Get Driving -> Electronic parking brake Guide for Renault Zoe 4 Door Third Generation (2019-2024)

ELECTRONIC PARKING BRAKE (1/4)

1

To confirm that the electronic parking

brake is applied, the message “Parking

Brake ON” and warning light

}

on the instrument panel and warning

light 2 on the switch 3 light up.

After the engine is switched off, indi-

cator light 2 goes out several minutes

after the assisted parking brake has

2

been applied and indicator light

goes out when the vehicle is locked.

}

3

Assisted operation

Applying the electronic parking

brake

With the vehicle stationary, the elec-

tronic parking brake can be used to im-

mobilise the vehicle:

– by pressing the engine start/stop

button 1;

or

– when the driver’s seat belt is un-

fastened;

Before leaving the vehicle, check that the electronic parking brake is fully

applied. Warning light 2 on switch 3 and warning light on the in-

strument panel light up to show that the parking brake is applied but go

out when the doors are locked.

or

}

– when the driver’s door is opened;

or

– when the engine is stopped.

2.8

ELECTRONIC PARKING BRAKE (2/4)

Assisted operation

(continued)

1

Note: in some situations (electronic

parking brake failure, manual release of

the parking brake, etc.), a beep sounds

and the message “WARNING: Apply

Parking Brake” appears on the instru-

ment panel to warn you that the elec-

tronic parking brake has been released.

– with the engine running: when the

driver’s door is opened;

2

– with the engine off: when a front door

is opened.

3

In this case, pull and release switch 3 to

apply the assisted parking brake.

Manually releasing the electronic

parking brake

Manual operation

You can apply the electronic parking

brake manually.

Assisted release of the parking

brake

Press switch 1 without pressing the

pedals to switch the ignition on. Press

the brake pedal then press switch 3: in-

dicator light 2 on the switch and indica-

The brake will be released as soon as

the vehicle starts and accelerates.

Manually applying the electronic

parking brake

Pull switch 3. Warning light 2 and warn-

tor light

ment panel go out.

}

displayed on the instru-

ing light

light up.

}

on the instrument panel

Before leaving the vehicle, check that the electronic parking brake is fully applied. Warning light 2 on switch 3 and

warning light on the instrument panel illuminate to show that the parking brake is applied but switch off when

}

the doors are locked.

2.9

ELECTRONIC PARKING BRAKE (3/4)

To park, without applying the electronic

parking brake (if there is a risk of freez-

ing, for example):

1

– stop the engine by pressing the

engine Start/Stop button 1;

– release the driver’s seat belt;

– open the driver’s door;

2

– if necessary, position a chock in front

of or behind the wheels to ensure

that the vehicle is immobilised;

– manually release the electronic park-

ing brake (please see the informa-

tion on “Manually releasing the elec-

tronic parking brake” on the previous

page). The message “WARNING:

Apply Parking Brake” is displayed on

the instrument panel accompanied

by a beep to warn you that it is re-

leased (this is normal);

3

Brief stop

Hill parking

To apply the electronic parking brake

manually (when stopping at a red light,

or stopping when the engine is running,

etc.): pull and release the switch 3. The

brake is released as soon as the vehi-

cle is started up again.

When parking on a slope, pull the

switch 3 for a few seconds to enable

maximum application of the parking

brake.

– close the driver’s door and lock the

vehicle.

When parking on a slope

in conditions such as mud,

snow or ice, it is possi-

ble that the vehicle may

become displaced. Turn the wheels

so that the vehicle comes to rest

against a robust object (pavement

kerb, etc.).

2.10

ELECTRONIC PARKING BRAKE (4/4)

For safety reasons, automatic release

Operating faults

is deactivated when the driver’s door

is open or not shut properly and the

engine is running (in order to prevent

the vehicle from moving without the

driver). The “Release Parking Brake

Manually” message appears on the

instrument panel when the driver de-

presses the accelerator.

light illuminates on the instrument

panel accompanied by the mes-

sage “Check Parking Brake” and in

some cases the

appears. Contact your approved

Dealer straight away.

}

warning light

Never leave your vehicle

without moving the selec-

tor lever to position N, ap-

– If there is an assisted parking brake

fault, the warning ^light®

comes on, along with the message

“WARNING: Braking System”, a

beep and, in some cases, the warn-

plying the handbrake and

switching off the engine. This is be-

cause when the vehicle is stationary

with the engine running and a gear

engaged, the vehicle may begin to

move if you accelerate.

ing light

}

.

This means that you must stop as

soon as traffic conditions allow.

There is a risk of accidents.

If the message “WARNING:

Electric System” or “Check

battery” is displayed, you

must immobilise the vehicle

by pulling the switch 3 for approxi-

mately 10 seconds. If the slope and

the conditions require it, chock the

wheels of the vehicle.

If no lights or sounds are ap-

parent, this indicates a fault

in the instrument panel. This

indicates that it is essential

to stop immediately (as soon as traf-

fic conditions allow). Ensure that the

vehicle is correctly immobilised and

contact an approved Dealer.

Risk of loss of immobilisation of

the vehicle.

Call an approved Dealer.

2.11

Driving -> Electronic parking brake for Your Renault Zoe 4 Door Third Generation (2019-2024)

Related Topics

Popular Owner Manuals

Latest Owner Manuals