.
protect the baby or child.
They risk serious or even fatal injury.
RISK OF DEATH OR SERIOUS INJURY:
before fitting a rear facing child seat on the front passenger seat, check
that the airbag has been deactivated ➥ 1.51
1.50