VEHICLE SETTINGS CUSTOMISATION MENU (2/2)
Adjusting the settings
Once a line has been selected, press
the switch 3 OK to adjust the function.
2
Browse using the control 4 to select the
function to adjust:
If you select either “PARKING ASSIST
VOLUME” or “LANGUAGE”, you will
have to make a further selection (sound
volume of the parking distance control
or instrument panel language). In this
case, make your selection and con-
firm it by holding the switch 3 OK – the
a) Free wheel in ECO mode
3
4
(please refer to the information on
“Driving advice, ECO-driving” in
Section 2;
b) Auto door lock while driving;
c) Unlock driver door only;
d) Rear wiper when rear gear engaged;
e) Front park assist;
f) Automaticmain beam lights;
g) Lane departure warning : VOLUME;
h) Lane departure warning : Sensitivity;
i) Rear park assist;
j) PARKING ASSIST VOLUME;
k) LANGUAGE;
l) Units;
m)Style;
n) COLOUR.
selected value is shown by a
front of the line.
To exit the menu, press the control 4
upwards or downwards. It may be nec-
essary to carry out this operation sev-
eral times.
~
in
Vehicles not fitted with a
navigation system
For further explanations of the Free
wheel function in ECO mode, refer to
the information on “Driving Advice,
ECO-driving” in section 2.
Accessing the settings menu on
display 2
With the vehicle at a standstill, press
and hold the switch 3 OK to access the
settings menu.
=
<
function activated
function deactivated
The vehicle settings personalisation menu cannot be used when driving. At speed
exceeding 12 mph (20 km/h), the instrumental panel display switches automati-
cally back to trip computer and warning system mode.
1.93
English 
