Get Getting to know your vehicle -> Child seats: attachment by seat belt or by Isofix system Guide for Renault Scenic 4 Door Fourth Generation (2017-2022)

CHILD SEATS: attachment by seat belt (1/6)

Visual installation of the five-seater version

3

Check the status of the airbag

before fitting a child seat or allowing a

passenger to use the seat.

Seat not suitable for fitting

child seats.

2

¬

Seat which allows a child seat

with “Universal” approval to be attached

by a seat belt.

RISK OF DEATH OR

SERIOUS INJURY: before

installing a rear-facing child

Using a child safety system

which is not approved for

this vehicle will not correctly

seat in the front passen-

ger seat, make sure the airbag has

been deactivated (refer to the infor-

mation on “Child safety: front pas-

senger airbag deactivation/activa-

tion” in Section 1).

protect the baby or child.

They risk serious or even fatal injury.

1.51

CHILD SEATS: attachment by seat belt (2/6)

The table below summarises the information already shown on the diagram on the previous page, to ensure the applica-

ble regulations are respected.

Five-seater version

Front passenger seat

Weight of

Type of child seat

Rear side seats

Rear centre seat

Without airbag

or with airbag

deactivated

the child

With airbag

activated

Carrycot

across the vehicle

Group 0

fitted

< 10 kg

X

U (2)

U (3)

X

Rear-facing shell

seat

Groups 0 or 0 +

<

10 kg and

U (1) (5)

< 13 kg

Shell seat/rear-facing

seat

Groups 0+ and 1

< 13 kg and 9 to

18 kg

U (1) (5)

X

U (3)

X

Forward-facing seat

Group 1

9 to 18 kg

X

U (5)

U (3) (4)

X

Booster seat

Groups 2 and 3

15 to 25 kg and

22 to 36 kg

(1) RISK OF DEATH OR SERIOUS INJURY: before installing a rear-facing child seat in the front passenger seat,

make sure the airbag has been deactivated (refer to the information on “Child safety: front passenger airbag deactiva-

tion/activation” in Section 1).

1.52

CHILD SEATS: attachment by seat belt (3/6)

X = Seat not suitable for fitting child seats of this type.

U = Seat which allows a child seat with “Universal” approval to be installed using a seat belt; check that it can be fitted.

(2) A carrycot can be installed across the vehicle and will take up at least two seats. Position the child with his or her feet nearest

the door.

(3) If necessary, position the vehicle seat as far back as possible. Move the front seat as far forward as possible to install a rear-

facing child seat, then move back the seat in front as far as it will go, although without allowing it to come into contact with the

child seat.

(4) In all situations, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the

child seat. Please refer to the information on the “Rear headrests” in Section 3. Move the seat in front of the child forwards,

move the seatback forward to avoid contact between the seat and the child’s legs.

(5) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).

1.53

CHILD SEATS: attachment by seat belt (4/6)

The table below summarises the information already shown in the diagram on the following pages, to ensure the appli-

cable regulations are respected.

Seven-seat version

Front passenger seat

Row 2 rear

side seats

Row 2 rear 3rd row rear

Type of child seat

Weight of the child

centre seat

seats (5)

Without airbag

or with airbag

deactivated

With airbag

activated

Carrycot

across the vehicle

Group 0

fitted

< 10 kg

X

U (2)

U (3)

X

Rear-facing shell

seat

< 10 kg and < 13 kg

U (1) (6)

Groups 0 or 0 +

Shell seat/rear-facing

seat

Groups 0+ and 1

< 13 kg and 9 to

18 kg

U (1) (6)

X

U (3)

X

Forward-facing seat

Group 1

9 to 18 kg

X

U (6)

U (3) (4)

X

U (7)

U

Booster seat

Groups 2 and 3

15 to 25 kg and 22

to 36 kg

(1) RISK OF DEATH OR SERIOUS INJURY: before installing a rear-facing child seat in the front passenger seat,

make sure the airbag has been deactivated (refer to the information on “Child safety: front passenger airbag deactiva-

tion/activation” in Section 1).

1.54

CHILD SEATS: attachment by seat belt (5/6)

X = Seat not suitable for fitting child seats of this type.

U = Seat which allows a child seat with “Universal” approval to be installed using a seat belt; check that it can be fitted.

(2) A carrycot can be installed across the vehicle and will take up at least two seats. Position the child with his or her feet nearest

the door.

(3) If necessary, position the vehicle seat as far back as possible. Move the front seat as far forward as possible to install a rear-

facing child seat, then move back the seat in front as far as it will go, although without allowing it to come into contact with the

child seat.

(4) In all situations, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the

child seat. Please refer to the information on the “Rear headrests” in Section 3. Move the seat in front of the child forwards,

move the seatback forward to avoid contact between the seat and the child’s legs.

(5) Push the seat(s) in front of the child in a third row seat as far forward as possible.

(6) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).

(7) RISK OF DEATH OR SERIOUS INJURY: a child seat with a floor support must never be fitted.

1.55

CHILD SEATS: attachment by seat belt (6/6)

Installation diagram, 7-seater version

3

Check the status of the airbag

before fitting a child seat or allowing a

passenger to use the seat.

Seat not suitable for fitting

child seats.

2

¬

Seat which allows a child seat

with “Universal” approval to be attached

by a seat belt.

RISK OF DEATH OR

SERIOUS INJURY: before

installing a rear-facing child

Using a child safety system

which is not approved for

this vehicle will not correctly

seat in the front passen-

ger seat, make sure the airbag has

been deactivated (refer to the infor-

mation on “Child safety: front pas-

senger airbag deactivation/activa-

tion” in Section 1).

protect the baby or child.

They risk serious or even fatal injury.

1.56

CHILD SEATS: attachment using the isofix system (1/6)

Visual installation of the five-seater version



Seat which allows an ISOFIX

child seat to be fitted.

The rear seats are fitted with

an anchorage point which allows a

forward-facing ISOFIX child seat with

universal approval to be attached. The

anchorage points are located on the

backs of the rear seats.

Seat which does not allow a

child seat to be fitted.

Fit the child seat in a rear

seat wherever possible.

2

Fitting a seat ISOFIX in the

rear-left seat means the

middle seat cannot be used. The

central seat belt will no longer be

either accessible or useable.

RISK OF DEATH OR

SERIOUS INJURY: before

installing a rear-facing child

Using a child safety system

which is not approved for

this vehicle will not correctly

seat in the front passen-

ger seat, make sure the airbag has

been deactivated (refer to the infor-

mation on “Child safety: front pas-

senger airbag deactivation/activa-

tion” in Section 1).

To install an ISOFIX seat in this

seat, detach the central seat belt by

hand before engaging the bolts.

protect the baby or child.

They risk serious or even fatal injury.

1.57

CHILD SEATS: attachment using the ISOFIX system (2/6)

The table below summarises the information already shown on the diagram on the previous page, to ensure the regula-

tions in force are respected.

Five-seater version

Front passenger seat

Weight of

the child

Seat size

ISOFIX

Rear side

seats

Rear centre

seat

Type of child seat

Without airbag

or with airbag

deactivated

With airbag

activated

Carrycot fitted across

the vehicle

Group 0

< 10 kg

F, G

E

X

Rear-facing shell seat < 10 kg and

Groups 0 or 0 +

IL (1) (4)

IL (2)

< 13 kg

Shell seat/rear-facing

seat

Groups 0+ and 1

< 13 kg and 9

to 18 kg

C, D

IL (1) (4)

X

IL (2)

X

Forward-facing seat

Group 1

IUF - IL

(2) (3)

9 to 18 kg

A, B, B1

X

IUF - IL (1)

X

15 to 25 kg

and 22 to

36 kg

Booster seat

Groups 2 and 3

IUF - IL

(2) (3)

Seat i-Size

i-U (1) (4)

X

i-U

X

1.58

CHILD SEATS: attachment using the ISOFIX system (3/6)

X = Seat not suitable for fitting child seats of this type.

IUF/IL = On equipped vehicles, seat which allows an approved “Universal/semi-universal” or “vehicle specific” child seat to be at-

tached using the ISOFIX system; check that it can be fitted.

i-U = Suitable for “universal” front-facing and rear-facing i-Size restraint devices.

(1) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).

(2) If necessary, position the vehicle seat as far back as possible. Move the front seat as far forward as possible to install a rear-

facing child seat, then move back the seat in front as far as it will go, although without allowing it to come into contact with the

child seat.

(3) In all situations, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the

child seat. Please refer to the information on the “Rear headrests” in Section 3. Move the seat in front of the child forwards,

move the seatback forward to avoid contact between the seat and the child’s legs.

The size of the ISOFIX child seat is indicated by a letter:

– A, B and B1: for forward-facing seats in group 1 (9 to 18 kg);

– C and D: shell seat or rear-facing seats in group 0+ (less than 13 kg) or group 1 (9 to 18 kg);

– E: rear-facing shell seats in group 0 (less than 10 kg) or 0+ (less than 13 kg);

– F and G: cots in group 0 (less than 10 kg).

(4RISK OF DEATH OR SERIOUS INJURY:) before installing a rear-facing child seat in the front passenger seat,

make sure the airbag has been deactivated (refer to the information on “Child safety: front passenger airbag deactiva-

tion/activation” in Section 1).

1.59

CHILD SEATS: attachment using the isofix system (4/6)

The table below summarises the information already shown in the diagram on the following pages, to ensure the appli-

cable regulations are respected.

Seven-seat version

Front passenger seat

Weight of

the child

Seat size

ISOFIX

Row 2 rear Row 2 rear

side seats centre seat rear seats

3rd row

Type of child seat

Without

airbag or

with airbag

deactivated

With airbag

activated

Carrycot fitted across

the vehicle

Group 0

< 10 kg

F, G

E

X

Rear-facing shell seat < 10 kg and

Groups 0 or 0 +

IL (1) (4)

IL (2)

< 13 kg

Shell seat/rear-facing

seat

Groups 0+ and 1

< 13 kg and 9

to 18 kg

C, D

IL (1) (4)

X

IL (2)

X

Forward-facing seat

Group 1

9 to 18 kg

A, B, B1

X

IUF - IL (1) IUF - IL (2) (3)

15 to 25 kg

and 22 to

36 kg

Booster seat

Groups 2 and 3

Seat i-Size

i-U (1) (4)

X

i-U

X

1.60

CHILD SEATS: attachment using the isofix system (5/6)

X = Seat not suitable for fitting child seats of this type.

IUF/IL = On equipped vehicles, seat which allows an approved “Universal/semi-universal” or “vehicle specific” child seat to be at-

tached using the ISOFIX system; check that it can be fitted.

i-U = Suitable for “universal” front-facing and rear-facing i-Size restraint devices.

(1) Raise the seat to the maximum and position it as far back as possible, tilting the seatback slightly (approximately 25°).

(2) If necessary, position the vehicle seat as far back as possible. Move the front seat as far forward as possible to install a rear-

facing child seat, then move back the seat in front as far as it will go, although without allowing it to come into contact with the

child seat.

(3) In all situations, remove the rear headrest of the seat on which the child seat is positioned. This must be done before fitting the

child seat. Please refer to the information on the “Rear headrests” in Section 3. Move the seat in front of the child forwards,

move the seatback forward to avoid contact between the seat and the child’s legs.

The size of the ISOFIX child seat is indicated by a letter:

– A, B and B1: for forward-facing seats in group 1 (9 to 18 kg);

– C and D: shell seat or rear-facing seats in group 0+ (less than 13 kg) or group 1 (9 to 18 kg);

– E: rear-facing shell seats in group 0 (less than 10 kg) or 0+ (less than 13 kg);

– F and G: cots in group 0 (less than 10 kg).

(4RISK OF DEATH OR SERIOUS INJURY:) before installing a rear-facing child seat in the front passenger seat,

make sure the airbag has been deactivated (refer to the information on “Child safety: front passenger airbag deactiva-

tion/activation” in Section 1).

1.61

CHILD SEATS: attachment using the isofix system (6/6)

Visual installation of seven-seater version



Seat which allows an ISOFIX

child seat to be fitted.

The rear seats are fitted with

an anchorage point which allows a

forward-facing ISOFIX child seat with

universal approval to be attached. The

anchorage points are located on the

backs of the rear seats.

Seat which does not allow a

child seat to be fitted.

Fit the child seat in a rear

seat wherever possible.

2

Fitting a seat ISOFIX in the

rear-left seat means the

middle seat cannot be used. The

central seat belt will no longer be

either accessible or useable.

RISK OF DEATH OR

SERIOUS INJURY: before

installing a rear-facing child

Using a child safety system

which is not approved for

this vehicle will not correctly

seat in the front passen-

ger seat, make sure the airbag has

been deactivated (refer to the infor-

mation on “Child safety: front pas-

senger airbag deactivation/activa-

tion” in Section 1).

To install an ISOFIX seat in this

seat, detach the central seat belt by

hand before engaging the bolts.

protect the baby or child.

They risk serious or even fatal injury.

1.62

Getting to know your vehicle -> Child seats: attachment by seat belt or by Isofix system for Your Renault Scenic 4 Door Fourth Generation (2017-2022)

Related Topics

Popular Owner Manuals

Latest Owner Manuals