REAR SCREEN WASHER, WIPER (2/2)
Activation/deactivation of the rear
screen wiper
In the event of obstacles present on the
rear window (dirt, snow, etc.), the wiper
will try to sweep away all the obstacles.
If an obstacle prevents the blade from
moving, it can be stopped. Remove the
obstacle, wait for around 30 seconds
and reactivate the wiper using the wiper
stalk.
Engaging reverse gear triggers inter-
mittent wiping (if the front wipers are in
operation). If your vehicle is equipped
with a vehicle settings customisation
menu, you can opt to activate or deacti-
vate this function. ➥ 1.83.
1
For vehicles not fitted with a settings
customisation menu, you can have this
function deactivated by an authorised
dealer.
Precautions
– In the event of ice, check that the
blades are not stuck to the wind-
screen before operating the wipers.
If you activate the wiper while the
blade is blocked by ice, you risk dam-
aging both the blade and the wiping
motor.
Rear screen wash/wipe
With the ignition on, push and
hold stalk 1, then release.
p
– Do not operate the wipers on a dry
screen. This will lead to the prema-
ture wear or damage to the blades.
Holding the stalk for longer will trigger
(in addition to the windscreen washer)
two sweeps of the wipers followed,
a few seconds later, by a third (drip
wiping function).
When the stalk is released, it returns to
the rear wipe position.
1.107
English 
