Instruments and warning/control lamps
●
The traffic sign detection system does not
work in all countries. Keep this in mind when
travelling abroad.
Dynamic Road Sign Display: please
clean the windscreen.
Second position. A second traffic sign may
be displayed in the second position, such as
a hazard warning sign, an overtaking prohibi-
tion or an alternative speed limit.
●
The windscreen is dirty in the camera area.
Clean the windscreen.
Shown on the display
Additional sign: If the windscreen wiper is
working while you are driving, the signal with
the additional rain sign will be shown first, on
the left, as it is the one that is applicable at
the time.
Dynamic Road Sign Display currently
restricted.
In Germany, on motorways and vehicle
roads, besides speed limits and overtaking
provisions the system also displays the end of
prohibition signs. The valid speed limit at the
time in other countries is always shown.
●
The navigation system is not transmitting
data. Check if the navigation system has up-
dated maps.
A sign valid only with restrictions, e.g. no over-
taking at certain times, may be displayed.
●
OR: the vehicle is in a region not included
The traffic signs detected by the system are
displayed on the dash panel display
on the navigation system's map.
Fig. 63 and, depending on the navigation
system fitted in the vehicle, on the infotain-
›››
Speed warning (depending on the instru-
ment panel)
No data available
●
The traffic sign detection system does not
ment system as well page 89.
›››
work in the current country.
If the system detects that the permitted
speed is exceeded, it may warn the driver
with a “gong” and visually with a message on
the dash panel display.
Hazard warning signs are not displayed in the
infotainment system.
Display of traffic signs
When the traffic sign detection system is con-
nected, a camera located on the base of the
interior rear-view mirror records the traffic
signs in front of the vehicle. After checking
and evaluating the information from the cam-
era, the navigation system and the current
vehicle data, up to two valid road signs are
displayed, with their corresponding addition-
al signs:
Road sign detection system messages:
Trailer mode
There are no traffic signs available
In vehicles equipped with a towing bracket
device from the factory and a trailer that is
electrically connected to the vehicle, it is
possible to activate or deactivate the display
of specific traffic signs for vehicles with trailer,
such as speed limits or overtaking prohibi-
tions. It can be activated or deactivated in the
infotainment system using the button > As-
sistants > Driver alerts > Road signs de-
●
●
The system is in its start-up phase.
OR: the camera has not recognized any
mandatory or prohibitive sign.
Error: Dynamic Road Sign Display
●
There is a fault in the system. Have the sys-
tem checked by a specialised workshop.
●
First position. The sign that is currently val-
id for the driver is shown in the screen. For ex-
ample, a maximum speed limit of 130 km/h
Speed warning currently unavailable
tect. > Consider trailer page 93.
›››
●
The speed warning function of the road
sign detection system is faulty. Have the sys-
tem checked by a specialised workshop.
(100 mph) Fig. 63.
›››
For trailer mode, the display of speed limits
applicable to the type of trailer or to the legal
»
77
English 
