FRONT HEADRESTS
To raise the headrest
Raise it to its highest position (tilt the
seatback backwards if necessary).
Press button 2 and lift the headrest to
release it.
A
3
1
To refit the headrest
Check that the headrest rods are
clean 3.
2
Insert the headrest rods into the holes 1
(tilt the seatback backwards if neces-
sary). Lower the headrest until it locks
and press button 2 to adjust to the de-
sired height. Check that each rod 3 on
the seatback is securely locked.
To raise the headrest
Press the 2 button and pull the headrest
upwards to the height required. Check
that the bonnet is correctly locked.
To lower the headrest
Press button 2 and guide the headrest
down to the desired height. Check that
the bonnet is correctly locked.
The headrest is important
for safety. Ensure that it is in
place and in the correct po-
sition: the top of the head-
rest should be as close as possible
to the top of the head and there must
be a minimal distance between the
head and the headrest A.
1.92
English 
