Transport and practical equipment
Pulling out and securing the net partition
The red markings on the release buttons
should no longer be visible.
Using the net partition while the
rear seat backs are folded down
3 Valid for: LEON Sportstourer
●
2
Pull up handle Fig. 139
to remove the
›››
4
net from the casing
.
WARNING
●
Hook in the net partition on the right or left
●
Always secure objects, even when the
3
side
(magnified image).
net partition is properly assembled.
●
Hook in the net partition into the housing on
●
There should be nobody behind the as-
1
the other side
by pulling the rod.
sembled partition when the vehicle is mov-
ing.
The net partition is properly assembled when
the T-shaped ends are firmly secured in the
●
The attachments on the backs of the rear
seats must never be used to fit the net par-
tition when the rear seat backs are in their
vertical position.
3
1
corresponding housings
and
.
Retracting the net partition
●
3
Unhook the rod from the housings
and
CAUTION
Fig. 141 Assembling the net partition in the
rear seat backrests.
1
.
Incorrect handling of the net partition
could cause damage.
●
4
Roll up the net into the casing
lowering it
with your hand.
●
Do not “release” the net partition when
lowering it, as the net and other vehicle
parts could be damaged. Roll down the net
partition by hand.
Removing the net partition
●
Fold the rear seat backrests forward.
●
Press the left or right release catch
1
Fig. 140 in the direction of the arrow
.
›››
●
Remove the casing from the support in the
2
direction of the arrow Fig. 140
.
›››
Fitting the net partition
●
●
●
Fold the rear seat backrests forward.
Fig. 142 In the luggage compartment: net par-
tition hooked in place with the rear seat backs
folded down.
Fit the casing in the right and left supports.
Press the casing into the left and right sup-
»
ports in the opposite direction to the arrow
2
Fig. 140
until it engages.
›››
147
English 
