TRIP COMPUTER: general information (4/4)
Selections
(the display depends on the vehicle
equipment and country)
Interpreting some of the
values displayed after
resetting
The values showing average fuel con-
sumption, range and average speed
will become more stable and reliable
the further you travel after pressing the
reset button.
a) Trip log, operating faults and infor-
mation message readout;
b) Journey settings:
– average fuel consumption;
– current fuel consumption;
– estimated range with remaining fuel;
– distance travelled;
For the first few miles after pressing
the reset key you will notice that the
range increases as you travel. This
range takes into account the average
fuel consumption since the last time the
reset button was pressed. Therefore,
the average fuel consumption may de-
crease when:
– average speed;
– LPG average fuel consumption;
– estimated range with remaining LPG
fuel;
4
– LPG range;
Resetting the trip mileage
recorder and journey
parameters (reset button)
With one of the trip parameters se-
lected as the display, press and hold
the 4 switch “OK” until the display
resets to zero.
c) trip mileage recorder and average
speed;
– the vehicle stops accelerating;
d) Reset the tyre pressure;
e) set the time;
– the engine reaches its operating
temperature (if the engine was cold
when the reset key was pressed);
f) distance before service;
– distance before service;
– mileage before oil change;
– when driving from an urban area
onto the open road.
Automatic resetting of the
journey parameters
g) Estimated range with remaining rea-
gent.
Resetting occurs automatically when
the maximum value of any of the pa-
rameters is exceeded.
1.74
English 
