Get Getting to know your vehicle Guide for Renault Scenic 4 Door Fourth Generation (2017-2022)

Section 1: Getting to know your vehicle

Key, radio frequency remote control: general information, use . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

The RENAULT card: general information and use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.2

1.6

Locking, unlocking the opening elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.13

Opening and closing the doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.16

Automatic locking when driving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.18

Steering wheel/Power-assisted steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.19

Headrests - Seats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.20

Seat belts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.29

Additional methods of restraint:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.34

in addition to the front seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

to the rear seat belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

side protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.34

1.40

1.41

Child safety: General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.43

choosing a child seat mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

fitting a child seat, general information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.46

1.49

Child seats: attachment by seat belt or by Isofix system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.51

deactivating-activating the front passenger airbag. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.63

Driving position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.66

Instrument panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.70

trip computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

vehicle settings customisation menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1.82

1.92

Clock and outdoor temperature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.94

Rear view mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.95

Audible and visual signals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.97

Exterior lighting and signals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.98

Headlight beam adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.104

Windscreen wash, wipe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.106

Rear windscreen wash, wiper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.112

Fuel tank (filling with fuel) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.114

Reagent tank. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.117

1.1

KEY, RADIO FREQUENCY REMOTE CONTROL: general information (1/2)

3

2

1

Driver’s responsibility

when parking or stopping

the vehicle

2

1

4

Never leave an animal,

child or adult who is not self-suffi-

cient alone on your vehicle, even for

a short time.

5

They may pose a risk to themselves

or to others by starting the engine,

activating equipment such as the

electric windows or locking the

doors.

1 Locks all the opening elements.

2 Unlocks all the opening elements.

3 Ignition and front door key.

Also, in hot and/or sunny weather,

please remember that the tempera-

ture inside the passenger compart-

ment increases very quickly.

5 Locking/unlocking the tailgate only.

Remote control with switchblade

key:

4 Locking/unlocking using the switch-

blade key. To release the insert from

its housing, press button 4, it comes

out automatically. Press button 4 and

guide the insert back into its housing.

Advice

RISK OF DEATH OR SERIOUS

INJURY.

Avoid leaving the remote control in

hot, cold or humid areas.

The key must not be used for any

function other than those described

in the handbook (removing the cap

from a bottle, etc.).

1.2

KEY, RADIO FREQUENCY REMOTE CONTROL: general information (2/2)

Radio frequency remote

control operating range

This varies according to the surround-

ings: take care not to lock or unlock the

doors by inadvertently pressing the but-

tons on the remote control.

Replacement and additional keys

or remote controls.

Note: If a door or the boot is open or

not closed properly, the doors and boot

lock/unlock in quick succession.

You must only contact an approved

dealer:

– If you need to replace a key it will

be necessary to take the vehicle

and all of its keys to an approved

Dealer in order to initialise the

system.

Interference

Interference by factors in the immediate

vicinity (external installations or the use

of equipment operating on the same

frequency as the remote control) may

affect the operation of the remote con-

trol.

– Depending on the vehicle, you

have the option of using up to

four remote controls.

Remote control unit failure

Make sure that the correct battery

type is being used, and that the

battery is in good condition and in-

serted correctly. These batteries

have a service life of approximately

two years.

Refer to Section 5: “Radio fre-

quency remote control: batteries”

for the battery changing procedure.

1.3

RADIO FREQUENCY REMOTE CONTROL UNIT: use

The remote control A can be used to

lock or unlock the doors and boot.

Note:

A

With the engine running, the ignition

switched on (refer to the information on

“Ignition switch: vehicles with a key” in

Section 2), the remote control buttons

will be inactive.

It is powered by a battery which must

be replaced (refer to the information on

“Radio frequency remote control: bat-

2

teries” in Section 5).

1

2

Locking the doors

Press locking button 1.

The side indicator lights and hazard

warning lights flash twice to indicate

that the doors have been locked.

1

3

If a door or the boot is open or not prop-

erly shut, they will lock and unlock in

quick succession and the hazard warn-

ing lights and side indicator lights will

not flash.

Locking/unlocking only the

boot

Press the button 3.

Unlocking the doors

Pressing button 2 unlocks the doors

and tailgate.

Driver’s responsibility when parking or stopping the vehicle

Never leave an animal, child or adult who is not self-sufficient alone on

your vehicle, even for a short time.

Unlocking is indicated by one flash of

the hazard warning lights and the indi-

cator lights.

They may pose a risk to themselves or to others by starting the engine,

activating equipment such as the electric windows or locking the doors.

Also, in hot and/or sunny weather, please remember that the temperature inside

the passenger compartment increases very quickly.

RISK OF DEATH OR SERIOUS INJURY.

1.4

RADIO FREQUENCY REMOTE CONTROL UNIT: deadlocking

If the vehicle is equipped with a dead-

locking function, this allows you to lock

the opening elements and to prevent

the doors from being unlocked using

the interior handles (for example, by

breaking the window and then trying to

open the door from the inside).

1

To do this, press button 1 twice in quick

succession.

1

The hazard warning lights and side in-

dicator lights give two slow flashes and

three quick flashes to indicate locking.

Special note: deadlocking is not pos-

sible if the hazard warning lights or the

side lights are lit.

Never use deadlocking if

someone is still inside the

vehicle.

1.5

RENAULT CARD: general information (1/2)

The RENAULT card is used

RENAULT card operating

range

for:

1

– locking/unlocking the doors and tail-

gate (doors, tailgate) and the fuel

filler flap (see the following pages);

– switching on the vehicle lighting re-

motely (refer to the following pages);

– automatically closing the electric

windows remotely (see the informa-

tion on “Electric windows” in

Section 3);

This varies according to the environ-

ment: take care not to accidentally lock

or unlock the vehicle by inadvertently

pressing the buttons on the RENAULT

card.

4

2

Note: if a door or the tailgate is open or

not closed properly, the doors and tail-

gate lock then unlock quickly.

3

– starting the engine (see the infor-

mation on “Starting, stopping the

engine” in Section 2).

Interference

Interference by factors in the immediate

vicinity (external installations or the use

of equipment operating on the same

frequency as the RENAULT card) may

disrupt its operation.

1 Unlocking the doors and tailgate.

2 Locking all doors and tailgate.

3 Unlocking/locking the boot.

Battery life

Make sure that the correct battery type

is being used, and that the battery is

in good condition and inserted cor-

rectly. Its service life is approximately

two years: replace it when the mes-

sage “Keycard battery low” appears on

the instrument panel (refer to Section 5

“RENAULT card: battery”).

4 Switching on the lighting remotely.

When the battery is flat, you can

still lock/unlock and start your vehi-

cle. Please see the information on

“Locking and unlocking the doors”

in Chapter 1 and “Starting, stopping

the engine” in Chapter 2.

1.6

RENAULT CARD: general information (2/2)

Advice

4

Avoid leaving the card in hot, cold or

humid areas.

Do not keep the RENAULT card in

a place where it could be bent or

damaged accidentally, such as in a

back pocket of a garment.

Driver’s responsibility

Never leave an animal,

child or adult who is not

self-sufficient alone in your

vehicle, even for a short time.

They may pose a risk to themselves

or to others by starting the engine,

activating equipment such as the

electric windows or locking the

doors, for example.

Distance lighting function

Pressing button 4 switches on the

dipped beam headlights and the interior

lighting for approximately 20 seconds.

This can be used, for example, to iden-

tify your vehicle from a distance when

parked in a car park.

Replacement: need for an

additional RENAULT Card

Also, in hot and/or sunny weather,

please remember that the tempera-

ture inside the passenger compart-

ment increases very quickly.

If you lose your RENAULT card or

require another, you can obtain one

from an approved dealer.

Note: Pressing button 4 again switches

off the lighting.

If a RENAULT card is replaced, it

will be necessary to take the vehi-

cle and all of its RENAULT cards

to an approved dealer to initialise

the system.

RISK OF DEATH OR SERIOUS

INJURY.

You may use up to four RENAULT

cards per vehicle.

1.7

RENAULT “HANDS-FREE” CARD: usage (1/4)

There are two ways to unlock/lock the

vehicle:

–

the RENAULT card in “Hands-free”

mode;

–

the RENAULT card in remote con-

trol mode.

Driver’s responsibility

Never leave an animal,

1

child or adult who is not

self-sufficient alone in your

Using the card in “hands-

free” mode

In “hands-free” mode, it is possible to

lock/unlock the vehicle without using

any of the RENAULT card’s buttons,

as long as the card is within the access

zone 1.

vehicle, even for a short time.

They may pose a risk to themselves

or to others by starting the engine,

activating equipment such as the

electric windows or locking the

doors, for example.

Also, in hot and/or sunny weather,

please remember that the tempera-

ture inside the passenger compart-

ment increases very quickly.

RISK OF DEATH OR SERIOUS

INJURY.

Note: “hands-free” access can be de-

activated from the multimedia screen

(please see the equipment instruc-

tions).

Do not store the RENAULT card

anywhere it may come into con-

tact with other electronic equipment

(computer, phone, etc.) as this could

hinder its operation.

1.8

RENAULT “HANDS-FREE” CARD: usage (2/4)

Note: the distance at which the vehicle

locks depends on the surroundings.

To indicate that the vehicle has been

locked, the hazard warning lights and

indicator lights flash once and then

light up for approximately four sec-

onds, and a beep sounds in confirma-

tion.

4

2

3

“Hands-free” locking using the

sensor 3

If you wish to lock your vehicle while the

card is within range, make sure that the

doors and boot are closed and place

your finger over the sensor 3 on the

driver’s door handle. The vehicle will

lock.

“Hands-free” unlocking

The “hands-free” system may experi-

ence temporary difficulties if one of the

sensors built into the inside of the door

handle is obscured (by dirt, mud, snow,

gritting salt etc.). Clean the sensors. If

there is still a problem, contact an ap-

proved dealer.

With the RENAULT card in zone 1,

place your hand on a door handle 2: the

vehicle will unlock.

Unlocking is indicated by one flash of

the hazard warning lights and the indi-

cator lights.

Note: The sensor cannot be used to

lock the vehicle unless the RENAULT

card is within the access zone 1.

Special features of the locking

system

Having locked the vehicle by pressing

the sensor 3, there is a delay of ap-

proximately three seconds before it can

be unlocked again. During these three

seconds, the door handles can be tried

to make sure that the vehicle is locked

properly.

Pressing the button 4 unlocks the entire

vehicle and releases the boot.

Remote “Hands-free” locking

With the RENAULT card on you, and

doors and boot closed, move away

from the vehicle: it will lock automati-

cally as soon as you leave the access

zone.

1.9

RENAULT “HANDS-FREE” CARD: usage (3/4)

6

Unlocking is indicated by one flash of

the hazard warning lights and the indi-

cator lights.

Locking using the RENAULT card

With the doors and boot closed, press

button 7: the vehicle locks.

The indicator lights and hazard warning

lights flash twice to indicate that the

doors have locked.

7

5

Note: The maximum distance at which

the vehicle locks depends on the sur-

roundings.

Special features

If an opening element (a door or the

luggage compartment) is open or not

properly closed, the vehicle cannot be

locked. The vehicle will lock/unlock in

quick succession, but the hazard warn-

ing lights and the side indicator lights

will not flash.

Particular features of the locking

system (continued)

The vehicle cannot be locked if the card

is within the zone 5.

If a door is open or not properly closed:

– when locking using the sensor 3,

the vehicle will lock/unlock in quick

succession, but the hazard warning

lights and the side indicator lights will

not flash;

If the vehicle is unlocked by pressing

the button on the RENAULT card, but

the doors or boot are not then opened;

remote ”hands-free” locking is disabled.

Using the card as a remote

control

– the vehicle will not lock as you move

away.

If the RENAULT card has been within

range for approximately 15 minutes,

remote locking is disabled.

Unlocking with the card RENAULT

Press button 6.

The card buttons are deactivated

when the engine is running.

1.10

RENAULT “HANDS-FREE” CARD: usage (4/4)

Driver’s responsibility

when parking or stopping

the vehicle

8

5

Never leave an animal,

child or adult who is not self-suffi-

cient alone in your vehicle, even for

a short time.

They may pose a risk to themselves

or to others by starting the engine,

activating equipment such as the

electric windows or locking the

doors, for example.

If, while the engine is running, a door

Locking/unlocking only the

boot

Press the button 8 to lock/unlock the

is opened and closed, and the card is

no longer in the zone 5, the message

“Keycard not detected” indicates that

the card is not inside the vehicle. This

will, for example, prevent you from driv-

ing away after dropping off a passenger

who has kept the card on them.

boot only.

Also, in hot and/or sunny weather,

please remember that the tempera-

ture inside the passenger compart-

ment increases very quickly.

The warning disappears when the card

is detected again.

RISK OF DEATH OR SERIOUS

INJURY.

1.11

RENAULT CARD: deadlocking

If the vehicle is equipped with a dead-

locking function, this allows you to lock

the opening elements and to prevent

the doors from being unlocked using

the interior handles (for example, by

breaking the window and then trying to

open the door from the inside).

1

To do this, press button 1 twice in quick

succession.

The hazard warning lights and side in-

dicator lights give two slow flashes and

three quick flashes to indicate locking.

Special note: deadlocking is not pos-

sible if the hazard warning lights or the

side lights are lit.

Never use deadlocking if

someone is still inside the

vehicle.

1.12

LOCKING, UNLOCKING THE DOORS (1/3)

If the remote control or,

depending on the vehicle, the

RENAULT card does not work

2

1

In some cases, the radio frequency

remote control or the RENAULT card

may not work:

A

– RENAULT card/radio frequency

remote control battery worn or run

flat, vehicle battery flat, etc.

– use of appliances operating on the

same frequency as the card (mobile

phone, etc.);

– vehicle located in a high electromag-

netic radiation zone.

It is then possible:

The card’s built-in key

The built-in key 2 is used to lock or

unlock the front left-hand door if the

RENAULT card is not working.

– depending on the vehicle, use the

radio frequency remote control or

the emergency key integrated in the

card to unlock the front left-hand

door;

– to lock each of the doors manually;

– to use the interior door locking/un-

locking control (refer to the following

pages).

Access with key 2

Slide the rear casing 1 downwards

while pressing on zone A.

1.13

LOCKING, UNLOCKING THE DOORS (2/3)

6

4

B

3

5

2

Using the key integrated in the

RENAULT card

Vehicles with key/remote

control

Locking the doors manually

Turn screw 6 with the door open (using

the end of the key) and close the door.

– Insert the tip of the key 2 into the

notch 3 at the bottom of the cover B

on the front left-hand door;

– Move it upwards to remove the

cover B;

– Insert the key 2 into the lock and lock

or unlock the front left-hand door.

Using the key

This means that the doors are then

locked from the outside.

Insert the key 5 into the lock 4 and lock

or unlock the front left-hand door.

The doors may then only be opened

from the inside or by using the key in

the front left-hand door.

Once you are inside the vehicle, put the

key back in its casing in the RENAULT

card.

1.14

LOCKING, UNLOCKING THE DOORS (3/3)

Locking the opening

Door and tailgate status

indicator

elements without the

RENAULT card or the key

For example, in the event of a dis-

charged battery or the RENAULT card

or key temporarily not working, etc.

When the ignition is on, the indicator

light integrated in switch 7 informs you

of the status of the doors and tailgate:

– indicator light on, the doors and tail-

gate are locked;

With the engine switched off and a

door or tailgate open, press and hold

switch 7 for more than five seconds.

– indicator light off, the doors and tail-

gate are unlocked.

7

When the door is closed, all the doors

and the tailgate will be locked.

When you lock the doors from the out-

side, the indicator light remains lit for a

moment, and then goes out.

Unlocking the vehicle from the outside

is only possible with the RENAULT card

in the vehicle’s access zone or using

the key.

Interior locking/unlocking

door control

Switch 7 controls the doors, the boot

and the fuel filler flap simultaneously.

Never leave your vehicle

with the key or RENAULT

card inside.

If a door or the tailgate is open or not

closed properly, the doors and tailgate

lock/unlock quickly.

If transporting an object with the tail-

gate open, you can still lock the doors:

with the engine stopped, press and

hold switch 7 for more than five sec-

onds to lock the other doors.

Driver’s responsibility

If you decide to keep the

doors locked when you are

driving, remember that it

may be more difficult for those as-

sisting you to gain access to the

passenger compartment in the

event of an emergency.

1.15

OPENING AND CLOSING THE DOORS (1/2)

4

2

3

1

Opening the doors from the

outside

With the doors unlocked or RENAULT

card on you, hold handle 1 and pull it

towards you.

Opening from the inside

Pull on the handle 2.

Door/tailgate open buzzer

At a standstill, warning light 3 lights

up on the instrument panel alongside

warning light 4, indicating the opening

element(s) (door, boot) open or incor-

rectly closed.

Lights-on reminder buzzer

If you have switched off the ignition

and left the lights switched on, a remin-

der buzzer will sound when a door is

opened while the light stalk is not in po-

sition AUTO.

Once the vehicle reaches a speed of

approximately 12 mph (20 km/h), a

warning light indicates if the door(s) or

luggage compartment are open or im-

properly closed, along with the mes-

sage “Boot open” or “Door open” and a

beep will sound for around 40 seconds

or until the door/luggage compartment

is closed.

As a safety precaution,

the doors should only be

opened or closed when the

vehicle is stationary.

1.16

OPENING AND CLOSING THE DOORS (2/2)

Driver’s responsibility

when parking or stopping

the vehicle

5

Never leave an animal,

child or adult who is not self-suffi-

cient alone on your vehicle, even for

a short time.

They may pose a risk to themselves

or to others by starting the engine,

activating equipment such as the

electric windows or locking the

doors.

Child safety

Move lever 5 and check from the inside

that the doors are securely locked, to

prevent the rear doors being opened

from the inside.

Also, in hot and/or sunny weather,

please remember that the tempera-

ture inside the passenger compart-

ment increases very quickly.

RISK OF DEATH OR SERIOUS

INJURY.

1.17

AUTOMATIC LOCKING WHEN DRIVING

Activating/deactivating the

Operating faults

function

If you experience an operating fault (no

automatic locking, the indicator light in-

corporated in switch 2 does not light up

when trying to lock the doors and boot,

etc.), make sure that locking has not

been deactivated by mistake and check

that the doors and boot are properly

closed. If they are correctly locked and

the fault is still present, contact an au-

thorised dealer.

To switch it on: with the vehicle at a

standstill and the engine running, press

switch 2 until a beep sounds.

To deactivate: with the vehicle station-

ary and the engine running, press the

switch 2 until you hear two beeps.

You can also deactivate/activate the

function from the menu on the multi-

function screen 1 (refer to the informa-

tion on the “Vehicle settings customisa-

tion menu” section 1, “Auto door locking

while driving” function).

1

2

Operating principle

After the vehicle is started, the system

automatically locks the doors when you

are driving at approximately 6 mph

(10 km/h) and over.

The door can be unlocked:

–

by pressing central door unlocking

switch 2.

–

at a standstill, by opening a front

door from inside the vehicle.

Driver’s responsibility

Note: if a door is opened or closed, it

will automatically lock again when the

vehicle reaches a speed of 6 mph

(10 km/h).

If you decide to keep the

doors locked when you are

driving, remember that it

may be more difficult for those as-

sisting you to gain access to the

passenger compartment in the

event of an emergency.

1.18

STEERING WHEEL/POWER-ASSISTED STEERING

Power-assisted steering

NB: power-assisted steering depends

on the mode selected in the “Multi-

Sense” menu (please refer to the infor-

mation in “Multi-Sense” in Section 3).

Variable power-assisted steering

The variable power assisted steering

system is equipped with an electronic

control system which alters the level of

assistance to suit the vehicle speed.

Steering is made easier during parking

manoeuvres (for added comfort) while

the force needed to steer increases

progressively as the speed rises (for

enhanced safety at high speeds).

1

Special feature of Stop and Start

With the engine on standby, power-

assisted steering is no longer opera-

tional. In this case, it returns to its origi-

nal state when the engine is restarted

or when the speed exceeds 1 mph

(1 km/h) (hill, slope etc.).

Adjusting the steering wheel

height and depth

Lower the lever 1 and position the

steering wheel in the required position.

Then, raise the lever fully, beyond the

point of resistance to lock the steering

wheel.

Make sure that the steering wheel is

correctly locked.

Never leave the steering wheel at

full lock while stationary.

With the engine switched off, or if

there is a system fault, it is still pos-

sible to turn the steering wheel. The

force required will be greater.

For safety reasons, only

adjust the steering wheel

when the vehicle is station-

ary.

1.19

FRONT HEADRESTS

A

To adjust side supports B

Depending on the vehicle, sections B

can be adjusted independently to the

desired position.

B

3

To remove the headrest

Raise it to its highest position (tilt the

seatback backwards if necessary).

Press button 2 and lift the headrest to

release it.

1

2

To refit the headrest

Check that the headrest rods are

clean 3.

Insert the headrest rods into the holes 1

(tilt the seatback backwards if neces-

sary).

Lower the headrest until it locks, press

button 2 and lower the headrest as far

as it will go.

To raise the headrest

Pull the headrest upwards to the de-

sired height.

To lower the headrest

Press button 2 and guide the headrest

down to the desired height.

Check that the headrest is properly

locked in place.

The headrest is an impor-

tant safety component:

ensure that it is in place and

To adjust the angle of the

headrest

Depending on the vehicle, move sec-

tion A towards or away from you to the

required position.

in the correct position. The

distance between your head and the

headrest and the distance between

the head and section A should be

as small as possible.

1.20

FRONT SEATS WITH MANUAL CONTROL (1/3)

To tilt the seatback

Lift handle 3 and tilt the seatback to the

desired position. Release the handle at

the desired position and make sure that

it is locked.

2

1

3

Settings

To move the seat forwards or back

For safety reasons, make

these adjustments only

when the vehicle is station-

ary.

Lift and hold the handle 1 to unlock the

seat. Release the handle at the desired

position and make sure that it is locked.

To raise or lower the seat base

We would advise you not to recline

the seatbacks too far to ensure that

the effectiveness of the seat belts is

not reduced.

Move the lever 2 as many times as nec-

essary upwards or downwards until the

required position is reached.

Nothing should be placed on the

floor (area in front of driver) as such

objects may slide under the pedal

during braking manoeuvres, thus

obstructing its use.

1.21

FRONT SEATS WITH MANUAL CONTROL (2/3)

5

4

To adjust the seat’s lumbar position

Heated seats

Lower handle 4 to increase the support

With the ignition on:

and lift it to decrease it.

– pressing the switch 5 on the required

seat for the first time activates the

heating system at maximum power.

Both integrated switch warning lights

come on;

– a second press decreases the heat-

ing to minimum power. One inte-

grated warning light comes on;

– pressing for the third time turns the

heating off.

For safety reasons, carry

out any adjustments when

the vehicle is not being

driven.

1.22

FRONT SEATS WITH MANUAL CONTROL (3/3)

When using the passenger seat in table

position, you must not use the two rear

seats immediately behind it.

Repositioning the seat

Make sure that nothing prevents the

seat from moving.

It is essential to pull the handle 7 to

raise the seatback. Ensure it is cor-

rectly locked in place.

7

Be sure to hold the seat-

back when placing the seat

in table position.

Risk of injury.

Table function

When the front seat is in

table position, the front pas-

senger airbag airbag must

be deactivated (see the in-

formation on “Child safety: activat-

ing/deactivating the front passenger

airbag” in Section 1).

Depending on the vehicle, the passen-

ger seatback may be folded down onto

the seat base to create a table.

– Lower the headrest;

– move the seat back;

– lower the seat base fully;

– pull the handle 7 and fully lower the

seatback.

Risk of serious injury caused by

items resting on the seatback table

which may be dislodged when the

airbagairbag is deployed.

The label (on the dashboard) and

the markings (on the windscreen)

remind you of these instructions.

For your safety, attach any

transported objects when

the seat is in the table po-

sition.

For safety reasons, carry

out any adjustments when

the vehicle is not being

driven.

1.23

DRIVER’S SEAT WITH ELECTRIC CONTROLS (1/2)

Adjusting the seatback

To tilt the seatback, move the top of

switch 2 forwards or backwards.

Adjusting the lumbar support

on the seat

Move the switch 3 forwards, back-

wards, up or down.

2

1

3

For safety reasons, carry

out any adjustments when

the vehicle is not being

driven.

On equipped vehicles, switch 1 grants

access to the seats menu on the multi-

function screen (please refer to the fol-

lowing pages).

Make sure that the seatbacks are

correctly locked in place.

We would advise you not to recline

the seatbacks too far to ensure that

the effectiveness of the seat belts is

not reduced.

No object should be placed on the

floor (in front of the driver). such

objects may slide under the pedals

during sudden braking manoeuvres

and obstruct their use.

Make sure that the seat-

backs are correctly locked

in place.

1.24

DRIVER’S SEAT WITH ELECTRIC CONTROLS (2/2)

Heated seats

With the ignition on:

– pressing the switch 6 on the rele-

vant seat for the first time activates

the heating system on high. Both in-

tegrated switch warning lights come

on. The system automatically de-

cides whether or not the heating is

needed;

4

6

– pressing the switch for the second

time changes the heating to low. One

integrated warning light comes on;

5

– pressing for the third time turns the

heating off.

Adjusting the seat position

To move the seat forwards or back

Move switch 4 forwards or backwards.

Adjusting the seat length

Lift handle 5 to unlock. Release the

handle at the desired position and

make sure that it is locked.

Operating faults

When an operating fault is detected,

the warning lights in the switch 6 for

the seat concerned flash or, depending

on the vehicle, switch off after approxi-

mately five seconds.

To raise or lower the seat base

Move the back of switch 4 up or down.

To tilt the seat base

(depending on the vehicle)

Move the front of switch 4 upwards or

downwards.

Consult an approved dealer

1.25

FRONT SEATS: Functions (1/3)

Browse menu “Driver” or “Passenger”

to:

Massage

Driver

Passenger

– select the type of massage (Tonic,

Relaxing or Lumbar);

Massage

ON

– adjust the intensity (+ or -);

– adjust the speed (+ or -);

Lumbar

Relaxing

Tonic

1

– reset the selected settings. Press 2

then “Reset”;

Intensity

– activate/deactivate the massage

seat (ON or OFF).

Speed

Note:

2

– the duration of the massage is ap-

proximately ten minutes. Then the

function is disabled automatically

(back in OFF position);

Using the multifunction screen, de-

pending on the vehicle you can access

a number of seat functions.

Massage

You can activate the driver and front

passenger seat massage function.

– the mode that you select in the

“Multi-Sense” menu may affect the

massage configuration (please refer

to the information on “Multi-Sense” in

Section 3);

On equipped vehicles, the switch 1 per-

mits direct access to the “Seats” menu

on the multifunction screen.

Using the multifunction screen,

select menu “Vehicle”, “Seats” then

“Massage”.

Please refer to the multimedia equip-

ment instructions for further informa-

tion.

– with the engine switched off, the

massage function will run just once.

1.26

FRONT SEATS: Functions (2/3)

Easy driver and passenger access

Press “ON” or “OFF” to activate or de-

activate this function.

Easy access driver

ON

Easy access passenger

ON

When this function is activated, the seat

moves backwards automatically as the

driver or passenger leaves the vehicle.

Courtesy for passenger

OFF

Position

3

The passenger seat returns to its origi-

nal position when the door is closed.

The driver’s seat returns to its origi-

nal position when you press the start

button with the door closed.

4

5

2

Courtesy for passenger

Settings

Press “ON” or “OFF” to activate or de-

activate this function.

Using the multifunction screen, select

menu “Vehicle”, “Seats” then “Settings”.

When this function is activated, the

driver can adjust the passenger seat

using switches 3, 4 and 5.

You can activate or deactivate the fol-

lowing elements:

– easy driver access;

– easy passenger access;

– Courtesy for passenger;

– visual feedback of current move-

ment.

1.27

FRONT SEATS: Functions (3/3)

Position

Visual feedback

It is possible to store the driving posi-

tion of the driver seat.

ON

3

The driving position includes all the

electric settings for the seat base and

seatback.

The driving position can be stored and

recalled by pressing the buttons:

3

– RENAULT hands-free card detected;

– when the driver’s door is opened.

4

Recall

Save

5

Storing your driving position

– Adjust the driver seat using

switches 3, 4 and 5 (refer to previous

page);

– from the multifunction screen, select

menu “Vehicle”, “Seats”, “Settings”

then “Position” and select “Save”.

Recalling the driving position

With the vehicle at a standstill, using

the multifunction screen, select menu

“Vehicle”, “Seats”, “Settings” then

“Position”, select “Recall” and confirm.

Note: recall of the saved driving po-

sition is interrupted if one of the seat

adjustment buttons is pressed during

recall.

The position of the driver is then stored.

When driving, it is not possible to

recall a driving position.

For safety reasons, carry

out any adjustments when

the vehicle is stationary.

1.28

SEAT BELTS (1/4)

Always wear your seat belt when trav-

elling in your vehicle. You must also

comply with the legislation of the par-

ticular country you are in.

Adjusting your driving

position

– Sit well back in your seat (having

first removed your coat or jacket).

This is essential to ensure your back

is positioned correctly;

Before starting, first adjust your driv-

ing position, then ask all occupants

to adjust their seat belts to ensure

optimum protection.

– adjust the distance between the

seat and the pedals. Your seat

should be as far back as possible

while still allowing you to depress

the clutch pedal fully. The seatback

should be adjusted so that your arms

are slightly bent when you hold the

steering wheel;

– adjust the position of your head-

rest. For maximum safety, your head

must be as close as possible to the

headrest;

Seat belts which are incor-

rectly adjusted or twisted

may cause injuries in the

event of an accident.

– adjust the height of the seat. This

adjustment allows you to select the

seat position which offers you the

best possible view;

Use one seat belt per person,

whether child or adult.

– adjust the position of the steering

wheel.

Even pregnant women should wear

a seat belt. In this case, ensure that

the lap belt is not exerting too much

pressure on the abdomen, but do

not allow any slack.

1.29

SEAT BELTS (2/4)

Locking

Unwind the belt slowly and smoothly

and ensure that buckle 3 locks into

catch 5 (check that it is locked by pull-

ing on buckle 3).

If the belt jams, allow it to return slightly

before attempting to unwind it again.

1

2

If your seat belt is completely jammed,

pull slowly, but firmly, so that just over

3 cm unwinds. Allow it to return slightly

before attempting to unwind it again.

4

5

3

If there is still a problem, contact an ap-

proved dealer.

5

Adjusting the seat belts

Sit with your back firmly against the

seatback.

Unfastening

Press button 4 and the seat belt will be

rewound by the inertia reel. Guide the

belt.

Shoulder strap 1 should be as close as

possible to the base of the neck but not

on it.

Lap belt 2 should be worn flat over the

thighs and against the pelvis.

The belt should be worn so that it is

as close as possible to your body, ie.:

avoid wearing heavy clothing or keep-

ing bulky objects under the belts, etc.

1.30

SEAT BELTS (3/4)

Driver’s seat belt reminder

and, depending on the vehi-

cle, front passenger seat belt re-

minder

Always make sure that the rear passen-

gers are properly fastened in and that

the number of seat belts indicated cor-

responds to the number of rear seats

occupied.

ß

It illuminates on the interior mirror or,

depending on the vehicle, on the cen-

tral display when the engine is started

and if the driver or front passenger seat

belt is not fastened (when the seat is

occupied). If one of these seat belts is

not fastened while the vehicle is moving

at a speed over 12 mph (20 km/h), the

warning flashes and an audible warning

sounds during 120 seconds.

Note: an object placed on one of the

front seat bases may activate the warn-

ing light in some cases.

6

Note: an object placed on the passen-

ger seat base may activate the warning

light in some cases.

playback of 6 graphic:

– indicator green: seatbelt fastened;

– indicator red: seatbelt unfastened;

– indicator grey: seat not occupied.

Rear seat belt reminder (depending

on vehicle)

The

ß

warning light illuminates on

When a rear seat belt is or becomes

unfastened while the vehicle is moving

at a speed over 12 mph (20 km/h), the

warning light flashes and an audible

warning sounds for approximately 30

or 120 seconds (depending on the ve-

hicle).

the instrument panel when the engine

is started. Depending on the vehicle, it

may be accompanied by the 6 graphic

indicating the fastening status of each

of the rear seat belts upon each:

– starting the vehicle;

– opening a door;

– fastening or unfastening of a rear

seat belt.

1.31

SEAT BELTS (4/4)

7

– No modification may be made to the component parts of the originally

fitted restraint system: belts, seats and their mountings. For special op-

erations (e.g. fitting child seats) contact an authorised dealer.

– Do not use devices which allow any slack in the belts (e.g. clothes

pegs, clips, etc.): a seat belt which is worn too loosely may cause injury in the

event of an accident.

– Never wear the shoulder strap under your arm or behind your back.

– Never use the same belt for more than one person and never hold a baby or

child on your lap with your seat belt around them.

– The belt should never be twisted.

– Following an accident, have the seat belts checked and replaced if necessary.

Always replace your seat belts as soon as they show any signs of wear.

Adjusting the height of the

front seat belts

Use button 7 to adjust the seat belt

height so that the shoulder strap is worn

as shown previously. Press the button 7

and raise or lower the seat belt. Make

sure that the seat belt is locked in posi-

tion correctly after you have adjusted it.

– Make sure that the buckle is inserted into the appropriate catch.

– Ensure that no objects are placed in the area around the seat belt catch as

they could prevent it from being properly secured.

– When the rear seats are being put back, make sure that the seat belts and

buckles are correctly positioned so that they can be used properly.

– Make sure the seat belt catch is properly positioned (it should not be hidden

away, crushed or flattened by people or objects).

The following information applies

to the vehicle’s front and rear seat

belts.

1.32

REAR SEAT BELTS

4

5

B

A

C

10

1

9

2

11

6

3

8

7

12

Second row rear side seats

Slowly unwind belt 1.

Second row centre rear seat

Unwind belt 5 slowly from its housing 4.

Click buckle 9 into black catch 8.

Third row rear seats (7-seater

versions)

Slowly unwind the strap 10.

Click the sliding buckle 2 into the corre-

sponding red catch 3.

Click the buckle 11 into the correspond-

ing black catch 12.

Snap the last sliding buckle 6 into the

red catch 7.

To store away the seat belt, guide it into

housing 4 and store the two buckles

into their respective housings A and B

or, depending on the vehicle, hook

buckle 9 on magnet C.

Check that the rear seat

belts are positioned and op-

erating correctly each time

the rear seats are moved.

Rear seat functions

Refer to the information on “Rear

seat functions” in Section 3.

1.33

METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (1/6)

Depending on the vehicle, they are

composed of:

– seat belt inertia reel pretension-

ers;

– Have the entire restraint

system checked following

an accident.

– No operation whatso-

ever is permitted on any part

of the system (pretensioners,

airbags, computers, wiring) and

the system components must not

be reused on any other vehicle,

even if identical.

– central seat belt pretensioners;

– chest-level load limiter;

– airbags – Driver and passenger

front

These systems are designed to act in-

dependently or together when the vehi-

cle is subjected to a frontal impact.

– Only qualified personnel from our

Network may work on the airbags;

otherwise the system may trigger

accidentally and cause injury.

2

Depending on the severity of the

impact, the system can trigger:

1

– seat belt locking;

– The electric trigger system may

only be tested by a specially

trained technician using special

equipment.

Pretensioners

– the seat belt inertia reel pretensioner

(which engages to correct seat belt

slack);

The pretensioners hold the seat belt

against the body, holding the occupant

more securely against the seat, thus in-

creasing the seat belt’s efficiency.

– When the vehicle is scrapped,

contact an approved dealer for

disposal of the pretensioner and

airbags gas generators.

– the lap belt pretensioners to hold the

occupant in his seat;

In the event of a severe frontal impact

and if the ignition is switched on, the

system may engage the following de-

pending on the force of the impact:

– the front airbag.

– the seat belt inertia reel preten-

sioner 1 which instantly retracts the

seat belt;

– the lap pretensioner 2 on the front

seats.

1.34

METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (2/6)

Load limiter

driver and passenger front

Airbags

Fitted to the driver and passenger

sides.

Above a certain severity of impact, this

mechanism is used to limit the force of

the belt against the body so that it is at

an acceptable level.

The presence of this equipment is indi-

cated by the word “airbag” on the steer-

ing wheel, dashboard (in the area of the

airbag A) and, depending on the vehi-

cle, a label on the lower section of the

windscreen.

A

Each airbag system consists of:

– an airbag and gas generator fitted on

the steering wheel for the driver and

in the dashboard for the passenger;

– an electronic unit for system monitor-

ing which controls the gas generator

electrical trigger system;

– remote sensors;

– a single

å

warning light on the

The airbag system uses py-

rotechnic principles. This

explains why, when the

instrument panel.

airbag inflates, it will gener-

ate heat, produce smoke (this does

not mean that a fire is about to start)

and make a banging noise. In a situ-

ation where an airbag is required, it

will inflate immediately and this may

cause some minor, superficial graz-

ing to the skin or other problems.

1.35

METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (3/6)

Operating faults

å

This warning light comes on

when the engine is started and then

goes out after approximately three sec-

onds.

If it does not come on when the ignition

is switched on or if it stays on, there is a

fault in the system.

Contact your approved Dealer as soon

as possible.

Your protection will be reduced until this

fault is rectified.

Operation

This system is only operational when

the ignition is switched on.

In a severe frontal impact, the airbags

inflate rapidly, cushioning the impact

of the driver's head and chest against

the steering wheel and of the front pas-

senger against the dashboard. The air

bags then deflate immediately so that

the passengers are not in any way hin-

dered from leaving the vehicle.

1.36

METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (4/6)

The following conditions will trigger

the pretensioners or airbags.

In a frontal impact with another vehi-

cle of an equivalent or higher category,

with an impact area equal to or greater

than 40%, where the speed of both ve-

hicles is equal to or greater than 25 mph

(40 km/h).

In a side impact with another vehicle

of an equivalent or higher category, at

an impact speed equal to or greater

than 31 mph (50 km/h).

In a frontal impact against a rigid

(non-deformable) surface at an impact

speed equal to or greater than 16 mph

(25 km/h).

1.37

METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (5/6)

In the following examples, the pre-

tensioners or the airbags could op-

erate:

In the following examples, there is a

risk that pretensioners orairbags may

not be triggered:

– side impact to the front or rear of the

vehicle;

– frontal impact, under the tail of a

lorry;

– impact under vehicle such as pave-

ment;

– rear impact, however severe;

– the vehicle overturning;

– frontal impact against an obstacle

with a sharp angle;

– potholes;

– a fall or a hard landing;

– stones;

– ...

1.38

METHODS OF RESTRAINT IN ADDITION TO THE FRONT SEAT BELTS (6/6)

All of the warnings below are given so that the airbag is not obstructed in any way when it is inflated and also to prevent

the risk of serious injuries caused by items which may be dislodged when it inflates.

Warnings concerning the driver’s airbag

– Do not modify the steering wheel or the steering wheel boss.

– Do not cover the steering wheel boss under any circumstances.

– Do not attach any objects (badge, logo, clock, telephone holder, etc.) to the steering wheel boss.

– The steering wheel must not be removed (except by qualified personnel from our Network).

– Do not sit too close to the steering wheel when driving: Sit with your arms slightly bent (see the information on “Adjusting

your driving position” in Section 1). This will allow sufficient space for the air bag to deploy correctly and to be fully effective.

Warnings concerning the passenger airbag

– Do not attach or glue any objects (badge, logo, clock, telephone holder, etc.) to the dashboard on or near the airbag.

– Do not place anything between the dashboard and the passenger (pet, umbrella, walking stick, parcels, etc.).

– The passenger must not put his or her feet on the dashboard or seat as there is a risk that serious injuries may be sustained.

In general, parts of the body should be kept away from the dashboard (knees, hands, head, etc.)

– The devices in addition to the front passenger seat belt should be reactivated as soon as a child seat is removed, to ensure

the protection of the passenger in the event of an impact.

A REAR-FACING CHILD SEAT MUST NOT BE FITTED TO THE FRONT PASSENGER SEAT UNLESS

THE ADDITIONAL RESTRAINT SYSTEMS, I.E. THE PASSENGER AIR BAG, ARE DEACTIVATED.

(refer to the information on “Child safety: deactivating/activating the front passenger airbag” in Section 1)

1.39

METHODS OF RESTRAINT IN ADDITION TO THE REAR SEAT BELTS

Force limiter

It is fitted to the rear side seats in the

second row.

Above a certain severity of impact, this

mechanism is used to limit the force of

the belt against the body so that it is at

an acceptable level.

– Have the entire restraint

system checked following

an accident.

– No operation whatsoever

is permitted on any part of the

system (airbags, electronic units,

wiring) and the system compo-

nents must not be reused on any

other vehicle, even if identical.

– Only qualified personnel from our

Network may work on the airbags;

otherwise the system may trigger

accidentally and cause injury.

1.40

SIDE PROTECTION DEVICES

Side Airbags

This airbag is fitted to the front seats,

activated at the sides of the seats (door

side) to protect the occupants in the

event of a severe side impact.

Curtain Airbags

These are airbag fitted along the sides

of the vehicle in the ceiling which trigger

along the front and rear door side win-

dows to protect the passengers in case

of a severe side impact.

Warning relating to the side airbag

–Fitting seat covers: seats equipped with an airbag require covers spe-

cifically designed for your vehicle. Contact an approved dealer to find

out if these covers are available. The use of any covers other than those

designed for your vehicle (including those designed for another vehicle) may

affect the operation of the airbags and reduce your protection.

– In the front, do not place any accessories, objects or even pets between the

seatback, the door and the internal fittings. Do not cover the seatback with ob-

jects such as clothes or accessories. This may prevent the airbag from operat-

ing correctly or cause injury when the airbag is deployed.

Depending on the vehicle, a mark-

ing on the windscreen informs you

of the presence of additional means

of restraint (airbags, pretensioners

etc.) in the passenger compartment.

– No work or modification whatsoever may be carried out on the seat or internal

fittings, except by qualified personnel from an approved dealer.

1.41

ADDITIONAL METHODS OF RESTRAINT

All of the warnings below are given so that the airbag is not obstructed in any way when it is inflated and also to prevent

the risk of serious injuries caused by items which may be dislodged when it inflates.

The airbag is designed to complement the action of the seat belt. Both the airbag and the seat belt are integral parts

of the same protection system. It is therefore essential to wear seat belts at all times. If seat belts are not worn, the oc-

cupants are exposed to the risk of serious injury in the event of an accident. It may also increase the risk of minor su-

perficial injuries occurring when the airbag is deployed, although such minor injuries are always possible with airbags.

If the vehicle should overturn or in the event of a rear impact, however severe, the pretensioners and airbags are not always

triggered. Impacts to the underside of the vehicle, e.g. from pavements, potholes or stones, can all trigger these systems.

– No work or modification whatsoever may be carried out on any part of the airbag system (airbags, pretensioners, computer,

wiring harness, etc.), except by qualified Network personnel.

– To ensure that the system is in good working order and to avoid accidental triggering of the system which may cause injury,

only qualified Network personnel may work on the airbag system.

– As a safety precaution, have the airbag system checked if your vehicle has been involved in an accident, or is stolen or

broken into.

– When selling or lending the vehicle, inform the user of these points and hand over this handbook with the vehicle.

– When scrapping your vehicle, contact your approved Dealer for disposal of the gas generator(s).

1.42

CHILD SAFETY: General information (1/2)

Carrying children

Please ensure that you comply with the

legislation of your country.

Children, and adults, must be correctly

seated and strapped in for all journeys.

The children being carried in your vehi-

cle are your responsibility.

Driver’s responsibility

when parking or stopping

the vehicle

A child is not a miniature adult. Children

are at risk of specific injuries as their

muscles and bones have not yet fin-

ished growing. The seat belt alone

would not provide suitable protection.

Use an approved child seat and ensure

you use it correctly.

Never leave an animal,

child or adult who is not self-suffi-

cient alone on your vehicle, even for

a short time.

They may pose a risk to themselves

or to others by starting the engine,

activating equipment such as the

electric windows or by locking the

doors.

A collision at 30 mph

(50 km/h) is the same as fall-

ing a distance of 10 metres.

Transporting a child without

Also, in hot and/or sunny weather,

please remember that the tempera-

ture inside the passenger compart-

ment increases very quickly.

a restraint is the equivalent of allow-

ing him or her to play on a fourth-

floor balcony without railings.

Never travel with a child held in your

arms. In the event of an accident,

you will not be able to keep hold of

the child, even if you yourself are

wearing a seat belt.

RISK OF DEATH OR SERIOUS

INJURY.

To prevent the doors being

opened, use the “Child

safety” device (refer to the

information on “Opening

and closing the doors” in Section 1).

If your vehicle has been involved in

a road accident, replace the child

seat and have the seat belts and

ISOFIX anchorage points checked.

1.43

CHILD SAFETY: General information (2/2)

Using a child seat

Set a good example by always fas-

tening your seat belt and teaching

your child:

– to strap themselves in correctly;

– to always get in and out of the car

at the kerb, away from busy traf-

fic.

The level of protection offered by the

child seat depends on its ability to re-

strain your child and on its installation.

Incorrect installation compromises the

protection it offers the child in the event

of harsh braking or an impact.

Before purchasing a child seat, check

that it complies with the regulations for

the country you are in and that it can

be fitted in your vehicle. Consult an ap-

proved dealer to find out which seats

are recommended for your vehicle.

Do not use a second-hand child

seat or one without an instruction

manual.

Check that there are no objects in

the vicinity of the child seat which

could impede its operation.

Before fitting a child seat, read the

manual and respect its instructions. If

you experience any difficulties during

installation, contact the manufacturer

of the equipment. Keep the instructions

with the seat.

Never leave a child unat-

tended in the vehicle.

Check that your child is

always strapped in and that

the belt or safety harness used is

correctly set and adjusted. Avoid

wearing bulky clothing which could

cause the belts to slacken.

Never let your child put their head or

arms out of the window.

Check that the child is in the correct

position for the entire journey, espe-

cially if asleep.

1.44

CHILD SAFETY: choosing a child seat

Rear-facing child seats

Forward-facing child seats

Booster cushions

A baby’s head is, proportionally, heavier

than that of an adult and its neck is very

fragile. Transport the child in this po-

sition for as long as possible (until the

age of 2 at the very least). It supports

both the head and the neck.

The child’s head and abdomen need to

be protected as a priority. A forward-fac-

ing child seat which is firmly attached to

the vehicle will reduce the risk of impact

to the head. Ensure your child travels in

a forward-facing seat with a harness for

as long as their size permits.

From 15 kg or 4 years, the child can

travel using a booster seat, which will

enable the seat belt to be adapted

to suit his/her size and shape. The

booster seat cushion must be fitted with

guides to position the seat belt on the

child’s thighs rather than the stomach.

It is recommended that you use a seat-

back fitted with a belt strap guide which

can be adjusted in terms of height to

position the seat belt in the centre of the

shoulder. It must never rest on the neck

or on the arm.

Choose a bucket type seat for best side

protection and change it as soon as the

child’s head is higher than the shell.

Choose a bucket type seat for optimum

side protection.

Choose a bucket type seat for optimum

side protection.

1.45

CHILD SAFETY: choosing a child seat mounting (1/3)

There are two ways of attaching child

seats: via the seat belt or using the

ISOFIX system.

Attachment via the seat belt

The seat belt must be adjusted to

ensure that it is effective in the event of

harsh braking or an impact.

Ensure that the strap paths indicated

by the child seat manufacturer are re-

spected.

Always check that the seat belt is cor-

rectly fastened by pulling it up, then

pulling it out fully whilst pressing on the

child seat.

Check that the seat is correctly held by

moving it from side to side and back

to front: the seat should remain firmly

fixed.

Check that the child seat has not been

installed at an angle and that it is not

resting against a window.

The seat belt must never

be twisted or the tension

relieved. Never pass the

shoulder strap under the

arm or behind the back.

Check that the seat belt has not

been damaged by sharp edges.

If the seat belt does not operate nor-

mally, it will not protect the child.

Consult an approved dealer. Do not

use this seat until the seat belt has

been repaired.

Do not use the child seat

if it may unfasten the seat

belt restraining it: the base

of the seat must not rest on

the buckle and/or catch of the seat

belt.

1.46

CHILD SAFETY: choosing a child seat mounting (2/3)

Attachment using the ISOFIX

system

Attach the child seat with the ISOFIX

locks, if these are provided. The ISOFIX

system allows quick, easy, safe fitting.

Approved child seats ISOFIX are stand-

ardised in accordance with current reg-

ulations if any of the four cases below

applies:

The ISOFIX system consists of 2 rings

and, in some cases, a third ring.

– ISOFIX universal 3-point forward-

facing seat;

– ISOFIX semi-universal 2-point seat;

– Specific;

– i-Size Which has:

– either a belt which attaches to the

third ring of the seat concerned;

– or a strut that rests on the vehi-

cle floor, compatible with the ap-

proved seat i-Size, the role of

which is to prevent the child seat

from moving in the event of a col-

lision.

No modifications may be

made to the component

parts of the restraint system

The ISOFIX anchorage

points have been exclu-

sively designed for child

(ISOFIX seat belts, seats

and their mountings) originally fitted.

In the latter three cases check that your

child seat can be installed by consulting

the list of compatible vehicles.

seats with the ISOFIX

system. Never fit a different type of

child seat, seat belt or other objects

to these anchorage points. Check

that nothing is obstructing the an-

chorage points.

Before using an ISOFIX

child seat that you pur-

chased for another vehicle,

check that its installation is

authorised. Consult the list of ve-

hicles which can be fitted with the

seat from the equipment manufac-

turer.

If your vehicle has been involved in

a road accident, have the ISOFIX

anchorage points checked and re-

place your child seat.

1.47

CHILD SAFETY: choosing a child seat mounting (3/3)

2

3

1

Attachment using the ISOFIX

system (continued)

The two rings 1 are located between the

Rear side seats

The third ring 2 or 3 is used to attach

the upper strap on some seats ISOFIX.

^{seatback and the seat}^{base of the seat}

symbol.

The rings are located on the rear seat-

^{backs and indicated by the symbol}.

and are identified by a

Check that the seatback

of the forward-facing child

seat is in contact with the

seatback of the vehicle

seat. In this case, the child seat may

not always rest on the seat base of

the vehicle seat.

The child seat strap must

be attached to the corre-

sponding ring.

Do not use any other

mounting point.

1.48

CHILD SAFETY: fitting a child seat, general information (1/2)

Some seats are not suitable for fitting

child seats. The diagram on the follow-

ing page shows you how to attach a

child seat.

The types of child seats indicated may

not be available. Before using a differ-

ent child seat, check with the manufac-

turer that it can be fitted.

After installing the child seat, when this

is possible, you can move the vehi-

cle seat forward if necessary (so as to

leave enough space in the rear seats

for passengers or other child seats). In

the case of a rear-facing child seat, do

not let it touch the dashboard or move it

to the furthest forward position.

In the front seat

The laws concerning children travel-

ling in the front passenger seat differ in

every country. Consult the legislation in

force and follow the indications on the

diagram on the following page.

Fit the child seat in a rear

seat wherever possible.

Do not change other settings after in-

stalling the child seat.

Make sure that the child

seat or the child’s feet do

not prevent the front seat from lock-

ing correctly. Refer to the informa-

tion on the “Front seat” in Section 1.

Before fitting a child seat in this seat (if

authorised):

– lower the seat belt as far as possible;

– move the seat as far back as possi-

ble;

– gently tilt the seatback away from

vertical (approximately 25°);

– on equipped vehicles, raise the seat

base as far as possible.

Check that when installing the child

seat in the vehicle it is not at risk of

coming loose from its base.

If you have to remove the headrest,

check that it is correctly stored so

that it does not come loose under

harsh braking or impact.

In all situations, reinsert the headrest to

its full extent so that it does not interfere

with the child seat (see the information

on “Front headrests” in Section 1);

RISK OF DEATH OR

SERIOUS INJURY: before

fitting a rear-facing child

seat to this seat, check

that the airbag has been deacti-

vated (refer to the information on

“Child safety: deactivating/activat-

ing the front passenger airbag” in

Section 1).

Always attach the child seat to the

vehicle even if it is not in use so that

it does not come loose under harsh

braking or impact.

1.49

CHILD SAFETY: fitting a child seat, general information (2/2)

In the rear seat

For 7-seater vehicles, the second row

rear seats must be pushed forward

before a child is seated in the third row

rear seats.

A carrycot can be installed across the

vehicle and will take up at least two

seats. Position the child with his or her

feet nearest the door.

Move the front seat as far forward as

possible to install a rear-facing child

seat, then move back the seat in front

as far as it will go, although without al-

lowing it to come into contact with the

child seat.

When fitting a child seat

(Group 2 or 3 booster seat),

check that the seat belts op-

erate (wind) correctly: refer

to Section 1 “Rear seat belts”. If

necessary, adjust the position of the

vehicle seat.

For the safety of the child in the for-

ward-facing position:

– move the relevant seat backwards

as far as possible;

For 7-seater vehicles, a

child seat with a floor sup-

port should never be in-

stalled on the third row rear

seats.

– move the seat in front of the child

forwards, and set the position of the

seatback to avoid contact between

the seat and the child’s legs.

Always remove the headrest from the

rear seat used for the child seat (see

“Rear headrests” in Section 3). If nec-

essary, position the rear seat as far

back as possible. This must be done

before fitting the child seat.

The floor of your vehicle

has storage spaces. Before

installing a child seat with

a floor support, ensure that

this seat can be correctly installed

by consulting the list of compatible

vehicles supplied with the child seat.

Ensure that the child seat

or the child’s feet do not

prevent the front seat from

locking correctly. Refer to

the information on the “Front seat”

in Section 1 or the “Rear seats” in

Section 3.

Check that the child seat is resting

against the back of the rear seat.

Risk of serious injury in the event

of sudden braking or accident.

1.50

CHILD SEATS: attachment by seat belt (1/6)

Visual installation of the five-seater version

3

Check the status of the airbag

before fitting a child seat or allowing a

passenger to use the seat.

Seat not suitable for fitting

child seats.

2

¬

Seat which allows a child seat

with “Universal” approval to be attached

by a seat belt.

RISK OF DEATH OR

SERIOUS INJURY: before

installing a rear-facing child

Using a child safety system

which is not approved for

this vehicle will not correctly

seat in the front passen-

ger seat, make sure the airbag has

been deactivated (refer to the infor-

mation on “Child safety: front pas-

senger airbag deactivation/activa-

tion” in Section 1).

protect the baby or child.

They risk serious or even fatal injury.

1.51

CHILD SEATS: attachment by seat belt (2/6)

The table below summarises the information already shown on the diagram on the previous page, to ensure the applica-

ble regulations are respected.

Five-seater version

Front passenger seat

Weight of

Type of child seat

Rear side seats

Rear centre seat

Without airbag

or with airbag

deactivated

the child

With airbag

activated

Carrycot

across the vehicle

Group 0

fitted

< 10 kg

X

U (2)

U (3)

X

Rear-facing shell

seat

Groups 0 or 0 +

<

10 kg and

U (1) (5)

< 13 kg

Shell seat/rear-facing

seat

Groups 0+ and 1

< 13 kg and 9 to

18 kg

U (1) (5)

X

U (3)

X

Forward-facing seat

Group 1

9 to 18 kg

X

U (5)

U (3) (4)

X

Booster seat

Groups 2 and 3

15 to 25 kg and

22 to 36 kg

(1) RISK OF DEATH OR SERIOUS INJURY: before installing a rear-facing child seat in the front passenger seat,

make sure the airbag has been deactivated (refer to the information on “Child safety: front passenger airbag deactiva-

tion/activation” in Section 1).

1.52

CHILD SEATS: attachment by seat belt (3/6)

X = Seat not suitable for fitting child seats of this type.

U = Seat which allows a child seat with “Universal” approval to be installed using a seat belt; check that it can be fitted.

(2) A carrycot can be installed across the vehicle and will take up at least two seats. Position the child with his or her feet nearest

the door.

(3) If necessary, position the vehicle seat as far back as possible. Move the front seat as far forward as possible to install a rear-

facing child seat, then move back the seat in front as far as it will go, although without allowing it to come into contact with the

child seat.

(4) In all situations, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the

child seat. Please refer to the information on the “Rear headrests” in Section 3. Move the seat in front of the child forwards,

move the seatback forward to avoid contact between the seat and the child’s legs.

(5) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).

1.53

CHILD SEATS: attachment by seat belt (4/6)

The table below summarises the information already shown in the diagram on the following pages, to ensure the appli-

cable regulations are respected.

Seven-seat version

Front passenger seat

Row 2 rear

side seats

Row 2 rear 3rd row rear

Type of child seat

Weight of the child

centre seat

seats (5)

Without airbag

or with airbag

deactivated

With airbag

activated

Carrycot

across the vehicle

Group 0

fitted

< 10 kg

X

U (2)

U (3)

X

Rear-facing shell

seat

< 10 kg and < 13 kg

U (1) (6)

Groups 0 or 0 +

Shell seat/rear-facing

seat

Groups 0+ and 1

< 13 kg and 9 to

18 kg

U (1) (6)

X

U (3)

X

Forward-facing seat

Group 1

9 to 18 kg

X

U (6)

U (3) (4)

X

U (7)

U

Booster seat

Groups 2 and 3

15 to 25 kg and 22

to 36 kg

(1) RISK OF DEATH OR SERIOUS INJURY: before installing a rear-facing child seat in the front passenger seat,

make sure the airbag has been deactivated (refer to the information on “Child safety: front passenger airbag deactiva-

tion/activation” in Section 1).

1.54

CHILD SEATS: attachment by seat belt (5/6)

X = Seat not suitable for fitting child seats of this type.

U = Seat which allows a child seat with “Universal” approval to be installed using a seat belt; check that it can be fitted.

(2) A carrycot can be installed across the vehicle and will take up at least two seats. Position the child with his or her feet nearest

the door.

(3) If necessary, position the vehicle seat as far back as possible. Move the front seat as far forward as possible to install a rear-

facing child seat, then move back the seat in front as far as it will go, although without allowing it to come into contact with the

child seat.

(4) In all situations, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the

child seat. Please refer to the information on the “Rear headrests” in Section 3. Move the seat in front of the child forwards,

move the seatback forward to avoid contact between the seat and the child’s legs.

(5) Push the seat(s) in front of the child in a third row seat as far forward as possible.

(6) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).

(7) RISK OF DEATH OR SERIOUS INJURY: a child seat with a floor support must never be fitted.

1.55

CHILD SEATS: attachment by seat belt (6/6)

Installation diagram, 7-seater version

3

Check the status of the airbag

before fitting a child seat or allowing a

passenger to use the seat.

Seat not suitable for fitting

child seats.

2

¬

Seat which allows a child seat

with “Universal” approval to be attached

by a seat belt.

RISK OF DEATH OR

SERIOUS INJURY: before

installing a rear-facing child

Using a child safety system

which is not approved for

this vehicle will not correctly

seat in the front passen-

ger seat, make sure the airbag has

been deactivated (refer to the infor-

mation on “Child safety: front pas-

senger airbag deactivation/activa-

tion” in Section 1).

protect the baby or child.

They risk serious or even fatal injury.

1.56

CHILD SEATS: attachment using the isofix system (1/6)

Visual installation of the five-seater version



Seat which allows an ISOFIX

child seat to be fitted.

The rear seats are fitted with

an anchorage point which allows a

forward-facing ISOFIX child seat with

universal approval to be attached. The

anchorage points are located on the

backs of the rear seats.

Seat which does not allow a

child seat to be fitted.

Fit the child seat in a rear

seat wherever possible.

2

Fitting a seat ISOFIX in the

rear-left seat means the

middle seat cannot be used. The

central seat belt will no longer be

either accessible or useable.

RISK OF DEATH OR

SERIOUS INJURY: before

installing a rear-facing child

Using a child safety system

which is not approved for

this vehicle will not correctly

seat in the front passen-

ger seat, make sure the airbag has

been deactivated (refer to the infor-

mation on “Child safety: front pas-

senger airbag deactivation/activa-

tion” in Section 1).

To install an ISOFIX seat in this

seat, detach the central seat belt by

hand before engaging the bolts.

protect the baby or child.

They risk serious or even fatal injury.

1.57

CHILD SEATS: attachment using the ISOFIX system (2/6)

The table below summarises the information already shown on the diagram on the previous page, to ensure the regula-

tions in force are respected.

Five-seater version

Front passenger seat

Weight of

the child

Seat size

ISOFIX

Rear side

seats

Rear centre

seat

Type of child seat

Without airbag

or with airbag

deactivated

With airbag

activated

Carrycot fitted across

the vehicle

Group 0

< 10 kg

F, G

E

X

Rear-facing shell seat < 10 kg and

Groups 0 or 0 +

IL (1) (4)

IL (2)

< 13 kg

Shell seat/rear-facing

seat

Groups 0+ and 1

< 13 kg and 9

to 18 kg

C, D

IL (1) (4)

X

IL (2)

X

Forward-facing seat

Group 1

IUF - IL

(2) (3)

9 to 18 kg

A, B, B1

X

IUF - IL (1)

X

15 to 25 kg

and 22 to

36 kg

Booster seat

Groups 2 and 3

IUF - IL

(2) (3)

Seat i-Size

i-U (1) (4)

X

i-U

X

1.58

CHILD SEATS: attachment using the ISOFIX system (3/6)

X = Seat not suitable for fitting child seats of this type.

IUF/IL = On equipped vehicles, seat which allows an approved “Universal/semi-universal” or “vehicle specific” child seat to be at-

tached using the ISOFIX system; check that it can be fitted.

i-U = Suitable for “universal” front-facing and rear-facing i-Size restraint devices.

(1) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).

(2) If necessary, position the vehicle seat as far back as possible. Move the front seat as far forward as possible to install a rear-

facing child seat, then move back the seat in front as far as it will go, although without allowing it to come into contact with the

child seat.

(3) In all situations, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the

child seat. Please refer to the information on the “Rear headrests” in Section 3. Move the seat in front of the child forwards,

move the seatback forward to avoid contact between the seat and the child’s legs.

The size of the ISOFIX child seat is indicated by a letter:

– A, B and B1: for forward-facing seats in group 1 (9 to 18 kg);

– C and D: shell seat or rear-facing seats in group 0+ (less than 13 kg) or group 1 (9 to 18 kg);

– E: rear-facing shell seats in group 0 (less than 10 kg) or 0+ (less than 13 kg);

– F and G: cots in group 0 (less than 10 kg).

(4RISK OF DEATH OR SERIOUS INJURY:) before installing a rear-facing child seat in the front passenger seat,

make sure the airbag has been deactivated (refer to the information on “Child safety: front passenger airbag deactiva-

tion/activation” in Section 1).

1.59

CHILD SEATS: attachment using the isofix system (4/6)

The table below summarises the information already shown in the diagram on the following pages, to ensure the appli-

cable regulations are respected.

Seven-seat version

Front passenger seat

Weight of

the child

Seat size

ISOFIX

Row 2 rear Row 2 rear

side seats centre seat rear seats

3rd row

Type of child seat

Without

airbag or

with airbag

deactivated

With airbag

activated

Carrycot fitted across

the vehicle

Group 0

< 10 kg

F, G

E

X

Rear-facing shell seat < 10 kg and

Groups 0 or 0 +

IL (1) (4)

IL (2)

< 13 kg

Shell seat/rear-facing

seat

Groups 0+ and 1

< 13 kg and 9

to 18 kg

C, D

IL (1) (4)

X

IL (2)

X

Forward-facing seat

Group 1

9 to 18 kg

A, B, B1

X

IUF - IL (1) IUF - IL (2) (3)

15 to 25 kg

and 22 to

36 kg

Booster seat

Groups 2 and 3

Seat i-Size

i-U (1) (4)

X

i-U

X

1.60

CHILD SEATS: attachment using the isofix system (5/6)

X = Seat not suitable for fitting child seats of this type.

IUF/IL = On equipped vehicles, seat which allows an approved “Universal/semi-universal” or “vehicle specific” child seat to be at-

tached using the ISOFIX system; check that it can be fitted.

i-U = Suitable for “universal” front-facing and rear-facing i-Size restraint devices.

(1) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).

(2) If necessary, position the vehicle seat as far back as possible. Move the front seat as far forward as possible to install a rear-

facing child seat, then move back the seat in front as far as it will go, although without allowing it to come into contact with the

child seat.

(3) In all situations, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the

child seat. Please refer to the information on the “Rear headrests” in Section 3. Move the seat in front of the child forwards,

move the seatback forward to avoid contact between the seat and the child’s legs.

The size of the ISOFIX child seat is indicated by a letter:

– A, B and B1: for forward-facing seats in group 1 (9 to 18 kg);

– C and D: shell seat or rear-facing seats in group 0+ (less than 13 kg) or group 1 (9 to 18 kg);

– E: rear-facing shell seats in group 0 (less than 10 kg) or 0+ (less than 13 kg);

– F and G: cots in group 0 (less than 10 kg).

(4RISK OF DEATH OR SERIOUS INJURY:) before installing a rear-facing child seat in the front passenger seat,

make sure the airbag has been deactivated (refer to the information on “Child safety: front passenger airbag deactiva-

tion/activation” in Section 1).

1.61

CHILD SEATS: attachment using the isofix system (6/6)

Visual installation of seven-seater version



Seat which allows an ISOFIX

child seat to be fitted.

The rear seats are fitted with

an anchorage point which allows a

forward-facing ISOFIX child seat with

universal approval to be attached. The

anchorage points are located on the

backs of the rear seats.

Seat which does not allow a

child seat to be fitted.

Fit the child seat in a rear

seat wherever possible.

2

Fitting a seat ISOFIX in the

rear-left seat means the

middle seat cannot be used. The

central seat belt will no longer be

either accessible or useable.

RISK OF DEATH OR

SERIOUS INJURY: before

installing a rear-facing child

Using a child safety system

which is not approved for

this vehicle will not correctly

seat in the front passen-

ger seat, make sure the airbag has

been deactivated (refer to the infor-

mation on “Child safety: front pas-

senger airbag deactivation/activa-

tion” in Section 1).

To install an ISOFIX seat in this

seat, detach the central seat belt by

hand before engaging the bolts.

protect the baby or child.

They risk serious or even fatal injury.

1.62

CHILD SAFETY: deactivating, activating front passenger AIRBAG (1/3)

The front passenger airbag

2

must only be activated or

deactivated when the vehi-

cle is stationary with the

1

ignition off.

If it is interfered with when the ve-

hicle is being driven, indicator lights

3

å

and © will come on.

Switch the ignition off then on again

to reset the airbag in accordance

with the lock position.

To deactivate the airbag: with the ve-

hicle stopped and the ignition off,

push and turn the lock 1 to the OFF po-

sition.

Deactivating the front

passenger airbag

Before installing a child seat on the

front passenger seat:

With the ignition on, it is essential to

DANGER

– check that the child seat can be in-

stalled on this seat;

check that the

1

warning light is

Since operation of the front

passenger airbag is not

compatible with the po-

correctly lit on the display 2 or, depend-

ing on the vehicle, on the rear-view

mirror 3.

– it is essential to deactivate the

airbagfor a rear-facing child seat.

sition of a rear-facing child seat,

NEVER fit a rear-facing child re-

straint system in a seat protected

by an ACTIVATED front AIRBAG.

This can lead to the DEATH of the

CHILD or SERIOUS INJURY.

This light remains permanently lit to

let you know that you can fit a child

seat.

1.63

CHILD SAFETY: deactivating, activating front passenger AIRBAG (2/3)

A

4

The markings on the dashboard and

labels A on each side of the passen-

ger sun visor 4 (example: label shown

above) remind you of these instruc-

tions.

DANGER

Since operation of the front

passenger airbag is not

compatible with the po-

sition of a rear-facing child seat,

NEVER fit a rear-facing child re-

straint system in a seat protected

by an ACTIVATED front AIRBAG.

This can lead to the DEATH of the

CHILD or SERIOUS INJURY.

1.64

CHILD SAFETY: deactivating, activating front passenger AIRBAG (3/3)

Operating faults

It is forbidden to fit a rear-facing child

seat to the front passenger seat if the

airbag activation/deactivation system is

faulty.

2

Allowing any other passenger to sit in

that seat is not recommended.

1

Contact your approved dealer as soon

as possible.

3

To reactivate the airbag : with the

vehicle stoppedand the ignition off,

push and turn lock 1 to the ON position.

With the ignition on, it is essential to

Activating the front

passenger airbag

You should reactivate the airbag as

soon as you remove the child seat from

the front passenger seat to ensure the

protection of the front passenger in the

event of an impact.

The front passenger airbag

must only be activated or

deactivated when the vehi-

cle is stationary with the

ignition off.

]

off and that the

^{check that the}^{warning light is}

light is lit on the

display 2 or, depending on the vehicle,

on the rear-view mirror 3 for around

1 minute after each time the engine is

started.

If it is interfered with when the ve-

hicle is being driven, indicator lights

å

and © will come on.

The front passenger airbag is activated.

Switch the ignition off then on again

to reset the airbag in accordance

with the lock position.

1.65

DRIVER’S POSITION, LEFT-HAND DRIVE (1/2)

1 2 3 4

11

2

5 6 7

8

1

10

1

9

12

13

1

2

16

17

14

29

15

24

25

23

26

18

22

18

19

20

16

28

21

17

1.66

DRIVER’S POSITION, LEFT-HAND DRIVE (2/2)

The equipment fitted, described below, DEPENDS ON THE VERSION AND COUNTRY.

1 Air vent.

2 Demister outlet.

3 Stalk for:

11 Multifunction screen controls:

– screen activation/deactivation;

– volume;

17 Main switch for:

– speed limiter;

– cruise control;

– direction indicator lights;

– exterior lights;

– rear fog lights.

– welcome menu;

– driving aids menu;

– settings.

– adaptive cruise control.

18 Gearstick.

19 Accessories and multimedia sock-

ets.

20 Multi-Sense control.

21 Automatic gearbox gear display.

22 Handbrake.

4 Steering wheel with driver’s Airbag

location, horn.

5 Instrument panel.

6 Head-up display.

12 Switches for:

– hazard warning lights;

– electric door locking.

7 Controls for:

23 Engine start/stop button (vehicles

with RENAULT card).

13 Passenger Airbag location.

– on-board computer information

read-out and vehicle settings cus-

tomisation menu,

– remote radio and navigation

system.

8 Steering column stalk for wind-

screen and rear screen wash/

wiper.

24 Ignition switch (vehicles with key).

25 Control for adjusting steering

wheel height and reach.

26 Cruise control/speed limiter and

adaptive cruise control controls.

28 Bonnet release control.

29 Controls for:

14 glove box or storage drawer.

15 Controls for:

– front seat heating;

– activation/deactivation, depend-

ing on the vehicle, of the ECO

mode;

– activation/deactivation of the

parking distance control system;

– activation/deactivation of the

function Stop and Start.

9 Heating or air conditioning con-

trols.

10 Multifunction touch-screen.

– headlight beam height remote ad-

justment;

– instrument panel lighting dimmer.

16 Assisted parking brake control.

1.67

DRIVING POSITION: RIGHT-HAND DRIVE (1/2)

13

14

1

3

4

5

8

6

2

9

2

1

7

12

11

1

2

1

10

26

17

20 19 18

21

16

25

22

15

24

28

20

21

23

27

1.68

DRIVING POSITION: RIGHT-HAND DRIVE (2/2)

The equipment fitted, described below, DEPENDS ON THE VERSION AND COUNTRY.

1 Air vent.

2 Demister outlet.

3 Passenger Airbag location.

4 Controls for:

10 Head-up display.

11 Instrument panel.

19 Switches for:

– hazard warning lights;

– electric door locking.

12 Steering wheel with driver’s Airbag

20 Assisted parking brake control.

– front seat heating;

location, horn.

– activation/deactivation, depend-

ing on the vehicle, of the ECO

mode;

21 Main switch for:

– speed limiter;

13 Controls for:

– on-board computer information

read-out and vehicle settings cus-

tomisation menu,

– remote radio and navigation

system.

– cruise control;

– adaptive cruise control.

– activation/deactivation of the

parking distance control system;

– activation/deactivation of the

function Stop and Start.

5 Heating or air conditioning con-

trols.

22 Handbrake.

23 Accessories and multimedia sock-

14 Steering column stalk for wind-

screen and rear screen wash/

wiper.

15 Controls for:

– headlight beam height remote ad-

justment;

ets.

6 Multifunction touch-screen.

7 Multifunction screen controls:

– screen activation/deactivation;

– volume;

– welcome menu;

– driving aids menu;

24 Multi-Sense control.

25 Gearstick.

26 glove box or storage drawer.

27 Automatic gearbox gear display.

28 Bonnet release control.

– instrument panel lighting dimmer.

16 Ignition switch (vehicles with key).

17 Control for adjusting steering

wheel height and reach.

18 Engine start/stop button (vehicles

with RENAULT card).

– settings.

8 Stalk:

– direction indicator lights;

– exterior lights;

– rear fog lights.

9 Cruise control/speed limiter and

adaptive cruise control controls.

1.69

WARNING LIGHTS (1/6)

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Side light warning light

š

á

k





Main beam headlight tell-

tale

A

B

Dipped beam headlight tell-

tale

Rear fog lights tell-tale

Automatic main beam head-

light indicator light

Please refer to the information

on “External signals and lights” in

Section 1.

Left-hand direction indicator

tell-tale

Instrument panel A or B: this comes

on when the driver's door is opened.

In some cases, the appearance of a

warning light is accompanied by a mes-

sage.

c

b

Right-hand direction indica-

tor tell-tale

If no lights or sounds are ap-

parent, this indicates a fault

Warning light ® re-

quires you to stop immedi-

ately, for your own safety,

as soon as traffic conditions

allow. Switch off the engine and do

not restart it. Contact an approved

Dealer.

in the instrument panel. This

indicates that it is essential

to stop immediately (as soon as traf-

fic conditions allow). Ensure that the

vehicle is correctly immobilised and

contact an approved Dealer.

The © warning light means

you should drive very carefully to

an approved dealer as soon as pos-

sible. If you fail to follow this recom-

mendation, you risk damaging your

vehicle.

1.70

WARNING LIGHTS (2/6)

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Low fuel level warning light

It lights up orange when the ig-

Brake circuit fault warning

light

Oil pressure warning light

M

D

À

It lights up when the ignition or

the engine is switched on and goes off

after a few seconds.

nition or the engine is switched on then,

depending on the vehicle, goes off after

a few seconds or is displayed in white.

If it comes on orange while driving and

is accompanied by a beep, fill up with

fuel as soon as possible. There is only

approximately 30 miles (50 km) worth

of fuel left.

It lights up when the ignition or the

engine is switched on and goes off after

a few seconds.

If it comes on on the road, accompa-

^{nied by the}® warning light and

a beep, stop immediately and cut the

ignition.

If it comes on during braking and is ac-

^{companied by the}® warning light

and a beep, it indicates that the fluid

level in the circuit is low or that there is

a braking system fault.

Check the oil level. If the level is normal,

the warning light is related to something

else.

STOP light

This lights up when the igni-

tion or engine is switched on and goes

out as soon as the engine is running. It

comes on with other warning lights and/

or messages, and is accompanied by

a beep.

®

Stop as soon as traffic conditions allow

and consult an approved dealer.

Call an approved Dealer.

Battery charge warning light

Ú

Warning light for the elec-

tronic stability program

(ESC) and traction control system



It lights up when the ignition or

the engine is switched on and goes off

after a few seconds.

It lights up when the ignition or the

engine is switched on and goes off after

a few seconds.

It requires you to stop immediately, for

your own safety, as soon as traffic con-

ditions allow. Switch off the engine and

do not restart it.

If it comes on on the road, accompa-

^{nied by the}® warning light and a

beep, this indicates an overload or dis-

charge in the electrical circuit.

There are several reasons for the warn-

ing light to come on: please refer to the

information on “Driver correction de-

vices and aids” in Section 2.

Contact an approved Dealer.

Stop as soon as traffic conditions allow

and contact an approved Dealer.

1.71

WARNING LIGHTS (3/6)

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Variable power-assisted

steering warning light

Toxic Fume Filter System

Warning Light

Anti-lock braking warning

light

U

Ä

x

It lights up when the ignition or the

engine is switched on and goes off after

a few seconds.

On vehicles which are equipped with it,

this light comes on when the engine is

started and, depending on the vehicle,

when the ignition is switched off if the

vehicle is in the engine standby phase

(refer to the information on the “Stop

and Start function” in Section 2) then

goes out.

It lights up when the ignition or the

engine is switched on and goes off after

a few seconds.

If it comes on while driving, alongside

^{the warning light}®, this means

there is a system fault.

If it lights up when you are driving, it in-

dicates a fault in the anti-lock braking

system.

Braking will then be as normal, without

the ABS. Contact an approved Dealer

as soon as possible.

Contact an authorised dealer.

Warning light

©

– If it lights up continuously, consult

your approved dealer as soon as

possible;

This lights up when the ignition

Coolant temperature warn-

ing light

or engine is switched on and goes out

as soon as the engine is running. It can

light up in conjunction with other warn-

ing lights and/or messages on the in-

strument panel.

Ô

– if it flashes, reduce the engine speed

until the light stops flashing. Contact

your approved Dealer as soon as

possible.

This lights up red when the ignition is

switched on or the engine is started.

If it turns red, stop and let the engine

idle for a minute or two.

It means you should drive very care-

fully to an approved dealer as soon as

possible. If you fail to follow this recom-

mendation, you risk damaging your ve-

hicle.

Please refer to the information on

“Maintenance and anti-pollution advice”

in Section 2.

The temperature should drop.

Otherwise, stop the engine. Let the

engine cool down before checking the

coolant.

Contact an approved Dealer.

1.72

WARNING LIGHTS (4/6)

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Preheating warning light

(diesel version)

Indicator lightAirbag

It lights up when the ignition or

the engine is switched on and goes off

after a few seconds.

Engine standby warning

light

Please see information in the para-

graph on “Stop and Start Function” in

Section 2.

É

å



This should come on when the igni-

tion is switched on. It indicates that the

heater plugs are in operation.

If it does not come on when the igni-

tion is switched on, or comes on when

the engine is running, there is a fault in

the system.

Unavailability of engine

standby warning light

Please see information in the para-

graph on “Stop and Start Function” in

Section 2.

It goes out when preheating is com-

plete. The engine can be started.



Door status warning light

Contact your approved Dealer as soon

as possible.

2

Gear change indicators

Š‰

Speed limiter warning

Brake pedal warning light

Ó

ÐÎ_lights

This lights up to advise you to

This lights up when the brake

Refer to the information on the “Speed

limiter” in Section 2.

change to a higher gear (up arrow) or

lower gear (down arrow).

pedal should be depressed. Refer to

the information on the “Automatic gear-

box” in Section 2.

Cruise control

ÏÎ¦_{warning lights}

Depending on the vehicle, the most

suitable gear is displayed on the instru-

ment panel.

Please refer to the information on

“Driving advice, Eco-driving” in Section

2.

Refer to the information on “Cruise con-

trol” in Section 2.

Please refer to the information on

“Driving advice, Eco-driving” in

Section 2.

Adaptive cruise control

warning light

Refer to the information on "Adaptive

cruise control" in Section 2.



Handbrake “on” and elec-

}

tronic parking brake warn-

ing light

Refer to the information on the

“Handbrake” and "Electronic parking

brake" in Section 2.

Assisted parking brake fault

light

Please refer to the information on the

“Assisted parking brake” in Section 2.



1.73

WARNING LIGHTS (5/6)

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Tyre pressure monitoring

system

Free wheel warning light in

mode ECO





Refer to the information on the “Tyre

pressure monitoring system” in

Section 2.

It lights up in mode ECO when the

“Free wheel in mode ECO” is activated

(ON) in the user settings.

The warning light colour is dim when

the vehicle is not while freewheeling.

This warning light is bright when the ve-

hicle is while freewheeling (automatic

neutral).

Lane departure system

warning light

Please refer to the information on “Lane

departure warning” in Section 2.



Emergency active brake

assist

Refer to the information on “Active

emergency braking” in Section 2.

Please refer to the information on

“Driving advice, ECO-driving” in

Section 2.



Warning light for reagent

Particle filter system warn-

ing light (petrol version)

Refer to the “Special features of petrol

versions” in Section 2.



Refer to the information on “Reagent

tank” in Section 1.

level and faults in the ex-



haust gas reduction system

ECO mode warning light

This comes on when ECO

mode is activated.



Please refer to the information on

“Driving advice, Eco-driving" in

Section 2.

1.74

WARNING LIGHTS (6/6)

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Driver’s seat belt reminder

and, depending on the vehi-

cle, front passenger seat belt re-

ß

C

minder.

Please see the information on “Seat

belts” in Section 1.

Rear seat belt reminder (depending

on vehicle)

Please see the information on “Seat

belts” in Section 1.

D

On display C or, depending on the

vehicle, on the rear-view mirror D

Passenger Airbag ON

Refer to the information on

“Child safety: deactivating/activating

the front passenger airbag” in Section 1.



Passenger Airbag OFF

Refer to the information on

“Child safety: deactivating/activating

the front passenger airbag” in

Section 1).

1

1.75

DISPLAYS AND INDICATORS (1/6)

Overspeed buzzer

Depending on the vehicle and coun-

try, a buzzer sounds for approximately

10 seconds every 40 seconds, as long

as the vehicle is travelling in excess of

72 mph (120 km/h).

1

A

Driving style indicator 3

2

Please refer to the information on

“ECO-driving” in Section 2.

Trip computer and warning system

3

Refer to the information on the “Trip

computer and warning system” in

Section 1.

Rev counter 1

(graduations x 1000)

Instrument panel A

lights up when the driver’s door is

opened. In some cases, the appear-

ance of a warning light is accompanied

by a message.

Speedometer 2

This is displayed differently according

to how the instrument panel is custom-

ised.

You can customise your instrument

panel with the content and colours of

your choice.

For vehicles fitted with a navigation

system, refer to the handbook for the

equipment.

For vehicles not fitted with a naviga-

tion system, refer to the information on

“Vehicle settings customisation menu”

in Section 1.

1.76

DISPLAYS AND INDICATORS (2/6)

4

5

Coolant temperature indicator 4

Fuel gauge 5

If the level is at the minimum, warn-

ing light

M

integrated in the indica-

tor comes on orange, accompanied by

a beep. Fill up as soon as possible.

1.77

DISPLAYS AND INDICATORS (3/6)

7

B

6

8

Rev counter 6

(graduations x 1000)

Driving style indicator 8

Instrument panel B

Please refer to the information on

“ECO-driving” in Section 2.

lights up when the driver’s door is

opened. In some cases, the appear-

ance of a warning light is accompanied

by a message.

Speedometer 7

This is displayed differently according

to how the instrument panel is custom-

ised.

Trip computer and warning system

Refer to the information on the “Trip

computer and warning system” in

Section 1.

Overspeed buzzer

Depending on the vehicle and coun-

try, a buzzer sounds for approximately

10 seconds every 40 seconds, as long

as the vehicle is travelling in excess of

72 mph (120 km/h).

1.78

DISPLAYS AND INDICATORS (4/6)

Instrument panel in miles

(option to switch to km/h)

Vehicles not fitted with a navigation

system

12

13

10

11

– With the ignition off, press the OK

button 12 and the engine start/stop

button 14;

– using control 13, select “Settings”,

“Instrument panel”, then the unit;

– Press the OK button 12 to confirm.

9

14

To return to the previous mode, repeat

the same operation.

Vehicles fitted with a navigation

system

Coolant temperature indicator 9

Engine oil level low warning

On the multifunction screen, select

“System” , “User profile” and “Unit”.

In normal use, the indicator 9 should be

before the red zone 10. Under “inten-

sive” operating conditions, the needle

may approach this zone. This is not se-

^{rious unless the warning light}®

comes on accompanied by a message

on the instrument panel and a beep.

When the engine is started, the instru-

ment panel display alerts you when the

minimum oil level is reached. Refer to

the information on the “Engine oil level”

in Section 4.

Note: In both cases, once the battery

is switched off, the on-board computer

automatically returns to the original unit

of measurement.

The first time the warning appears, it

can be cleared by pressing switch 12

“OK”. Subsequent warnings will disap-

pear automatically after around 30 sec-

onds.

Fuel gauge 11

If the level is at the minimum, warn-

ing light

M

integrated in the indica-

tor comes on orange, accompanied by

a beep. Fill up as soon as possible.

1.79

DISPLAYS AND INDICATORS (5/6)

You can adjust certain settings from the

multifunction screen: with the engine

running, access menu “System”,

“Display” then “Head-up display”.

15

Adjusting the display information

height

Depending on your driving position,

you can raise or lower the information

on the display.

Adjusting the display brightness

You can adjust the brightness (day or

night mode).

– Automatically: the brightness will

vary depending on the outdoor light.

– manually: the brightness automati-

cally switches with the activation/de-

activation of the lights.

Good information visibility can be af-

fected by:

Head-up display 15

– the seat position;

The display details driving and navi-

gation information from the instrument

panel and the multifunction screen.

– the presence of an object placed

on the opened display;

In both cases, the day mode varies

based on the outdoor brightness.

– the polarisation of some spectacle

lenses;

If fitted to the vehicle, this comes on

when the engine is started and is re-

tracted when the engine is switched off.

– extreme weather conditions (rain,

snow, very strong sunlight, etc.).

In the event of contradic-

tory information between

the instrument panel and

the head-up display/multi-

function screen, please refer to the

information displayed on the instru-

ment panel.

For safety reasons, carry

out any adjustments when

the vehicle is stationary.

Do not manually force the opening/

closure of the head-up display.

1.80

DISPLAYS AND INDICATORS (6/6)

Operating faults

In the event of a malfunction (the dis-

play fails to open when the engine is

started, or the display retracts, with the

engine running, following an object im-

pacting the display):

– stop and restart the engine;

or

– from the multifunction screen,

change the display opening settings.

If there is still a problem, contact an au-

thorised dealer.

With the display opened or closed,

no object should be placed on it or

in its housing.

Do not use solvents, detergents or

an abrasive cloth to clean the dis-

play.

Only use a microfibre wipe.

1.81

TRIP COMPUTER: general information (1/2)

Display selection keys 2

1

Scroll through the following information

by repeated short presses on button 2

(the display depends on the vehicle

equipment and country):

3

2

a) total mileage and trip mileage re-

corder;

b) journey parameters:

– average fuel consumption;

– current fuel consumption;

– Estimated range with remaining

fuel;

– distance travelled;

– average speed;

c) current speed;

Trip computer and warning

d) distance before service;

e) reset the tyre pressure;

system 1 or 3

Depending on the vehicle, this includes

the following functions:

f) trip log, operating faults and informa-

tion message readout;

– distance travelled;

g) Estimated range with remaining rea-

gent.

– journey parameters;

– information messages;

– operating fault messages (associ-

^{ated with the}© warning light);

– warning messages (associated with

^the® warning light);

All these functions are described on the

following pages.

1.82

ON-BOARD COMPUTER: general information (2/2)

Interpreting some of the

values displayed after

resetting

The values showing average fuel con-

sumption and average speed will

become more stable and reliable the

further you have travelled since the last

time the Reset button was pressed.

The average fuel consumption may de-

crease when:

4

– the vehicle stops accelerating;

– the engine reaches its operating

temperature (if the engine was cold

when the reset key was pressed);

Trip mileage resetting

– when driving from an urban area

With “trip mileage recorder” selected

on the display, press key OK 4 until the

mileage recorder resets to zero.

onto the open road.

Automatic resetting of the

journey parameters

Resetting occurs automatically when

the maximum value of any of the pa-

rameters is exceeded.

Resetting the journey

parameters (reset button)

with the display showing one of the trip

settings, press key OK 4 until the dis-

play is reset to zero.

1.83

ON-BOARD COMPUTER: trip settings (1/5)

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections

Interpreting the display selected

101778 km

112.4 km

a) Total mileage and trip mileage recorder.

Average

b) Journey parameters:

Average fuel consumption.

The value is displayed after having travelled at least 400 metres since the last

reset.

5.8 L/100

Current

Current fuel consumption.

Value displayed after reaching a speed, depending on the vehicle, from 6.2 mph

(10 km/h) to 18.6 mph (30 km/h).

7.4 L/100

1.84

ON-BOARD COMPUTER: trip settings (2/5)

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections

Interpreting the display selected

Range

b) Journey parameters (continued):

Estimated range with remaining fuel.

The value is displayed after driving 400 metres.

541 km

Distance

522 km

Distance travelled since last reset.

Average

Average speed since the last reset.

The value is displayed after driving 400 metres.

123.4 km/h

c) Current speed.

55.8 mph (90 km/h)

1.85

ON-BOARD COMPUTER: trip settings (3/5)

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections

Interpreting the display selected

On-board computer with mileage-

before-service message

d) Mileage before service or oil change.

Mileage before service

Service in

SERVICE

INTERVALS

With the ignition switched on, the engine not running and

the display set to “SERVICE INTERVALS”, press and hold the

OK button for approximately 5 seconds to display the mileage

before service (distance or time to the next service). When the

distance value approaches its limit, there are several possible

scenarios:

30 000 km / 12 mo

Service due in

– range less than 930 miles (1,500 km) or one month: the

message “Service due in” is displayed accompanied by the

nearest term (distance or time);

300 km / 24 days

– range equal to 0 miles (0 km) or date of service reached:

the message “Service required” is displayed accompanied by

^{the warning light}©.

Service required

The vehicle requires a service as soon as possible.

Reset: to reset the distance before the next service, press and hold button 2 for approximately 10 seconds until the display

shows the mileage before service permanently.

Note: If a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the

event of an oil change, both the distance before the next service and the next oil change should be reset.

1.86

TRIP COMPUTER: trip settings (4/5)

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections

Interpreting the display selected

On-board computer with distance before

next service message (cntd.)

d) Mileage before service or oil change.

Mileage before service

Oil change in

SERVICE

With the ignition on, the engine not running and the display

selected “ SERVICE INTERVALS “, press button OK for about

5 seconds to display the mileage before the next service, then

press the button 2 to view the mileage before the next oil change

(distance or time remaining before the next service). When the

distance value approaches its limit, there are several possible

scenarios:

– range less than 930 miles (1,500 km) or one month: the

message “Service due in” is displayed accompanied by the

nearest term (distance or time);

INTERVALS

30 000 km / 24 mo

Service due in

300 km / 24 days

– range equal to 0 miles (0 km) or date of oil change reached:

the message “Service required” is displayed accompanied by

Service required

The vehicle requires an oil change as soon as possible.

Depending on the vehicle, the mileage before an oil change varies according to the driving style (frequent driving at low speed,

door-to-door journeys, extensive use at idling speed, towing a trailer, etc.). The distance remaining until the next oil change can

therefore decrease more quickly in some cases than the actual distance travelled.

Resetting: to reset the mileage before a service, press and hold button 2 for approximately 10 seconds until the display shows

the range permanently.

NB: if a service is performed without changing the engine oil, only the mileage before the next service should be reset. In the

event of an oil change, both the distance before the next service and the next oil change should be reset.

1.87

ON-BOARD COMPUTER: trip settings (5/5)

The display of information shown below DEPENDS ON THE VEHICLE EQUIPMENT AND COUNTRY.

Examples of selections

Interpreting the display selected

e) Reset the tyre pressure.

Refer to the information on the “Tyre pressure

monitoring system” in Section 2.

+

Tyre pressure

f) Trip log.

No message

memorised

Successive display:

– information messages (passenger airbag OFF

etc.);

– operating fault messages (Check injection

system, etc.).

g) Estimated range with remaining reagent.

Top Up AdBlue

before 2400 km

Refer to the information on “Reagent tank” in

Section 1.

1.88

TRIP COMPUTER AND WARNING SYSTEM: information messages

These can help in the vehicle starting phase, or give information about a selection or a driving status.

Examples of information messages are given in the following pages.

Examples of messages

“Parking brake on”

Interpreting the display selected

Indicates that the parking brake has been applied.

“Checking control

functions”

Displayed with the ignition on when the vehicle is running self-diagnostics.

“Turn steering

wheel + START”

Turn the steering wheel slightly whilst pressing the vehicle start button to unlock the steering

column.

“Steering wheel

not locked”

Indicates that the steering column has not been locked.

1.89

TRIP COMPUTER AND WARNING SYSTEM: operating fault messages

soon as possible. If you fail to follow this recommendation, you risk damaging your vehicle.

They disappear when the display selection key is pressed or after several seconds and are stored in the computer log. The

Examples of messages

“Clean diesel filter”

Interpreting the display selected

Indicates the presence of water in the diesel filter; contact an approved Dealer

as soon as possible.

“Check lighting”

“Check vehicle”

Indicates a fault in the headlights.

Indicates a fault in one of the pedal sensors, battery management system or oil

level sensor.

“Check airbag”

Indicates a fault in the restraint system in addition to the seat belts. In the event

of an accident, it is possible that they may not be triggered.

“Check anti- pollution system”

– Indicates a fault in the vehicle’s particle filter system.

– Indicates a fault in the emissions reduction system when it is accompanied

by the

Section 1.



warning light. Refer to the information on “Reagent tank” in

1.90

TRIP COMPUTER AND WARNING SYSTEM: warning message

These appear with the ® warning light and require you to stop immediately, for your own safety, as soon as traf-

fic conditions allow. Stop your engine and do not restart it. Contact an approved Dealer.

Some examples of warning messages are given below. Note: the messages appear on the display either individually or al-

ternately (when there are several messages to be displayed), and may be accompanied by a warning light and/or a beep.

Examples of messages

“Engine failure hazard”

Interpreting the display selected

Indicates an injection fault, the vehicle’s engine has overheated or there is a

serious engine fault.

“Power steering fault”

Indicates a fault in the steering system.

“Braking system fault” or “Stop vehicle” Indicates a fault in the braking system. Apply the electronic parking brake ma-

nually and ensure that the vehicle is immobilised using a chock.

“Electric failure DANGER”

“Puncture”

Indicates a fault in the vehicle battery charging circuit (alternator etc.).

Indicates a puncture on the tyre displayed on the instrument panel.

1.91

VEHICLE SETTINGS CUSTOMISATION MENU (1/2)

Adjusting the settings

1

Select the function to modify:

a) Free wheel in ECO mode

(please refer to the information on

“Driving advice, ECO-driving” in

Section 2;

b) Auto door lock while driving;

c) Use handsfree card: open/close;

d) Indicator sound volume;

e) Internal welcome sound;

f) External welcome;

g) Automatic Cabin Light;

h) Rear wiper when rear gear engaged;

i) Driving style indicator.

Depending on the function, select “ON"

or "OFF" to activate or disable it and "+"

or "-" to adjust the volume of the indi-

cators.

Depending on the vehicle equipment,

this function allows you to activate/de-

activate and adjust some of the vehi-

cle’s functions.

Vehicles fitted with a

navigation system

Accessing the settings menu

With the vehicle at a standstill, using the

multimedia screen 1, select “Vehicle”,

“User settings” to access the various

settings.

For safety reasons, carry

out any adjustments when

the vehicle is stationary.

1.92

VEHICLE SETTINGS CUSTOMISATION MENU (2/2)

Adjusting the settings

Once a line has been selected, press

the switch 3 OK to adjust the function.

2

Browse using the control 4 to select the

function to adjust:

If you select either “PARKING ASSIST

VOLUME” or “LANGUAGE”, you will

have to make a further selection (sound

volume of the parking distance control

or instrument panel language). In this

case, make your selection and con-

firm it by holding the switch 3 OK – the

a) Free wheel in ECO mode

3

4

(please refer to the information on

“Driving advice, ECO-driving” in

Section 2;

b) Auto door lock while driving;

c) Unlock driver door only;

d) Rear wiper when rear gear engaged;

e) Front park assist;

f) Automaticmain beam lights;

g) Lane departure warning : VOLUME;

h) Lane departure warning : Sensitivity;

i) Rear park assist;

j) PARKING ASSIST VOLUME;

k) LANGUAGE;

l) Units;

m)Style;

n) COLOUR.

selected value is shown by a

front of the line.

To exit the menu, press the control 4

upwards or downwards. It may be nec-

essary to carry out this operation sev-

eral times.

~

in

Vehicles not fitted with a

navigation system

For further explanations of the Free

wheel function in ECO mode, refer to

the information on “Driving Advice,

ECO-driving” in section 2.

Accessing the settings menu on

display 2

With the vehicle at a standstill, press

and hold the switch 3 OK to access the

settings menu.

=

<

function activated

function deactivated

The vehicle settings personalisation menu cannot be used when driving. At speed

exceeding 12 mph (20 km/h), the instrumental panel display switches automati-

cally back to trip computer and warning system mode.

1.93

CLOCK AND EXTERIOR TEMPERATURE

External temperature

indicator

1

Special note:

When the exterior temperature is - 3 °C

to + 3 °C, the °C characters flash (sig-

nalling a risk of ice on the road).

The time and/or external tempera-

ture are displayed on the multifunc-

tion screen 1

Refer to the handbook for the equip-

ment.

External temperature

indicator

As ice formation is related

to climatic exposure, local

air humidity and temperature, the

external temperature alone is not

sufficient to detect ice.

If the electrical supply is cut (battery

disconnected, broken supply wire,

etc.), the clock will automatically

go back to the right time after a few

minutes once the system is capable

of receiving information GPS.

1.94

REAR VIEW MIRRORS (1/2)

Folding rear view mirrors

The door mirrors automatically fold in

when the vehicle is locked (switch 3 in

position B).

In any case, you can make the door

mirrors fold in (switch 3 in position C) or

fold out (switch 3 in position A).

Automatic mode is then deactivated. To

reactivate it, position switch 3 to B.

4

5

2

1

Welcome and goodbye function

(depending on the vehicle)

3

A

– From the multifunction screen, select

the “Vehicle” menu, then “User set-

tings”, “External welcome” and acti-

vate or deactivate the function (ON

or OFF);

B

C

Depending on the selected choice, the

door mirrors will fold out:

– when the ignition is next switched on

(function deactivated);

– upon detecting the RENAULT card

or upon unlocking the vehicle (func-

tion activated).

Exterior rear view mirrors

Adjustment

or

Select the door mirror using switch 2,

then use button 1 to adjust it to the de-

sired position.

– press and hold the 4 OK switch to

access the settings menu. Then

browse using control 5 to select the

“External welcome” menu.

Heated door mirrors

Mirror de-icing is carried out at the

same time as rear screen de-icing.

Please refer to the information

on “Manual air conditioning” and

“Automatic climate control”.

Objects observed in the

door mirror glass are actu-

ally closer than they appear.

For your safety, take this

into account in order to correctly

assess the distance before any ma-

noeuvre.

For safety reasons, carry

out any adjustments when

the vehicle is not being

driven.

1.95

REAR VIEW MIRRORS (2/2)

6

3

A

C

Special feature:

Interior rear view mirror

When the rear-view mirror has been

manually deployed or folded back, it is

possible to reset it to a usage position.

To do this, position the switch 3 to C.

A mechanical noise from the rear-view

mirror unit will be heard.

Rear view mirror with lever 6

When driving at night, to avoid being

dazzled by the headlights of the vehicle

behind, depress the little lever located

behind rear view mirror 6.

If it is not the case, place switch 3 to A

and then place switch 3 to C until the

mechanical noise of the rear-view

mirror is heard.

Rear view mirror without lever 6

The rear-view mirror automatically

darkens when you are being followed

by a vehicle using main beam head-

lights or in very bright lighting.

Depending on the vehicle, informa-

tion regarding the activation and

deactivation of the front passen-

ger airbag is displayed on the inte-

rior rear-view mirror (please refer to

information on “Child safety: front

passenger airbag deactivation/acti-

vation” in Section 1).

1.96

AUDIBLE AND VISUAL SIGNALS

Direction indicators

Move stalk 1 parallel to the steering

wheel and in the direction you are going

to turn it.

1

2

One-touch mode

When driving, it is possible that the

steering wheel may not be turned suf-

ficiently to return the stalk automatically

to its starting position.

A

In this case, briefly turn stalk 1 to the in-

termediate position, then release it: the

stalk returns to its original point and the

indicator light flashes three times.

Horn

Hazard warning lights

Press switch 2. This switch ac-

é

Press the steering wheel boss A to ac-

tivate the horn.

tivates all four direction indicators and

the side indicator lights simultaneously.

It must only be used in an emergency to

warn drivers of other vehicles that you

have had to stop in an area where stop-

ping is prohibited or unexpected or that

you are obliged to drive under special

conditions.

Headlight flasher

Pull stalk 1 towards you then release it

to flash the headlights.

Depending on the vehicle, the hazard

warning lights may come on automati-

cally under heavy deceleration. You can

switch them off by pressing switch 2.

1.97

EXTERIOR LIGHTING AND SIGNALS (1/6)

1

Dipped beam

headlights

1

k

2

Manual operation

Turn ring 3 until the symbol is opposite

mark 2. This indicator light on the in-

strument panel comes on.

Automatic operation

Turn ring 3 until theAUTO symbol is op-

posite mark 2: with the engine running,

the dipped beam headlights switch on

or off automatically depending on the

brightness of the light outside, without

any action on stalk 1.

3

Side lights

Turn ring 3 until the symbol is

opposite mark 2. This indicator light on

the instrument panel comes on.

Main beam headlights

With the dipped beam

headlights lit, push stalk 1. This indica-

tor light on the instrument panel comes

on.

š

á

To return to the dipped headlight posi-

tion, pull the stalk 1 towards you again.

Before driving at night: check that the electrical equipment is operat-

ing correctly and adjust your headlights. Refer to the information on

“Adjusting the headlight beams” in section 1. As a general precaution,

check that the lights are not obscured (by dirt, mud, snow or objects

being transported).

1.98

EXTERIOR LIGHTING AND SIGNALS (2/6)

Automatic main beam

headlights



4

Depending on the vehicle, this system

switches the main beam headlights on

and off automatically. It uses a camera

located behind the interior rear-view

mirror to detect vehicles that are being

followed and those coming in the oppo-

site direction.

The main beam headlights come on au-

tomatically if:

– exterior light is weak;

– no other vehicles or lighting are de-

tected;

– the vehicle speed is above approxi-

mately 25 mph (40 km/h).

Switching on

If any of the above conditions are not

fulfilled, the system switches to dipped

beam headlights.

Vehicle fitted with a navigation

system

From the multimedia screen, 4, select

the “Vehicle” menu, “Driving assist-

ance”, “Automaticmain beam lights”,

then choose “ON” or “OFF”.

The system may encounter difficul-

ties under certain conditions, inclu-

ding:

– extreme weather conditions (rain,

snow, fog, etc.);

– obstruction in front of the wind-

screen or camera;

The “automatic main beam

headlights” system should

under no circumstances be

– when a following or oncoming ve-

hicle has weak or hidden lighting;

– incorrect settings for the front

headlights;

used to replace driver atten-

tion and responsibility with regard

to vehicle lighting and adapting to

light, visibility and traffic conditions.

– reflective systems;

– ...

1.99

EXTERIOR LIGHTING AND SIGNALS (3/6)

– repeatedly press control 6 up or down

until you reach the “Automaticmain

beam lights” menu, then press the

OK switch 5;

1

2

– press the OK switch 5 again to acti-

5

vate or deactivate the function.

6

Activation/deactivation

To activate automatic main beam

headlights:

– turn ring 3 until the AUTO symbol is

opposite mark 2;

3

– push stalk 1.

Vehicles without a navigation

system

To deactivate automatic main beam

headlights:

Warning light

strument panel.



comes on the in-

– With the vehicle stationary, press

and hold the OK switch 5 to access

the settings menu;

– pull stalk 1 towards you;

– or turn ring 3 to a position other than

AUTO.

– repeatedly press the control 6 up

or down until you reach the “Driving

assistance” menu. Press the OK

switch 5;

Warning light

strument panel.



goes out on the in-

Note: make sure the windscreen is not

obscured (dirt, mud, snow, condensa-

tion etc.).

Each time you start the engine, pull

and then push the stalk 1 to reacti-

vate the system.

1.100

EXTERIOR LIGHTING AND SIGNALS (4/6)

Automatic main beam



Operating faults

When the message “Check lighting”

headlights (continued)

Operating faults

1

and warning light

flashes on the

When the message “Check auto li-

ghting” appears on the instrument

panel, the system is deactivated.

Consult an approved dealer.

instrument panel, this indicates that

there is a lighting fault.

Consult an approved dealer.

Switching off the lights

There are two possibilities:

– manually, move ring 3 to position 0;

– automatically, the lights will go out

when the engine is switched off, the

driver’s door is opened or the vehicle

is locked. In this case, the next time

the engine is started the lights will be

switched back on according to the

position of the ring 3.

3

Daytime running lights

function

The daytime running lights come on

automatically with no action on stalk 1

when the engine is started, and they go

off once the engine is switched off.

Lights-on reminder buzzer

A warning beep sounds when the driv-

er’s door is opened to warn you that the

lights are still on.

Using the portable naviga-

tion system at night in the

windscreen area below the

camera may disturb the op-

eration of the “automatic main beam

headlights” system (risk of reflection

on the windscreen).

1.101

EXTERIOR LIGHTING AND SIGNALS (5/6)

Welcome lighting under the door

mirrors

“See-me-home lighting”

function

This function allows you to briefly switch

on the dipped beam headlights (to pro-

vide light when opening a gate, etc.).

Welcome and goodbye

function

(depending on the vehicle)

With the function activated, the lights

located under the door mirrors come

on automatically upon detection of the

RENAULT card, upon unlocking the

vehicle or when opening a door.

Once the function is activated, the day-

time running lights and the rear side

light light up automatically upon detect-

ing the RENAULT card or when the ve-

hicle is unlocked.

With the engine and lights switched

off and the ring 3 in position 0 or

AUTO, pull the stalk 1 towards you: the

dipped beam headlights come on for

approximately 30 seconds. To increase

this duration, you may pull the stalk up

to four times (total time restricted to ap-

proximately two minutes). The mes-

sage “Follow-me home for _ _ _” along

with the time the lights will be on for is

displayed on the instrument panel to

confirm this action. You can then lock

your vehicle.

They switch off automatically:

– approximately one minute after li-

ghting up;

– approximately one minute after li-

ghting up;

– upon starting the engine;

or

– when starting the engine based on

the position of the lighting stalk;

– upon locking the vehicle.

or

Activating/deactivating the function

– upon locking the vehicle.

From the multimedia screen, select

“Vehicle”, “User settings”, “External

welcome”. Choose “ON” or "OFF” to

activate or deactivate the function.

To switch off the lights before they go

out automatically, turn ring 3 to any po-

sition, then return it to the AUTO posi-

tion .

1.102

EXTERIOR LIGHTING AND SIGNALS (6/6)

Rear fog lights

Turn centre ring 7 on the stalk

until the symbol faces mark 2, then re-

Switching off the lights

1



lease it.

Turn the ring 7 again until the mark 2

is opposite the symbol for the fog light

that you wish to switch off. The corre-

sponding indicator light on the instru-

ment panel goes out.

2

Operation of the fog lights depends on

the exterior lighting selected, and an in-

dicator light will light up on the instru-

ment panel.

The fog lights switch off when the exte-

rior lights are switched off.

Do not forget to switch off the fog lights

when they are no longer needed, to

avoid inconveniencing other road

users.

Cornering lights

(depending on vehicle)

7

Whenever the dipped beam headlights

are on and under certain conditions (at

speed, the steering wheel at an angle,

in forward gear, the indicator lights on,

etc.), when taking a corner one of the

front fog lights will come on to light the

inside of the bend.

Front fog lights

Turn centre ring 7 on stalk 1

until the symbol faces mark 2, then re-

g

lease it.

Operation of the fog lights depends on

the exterior lighting position selected,

and an indicator light will light up on the

instrument panel.

When driving in fog or snow, or

when transporting objects which are

higher than the roof, the headlights

do not come on automatically.

Switching on the fog lights remains

the responsibility of the driver: the

indicator lights on the instrument

panel inform you whether the fog

lights are lit (indicator light on) or not

(indicator light not on).

1.103

HEADLIGHT BEAM ADJUSTMENT (1/2)

Halogen bulb versions

For manual settings

Examples of positions for adjusting control A according to the load

5-seater version 5-seater version 7-seater

(Short chassis)

(Long chassis)

version

Driver alone or with front

passenger

0

A

Driver with one front

passenger, passengers at

the rear in the third row

-

1 or 2

3

1

2

3

On vehicles fitted with this function,

control A allows you to adjust the height

of the beams according to the load.

All seats occupied

1

3

Turn control A downwards to lower the

headlights and upwards to raise them.

Driver with passengers and

luggage (or load) reaching

the maximum permissible

all-up weight

For vehicles not fitted with a control A,

the headlight adjustment is automatic,

depending on the vehicle load.

Driver without passengers

and luggage (or load)

reaching the maximum

permissible all-up weight

3 or 4

4

The table below gives some examples. In all cases, adjust control A according to

the vehicle load so that the road can be seen and other drivers are not dazzled.

1.104

HEADLIGHT BEAM ADJUSTMENT (2/2)

LED versions

For manual settings

Examples of positions for adjusting control A according to the load

5-seater version 5-seater version 7-seater

(Short chassis)

(Long chassis)

version

Driver alone or with front

passenger

0

Driver with one front

passenger, passengers at

the rear in the third row

-

1 or 2

3

1

2

3

All seats occupied

1 or 2

2 or 3

Driver with passengers and

luggage (or load) reaching

the maximum permissible

all-up weight

Driver without passengers

and luggage (or load)

reaching the maximum

permissible all-up weight

3 or 4

4

The table below gives some examples. In all cases, adjust control A according to

the vehicle load so that the road can be seen and other drivers are not dazzled.

1.105

WINDSCREEN WASH, WIPE (1/6)

A

1

2

1

Efficiency of a wiper blade

B

Check the condition of the wiper

blades. How long they last depends

on you:

C

D

– it must remain clean: clean the

blade and the screen regularly

with soapy water;

E

– do not use it when the screen is

dry;

– free it from the screen when it has

not been used for a long time.

Special note

Vehicle fitted with intermittent

windscreen wipers

In any event, replace them as soon

as they begin to lose efficiency: ap-

proximately every year (refer to the

information on “Wiper blades: re-

placement” in section 5).

When driving the vehicle, the wiping

speed slows down whenever the ve-

hicle stops. For example, fast wiping

speed will slow to normal wiping speed.

As soon as the vehicle moves off,

wiping will return to the speed originally

selected.

A single sweep

A short push will trigger one sweep

of the wipers.

B stop

Precautions for using the

wipers

– In freezing or snowy weather,

clear the screen before starting

the wipers (risk of motor over-

heating);

C intermittent wiping

If stalk 1 is operated, it overrides and

cancels the automatic function.

The wipers will pause for several

seconds between sweeps. It is

possible to change the time be-

tween sweeps by turning ring 2.

D slow continuous wiping

E fast continuous wiping

– ensure that no objects are ob-

structing the travel of the blade.

Positions A, C and D are accessible

with the ignition on. Position E is

accessible only when the engine is

running.

1.106

WINDSCREEN WASH, WIPE (2/6)

When activating automatic wiping or

when increasing sensitivity, one sweep

of the blades is performed.

A

1

2

Note:

1

F

– the rain sensor is only intended as a

driving aid. In the event of reduced

visibility, the driver should manually

activate the wipers. In foggy weather

or during snowfalls, wiping is not au-

tomatically triggered and remains

under the driver’s control;

B

C

D

E

G

– in the event of temperatures below

zero, automatic wiping is not acti-

vated when the vehicle is started. It

is automatically activated as soon as

the vehicle exceeds a certain speed

(approximately 5 mph (8 km/h));

C automatic wiper function

When this position is selected, the

system detects water on the wind-

screen and triggers the wipers at a

suitable wiping speed. It is possi-

ble to change the triggering thresh-

old and the time sweeps by turning

ring 2:

– F : minimum sensitivity

– G :maximum sensitivity

The higher the sensitivity, the quic-

ker the wipers will react and the

faster the wipe.

Vehicle fitted with front

windscreen wiper rain sensor

The rain sensor is located on the winds-

creen, in front of the interior rear-view

mirror.

– do not activate automatic wiping in

dry weather;

– fully de-ice the windscreen before

activating automatic wiping.

A single sweep

A short push will trigger one sweep

of the wipers.

B stop

1.107

WINDSCREEN WASH, WIPE (3/6)

Operating fault

Special note

In the event of a malfunction of the au-

tomatic wiping, the wiper is set to inter-

mittent wiping. Contact an authorised

dealer.

When driving the vehicle, the wiping

speed slows down whenever the vehi-

cle stops. For example, fast wiping

speed will slow to normal wiping speed.

As soon as the vehicle moves off,

wiping will return to the speed originally

selected.

A

E

1

B

C

The operation of the rain sensor can be

disturbed in the event of:

– damaged windscreen wiper blades;

a film of water or traces left by a

blade in the sensor’s detection zone

may increase the response time of

the automatic wiper, or increase the

wiping frequency;

If stalk 1 is operated, it overrides and

cancels the automatic function.

D

Precautions

– In the event of ice, check whether the

blades are stuck to the windscreen

before operating the wiping mecha-

nism. If you activate the wipers while

the blades are stuck down with ice,

you may risk damaging both the

blade and the wiper motor.

– a windscreen with any chip or crack

level with the sensor, or a windscreen

D slow continuous wiping

E fast continuous wiping

covered in dust, dirt, insects, ice, the

use of washing wax and water-repel-

lent chemicals; the windscreen wiper

will be less sensitive or may even not

react at all.

– Do not activate the wipers on a dry

screen. This will lead to premature

wear or damage to the blades.

Positions A and D are accessible

with the ignition on. Positions C

and E are accessible only with the

engine running.

1.108

WINDSCREEN WASH, WIPE (4/6)

Specific front wiper position

(service position)

This position enables the blades to be

lifted to remove them from the winds-

creen.

Note:

Once the wipers have been switched

off, at least 1 minute after locking the

vehicle, it is possible to manually move

the blades. Do not force the blade arms

to move. This may risk damage to the

wiper motor, the arms and the blades.

This can be useful:

– to clean the blades;

After your intervention, to reposition the

blades correctly, make sure the blades

are resting on the windscreen, switch

on the ignition and activate the wiper

control.

– to release the blades from the winds-

creen in winter;

– replace the blades (refer to the

“Wiper blades: replacement” para-

graph in Section 5).

In the event of obstacles on the

windscreen (dirt, snow, ice, etc.),

clean the windscreen (including the

central area located behind the in-

terior rear view mirror) and the rear

screen before starting the wipers

(risk of motor overheating).

The blade on the driver’s side must

always be above the passenger blade.

If this is not the case, a quick sweep of

the windscreen wipers should be per-

formed once the vehicle is travelling at

over 4 mph (7 km/h).

With the ignition on and the engine off,

lower the windscreen wiper stalk to

position E (fast continuous wipe). The

wiper arms stop in a position away from

the bonnet.

If an object is preventing a blade

from moving, it may stop function-

ing. Remove the obstacle and react-

ivate the wiper using the wiper stalk.

To return the blades to position, make

sure they have been placed on the

windscreen, then move the stalk to po-

sition B (stop) with the ignition on.

Before switching on the ignition,

place the wipers on the windscreen.

Otherwise, there may a risk of damage

to the bonnet or the wipers when they

are switched on.

Before any action involving

the windscreen (washing

the vehicle, de-icing,

cleaning the windscreen,

etc.) return stalk 1 to position B

(stop).

Risk of injury and/or damage.

1.109

WINDSCREEN WASH, WIPE (5/6)

Note:

In temperatures below zero, the washer

liquid risks freezing to the windscreen,

thereby reducing visibility. Heat the

windscreen using the demister control

before cleaning.

A

1

B

C

D

E

Windscreen washer

With the ignition on, pull stalk 1 then

release.

A brief pull will trigger a single sweep

of the wipers, in addition to the wind-

screen washer.

A longer pull will trigger three sweeps

of the wipers followed, a few seconds

later, by a fourth, in addition to the wind-

screen washer.

When working in the engine

compartment, ensure that

the windscreen wiper stalk

is in position B (stop).

Risk of injury.

1.110

WINDSCREEN WASH, WIPE (6/6)

Note:

To ensure the headlight washers op-

erate correctly in winter, remove snow

from the jet trims and de-ice the jet

trims using an aerosol de-icer.

A

1

B

C

You are recommended to regularly

remove dirt encrusted on the headlight

glass.

When the windscreen washer fluid level

reaches minimum:

D

– the message “Windscreen wash fluid

shortage” is displayed on the instru-

ment panel;

E

– the headlight washer system may be

deprimed.

Headlight washers

Fill the windscreen washer fluid and

then activate the windscreen washer,

with the engine running, to reprime

the system.

Headlights on

On vehicles fitted with this, with the

engine running, hold stalk 1 pulled to-

wards you for about 2 seconds: the

headlight washers and windscreen

washers will be activated at the same

time.

The headlight washers are also acti-

vated after three prolonged movements

on the front windscreen washer control.

When working in the engine

compartment, ensure that

the windscreen wiper stalk

is in position B (stop).

Risk of injury.

1.111

REAR SCREEN WASH, WIPE (1/2)

To stop operation, twist the ring 3 again

to the off position.

1

NB: when washing using a roller type

car wash, return the ring 3 on the

stalk 1 to the stop position to deactivate

automatic wiping.

2

3

Efficiency of a wiper blade

Check the condition of the wiper

blades. How long they last depends

on you:

Follow usage recommendations.

– it must remain clean: clean the

blade and the screen regularly

with soapy water;

– do not use it when the screen is

dry;

– free it from the screen when it has

not been used for a long time.

Rear screen wiper

With the ignition on, turn ring 3

on stalk 1 to align the symbol with

mark 2.

In any event, replace them as soon

as they begin to lose efficiency: ap-

proximately every year (refer to the

information on “Wiper blades: re-

placement” in section 5).

Y

– stop;

Do not use the wiper arm to open or

close the tailgate.

– intermittent wiping.

Precautions for using the

wipers

– In freezing or snowy weather,

clear the screen before starting

the wipers (risk of motor over-

heating);

The wipers will pause for several

seconds between sweeps. Wiping

frequency varies with vehicle

speed;

Before any action involving

the rear screen (washing

the vehicle, de-icing, clean-

ing, etc.) return stalk 1 to

the stop position.

– slow continuous wiping.

– ensure that no objects are ob-

structing the travel of the blade.

Risk of injury and/or damage.

1.112

REAR SCREEN WASH, WIPE (2/2)

Activation/deactivation of the rear

screen wiper

In the event of obstacles present on the

rear window (dirt, snow, etc.), the wiper

will try to sweep away all the obstacles.

If an obstacle prevents the blade from

moving, it can be stopped. Remove the

obstacle, wait for around 30 seconds

and reactivate the wiper using the wiper

stalk.

1

Engaging reverse gear triggers inter-

mittent wiping (if the front wipers are in

operation). If your vehicle is fitted with

a vehicle settings customisation menu,

you can opt to activate or deactivate

this function. To do this, refer to the in-

formation on the “Vehicle settings cus-

tomisation menu” in Section 1; “Rear

wiping in reverse gear”.

Precautions

– In the event of ice, check that the

blades are not stuck to the wind-

screen before operating the wipers.

If you activate the wiper while the

blade is blocked by ice, you risk

damaging both the blade and the

wiping motor.

For vehicles not fitted with a settings

customisation menu, you can have this

function deactivated by an authorised

dealer.

Rear screen wash/wipe

With the ignition on, push and

p

– Do not operate the wipers on a dry

screen. This will lead to the prema-

ture wear or damage to the blades.

hold stalk 1, then release.

A longer action will trigger three sweeps

of the wipers followed, a few seconds

later, by a fourth, in addition to the wind-

screen washer.

1.113

FUEL TANK (1/3)

Diesel versions

Only use diesel fuel which complies

with the information on the label located

inside the cover 1.

1

Petrol versions

2

It is essential to use unleaded petrol.

The octane rating (RON) must comply

with the information given on the label

on the cover 1. Refer to the information

on “Engine specifications” in Section 6.

A

Useable tank capacity:

Fuel grade

– about 11 gal (50 litres) for short

chassis versions;

– about 11.6 gal (53 litres) for long

chassis versions.

Use a high-grade fuel that complies

with the legislation in force in each

country and which must comply with

the specifications given on the label

on the cover 1. Please refer to the in-

formation on “Engine specifications” in

Section 6.

With the vehicle unlocked, to open

cover 1, press area A then release. The

cover 1 opens.

Do not mix even small

amounts of petrol (un-

leaded or E85) with diesel.

Valve 2 is integrated into the filler pipe.

For details on filling the fuel tank, refer

to the information on “Filling with fuel”.

Never press valve 2 with

your fingers.

Do not use ethanol-based

fuel if your vehicle is not compatible

with this fuel.

Do not add anything to the fuel (ad-

ditive, reagent, etc.) to prevent the

risk of damaging the engine.

To close it, press on the fuel filler flap by

hand, as far as it will go.

Do not wash the filler

area with a high-pressure

washer.

1.114

FUEL TANK (2/3)

Filling with fuel

With the ignition off, insert the nozzle to

open valve 2 and insert it fully before

turning it on to fill the fuel tank (risk of

splashing).

Vehicle fitted with the Stop and

Start function

Keep the nozzle in this position through-

out the entire filling operation.

To fill up with fuel, the engine must

be stopped (and not on standby):

stop the engine (Please See

“Starting, stopping the engine” in

Section 2).

2

When the pump cuts out automatically

at the end of the filling procedure, a

maximum of two further filling attempts

may be made, as there must be suffi-

cient space in the fuel tank to allow for

expansion.

Make sure that no water enters the fuel

tank during filling. The valve 2 and its

surround must remain clean.

Petrol versions

Fuel types that conform to European

standards with which the engines of

vehicles sold in Europe are compat-

ible: refer to the “Engine specifica-

tions” in section 6.

Using leaded petrol will damage the

antipollution system and may lead to a

loss of warranty.

To ensure that the fuel tank is not filled

with leaded petrol, the fuel tank filler

neck consists of a restrictor fitted with

a safety system which only allows

a nozzle for unleaded petrol to be

used (at the pump).

Do not mix even small

amounts of petrol (un-

leaded or E85) with diesel.

Do not use ethanol-based

fuel if your vehicle is not compatible

with this fuel.

Do not add anything to the fuel (ad-

ditive, reagent, etc.) to prevent the

risk of damaging the engine.

1.115

FUEL TANK (3/3)

Running out of fuel on diesel

versions

Vehicles with key/remote control

No modifications what-

soever are permitted on

any part of the fuel supply

– Put the ignition key in “On” posi-

tion M (please see the information

on the “Ignition switch” in Section

2) and wait for a few minutes before

starting, to enable the fuel circuit to

be primed;

3

system (electronic units,

wiring, fuel circuit, injectors, pro-

tective covers, etc.) as this may be

dangerous (unless undertaken by

qualified Network personnel).

– turn the key to position D. If the

engine does not start, repeat the pro-

cedure.

– If the engine does not start after sev-

eral attempts, please contact an au-

thorised dealer.

Vehicles with RENAULT card

With the card RENAULT in the pas-

senger compartment, press the start

button 3 without pressing any of the

pedals. Wait a few minutes before start-

ing. This will enable the fuel circuit to

be primed. If the engine does not start,

repeat the procedure.

Persistent smell of

fuel

If you notice a persistent

smell of fuel you should:

– stop the vehicle as soon as traf-

fic conditions allow and switch off

the ignition;

– switch on the hazard warning

lights and ask your passengers

to leave the vehicle and to keep

away from traffic;

If the engine does not start after several

attempts, please contact an authorised

dealer.

– contact an authorised dealer.

1.116

REAGENT TANK (1/4)

Please ensure that you comply with the

legislation of your country.

It is important to remember that failure

to respect regulations in force could

lead to legal action being taken against

the vehicle owner.

Vehicle fitted with the Stop and

Start function

To fill up with reagent, the engine

must be stopped (and not on

standby): stop the engine (please

see “Starting, stopping the engine”

in Section 2).

A

1

Operating principle

The reagent is intended for diesel en-

gines fitted with the SCR (selective cat-

alytic reduction) system.

Using a reagent reduces the quantity of

nitrogen oxides in exhaust gases.

If the “XXX MILES (XXX

KM) Failure Top up AdBlue”

warning message appears,

fill the reagent tank and

refer to the filling instructions.

Reagent consumption in real time de-

pends on vehicle usage conditions, the

equipment fitted, and driving style.

Filling

Useable tank capacity:

Risk of immobilisation of the ve-

hicle.

– about 3.5 gal (16 litres) for short

chassis versions;

Reagent quality

Use only reagents which conform

to standard ISO 22241 and in accord-

ance with the mark on the tank filler

cap.

– about 3.7 gal (17 litres) for long

chassis versions.

With the ignition switched off, open the

cover A, then unscrew the cap 1.

Filler cap: this is specific.

If you have to replace it,

make sure it is identical to

the original cap. Contact

an approved Dealer. Do not wash

the filler area with a high pressure

washer.

Note: Ammonium hydroxide vapour

may escape from the cap opening

when the tank temperature is high.

1.117

REAGENT TANK (2/4)

Precautions for use

In extreme cold weather conditions

In frosty weather conditions, the rea-

gent tank should be refilled when the

The tank can be filled at the pump. In

other cases, it is essential to read the

information shown on the reagent con-

tainer (e.g. the can or bottle).



indicator and the message “Top

up AdBlue before 1200 km” appear on

the instrument panel.

After filling the reagent tank, check

that the cap and cover are closed,

start the engine and WAIT 10 sec-

onds with the vehicle stationary,

engine running before setting off

again.

If this operation is not carried out,

the filling of the tank will not be

taken into account automatically

until after several dozens of minutes

of driving.

When filling, handle the reagent care-

fully. They can damage clothes,

shoes, bodywork components etc.

Special cases

The reagent fluid freezes below about

-10°C.

If the reagent overflows, or contami-

nates any paintwork, clean the affected

area quickly with plenty of cold water

and a soft cloth.

In these conditions, do not attempt fill-

ing when the fluid is frozen. In the event

^{of needing to}^{top up or fill the tank}

on), park the ve-

Note: If the reagent crystallises, use a

soft sponge.

with reagent (

hicle in a hotter location if possible so

that the reagent becomes liquid again.

Otherwise, have a qualified profes-

sional top up or fill up with reagent fluid.

The message “--- Top up AdBlue”

and/or the warning lights will con-

tinue to appear until the filling has

been registered by the system.

No work whatsoever is

permitted on any part of

the system. To prevent

damage, only qualified per-

sonnel from our network may work

on the system.

The reagent must not come

into contact with eyes or

skin. If it does, wash the af-

fected area with plenty of

cold water. If necessary, consult a

doctor.

1.118

REAGENT TANK (3/4)

Maintenance/Range

The information displayed on the instrument panel may be accompanied by a beep.

Indicator

Message

lights

What to do?

–

“AdBlue Level Correct”

–

When the message is displayed when the ignition is switched

on, you have less than 1,488 miles (2,400 km) range.

Fill or have an Approved Dealer fill or top up the reagent in

the tank.

“Top Up AdBlue before 2400 km”

When the message is displayed when the ignition is switched

on, you have between 744 miles (1,200 km) and 496 miles

(800 km) range.

Fill or have an Approved Dealer fill or top up the reagent in

the tank.

“Top up AdBlue before 1200 km”

comes



on.

The message is displayed when the ignition is switched on and

is repeated:

– Approximately every 62 miles (100 km), you have between

about 496 miles (800 km) and 124 miles (200 km) range;

– Approximately every 31 miles (50 km), you have less than

124 miles (200 km) range.

“XXX MILES (XXX KM) Failure Top up

AdBlue”



comes

on.

In any event, fill or have an Approved Dealer fill the reagent

tank as soon as possible.

The engine will not start.

“0 MILES (0 KM) Failure Top up AdBlue”



flashes.

To restart, you must fill the reagent tank yourself.

1.119

REAGENT TANK (4/4)

System fault

When the indicator lights light up, this may be accompanied by a beep.

Indicator lights

Message

Readings

Indicates a fault in the system. Contact your approved

dealer as soon as possible.

“Check anti-pollution system”



and © come on.

Indicates a system fault and that in less than

496 miles (800 km) it will become impossible to

restart the vehicle.

These warnings are repeated:

– Every 62 miles (100 km) until there is around

124 miles (200 km) left before the vehicle cannot

be restarted;

– Every 31 miles (50 km) when there is less than

124 miles (200 km) left before the vehicle cannot

be restarted.

“XXX MILES (XXX KM) Failure antipollu-

tion”



and © come on.

Contact your approved dealer as soon as possible.

Indicates that after the ignition is switched off the ve-

hicle will not restart. Call an approved Dealer.

“0 KM Failure antipollution”



and © come on.

1.120

Getting to know your vehicle for Your Renault Scenic 4 Door Fourth Generation (2017-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals