2021-2026 Seat Leon 4 Door Operation -> Mirrors User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Operation -> Mirrors for Your Seat Leon 4 Door Fourth Generation (2021-2026)

Visibility  
0
1
Rain sensor off.  
Windscreen crack: the impact of a stone  
Mirrors  
will trigger a single wipe cycle with the rain  
sensor on. Next the rain sensor detects the re-  
duction in the sensitive surface area and  
adapts accordingly. The behaviour of the  
sensor will vary with the size of the damage  
caused by the stone.  
Rain sensor on; automatic wipe if neces-  
sary.  
Interior mirror anti-dazzle function  
A
Setting sensitivity level of rain sensor  
Rear view mirror with automatic anti-daz-  
zle function  
Set control to the right: high sensitivity.  
Set control to the left: low sensitivity.  
The anti-dazzle function is activated every  
time the ignition is switched on.  
When the ignition is switched off and then  
back on, the rain sensor remains active and  
starts operating again when the windscreen  
1
WARNING  
The rain sensor may not detect enough rain  
to switch on the wipers.  
When the anti-dazzle function is enabled, the  
interior rear vision mirror will darken auto-  
matically according to the amount of light it  
receives. The anti-dazzle function is cancel-  
led if reverse gear is engaged.  
wipers are in position  
and the vehicle is  
If necessary, switch on the wipers man-  
travelling at more than 16 km/h (10 mph).  
ually when water on the windscreen ob-  
structs visibility.  
Modified behaviour of the rain sensor  
Possible causes of faults and mistaken read-  
WARNING  
Note  
ings on the sensitive surface Fig. 109 of the  
›››  
In the event that an automatic anti-dazzle  
rear vision mirror breaks, an electrolyte flu-  
id may leak. This could cause irritation to  
the skin, eyes and respiratory organs. If you  
come into contact with this liquid, it must  
be rinsed with large quantities of water. If  
necessary, get medial help.  
Regularly clean the sensitive surface of  
the rain sensor Fig. 109 (arrow) and  
›››  
check for possible damage to the wiper  
blades.  
rain sensor include:  
Damaged wipers: a film of water on the  
damaged blades may lengthen the activa-  
tion time, reduce the washing intervals or re-  
sult in a fast and continuous wipe.  
To remove wax and coatings, we recom-  
mend a window cleaner containing alco-  
hol.  
Insects: insects on the sensor may trigger  
the windscreen wiper.  
Do not put stickers on the windscreen in  
front of the rain sensor. This may cause  
sensor disruption or faults.  
CAUTION  
Salt on the road: in winter, salt spread on  
In the event that an automatic anti-dazzle  
rear vision mirror breaks, an electrolyte flu-  
id may leak. This liquid attacks plastic sur-  
faces. Clean it with a wet sponge as soon  
as possible.  
the roads may cause an excessively long  
wipe when the windscreen is almost dry.  
Dirt: dry dust, wax, coating on glass (Lotus  
»
effect) or traces of detergent (car wash) may  
reduce the effectiveness of the rain sensor or  
make it react more slowly, later or not at all.  
129  
Operation  
Synchronized regulation of the exterior  
mirrors  
Adjusting the exterior mirrors  
Note  
If the light falling on the interior mirror is  
In the infotainment system, the function but-  
ton > Vehicle > Interior > Mirrors can be  
used to select the exterior mirrors for  
synchronised adjustment.  
obstructed (e.g. with the sun blind), the an-  
ti-dazzle mirror with automatic adjustment  
will not operate perfectly.  
When the interior lights are on or reverse  
gear engaged, the mirrors do not darken  
with automatic adjustment for anti-dazzle  
position.  
1)  
Turn the knob to position L .  
Adjust the left-hand exterior mirror. The  
right exterior mirror will be adjusted at the  
same time (synchronised).  
If you have to stick any type of sticker on  
the windscreen, do not do so in front of the  
sensors. Doing so could prevent the anti-  
dazzle function from working well or even  
from working at all.  
If necessary, correct the right-hand rear-  
view mirror: rotate the control to position R1).  
Fig. 110 Detail of the driver's door: control for  
the exterior mirror.  
Tilt function for front passenger exterior  
mirror  
Turn the control to the corresponding posi-  
tion:  
When parking backwards, and in order to be  
able to see the kerb, the passenger side mir-  
ror can be automatically tilted towards the  
passenger to provide a better view of the  
kerb. The control must be in the position R1)  
for this feature to be operational.  
L/R Turning the knob to the desired position,  
adjust the mirrors on the driver side (L,  
left) and the passenger side (R, right) to  
the direction desired.  
Depending on the equipment fitted on  
the vehicle, the mirrors may be heated  
The mirror returns to its original position as  
soon as you drive forward at over 15 km/h  
(9 mph) or switch off the ignition. It also re-  
turns to its original position if the position of  
the control is adjusted.  
according to the outside temperature.  
Folding in mirrors.  
1)  
Regulation in right-hand drive vehicles is sym-  
metrical.  
130  
Visibility  
Storing the rear view mirror settings for the  
tilt function  
WARNING  
the exterior mirrors in to prevent them from  
being damaged. Electrically retractable  
exterior mirrors must not be folded in or out  
by hand, always use the electrical power  
control.  
Convex or wide-angle exterior mirrors give  
a larger field of vision. However, they make  
objects look smaller and further away than  
they really are. If you use these mirrors to  
estimate the distance to vehicles behind  
you when changing lane, you could mis-  
judge the distance. Risk of accident!  
Switch the ignition on.  
In the infotainment system, select > Ve-  
hicle > Interior > Mirrors page 93.  
›››  
Select the R1) position on the control.  
Note  
Select reverse gear.  
If the electrical adjustment should fail to  
Adjust the front passenger exterior mirror so  
operate, both of the mirrors can be adjus-  
ted by hand by lightly pressing the edge of  
the mirror glass.  
that you can see, for example, the kerb area  
well.  
WARNING  
Fold and unfold the exterior mirror, taking  
care to avoid injuries.  
Release the reverse gear.  
The fold-in function on the exterior mir-  
rors will not activate at speeds over  
40 km/h (25 mph).  
The adjusted position for the rear view mir-  
Only fold or unfold the exterior mirror  
ror is stored.  
when there is no-one in the way of the mir-  
ror.  
Fold the rearview mirrors when locking the  
vehicle  
When moving the mirror, take care not to  
trap fingers between the mirror and the  
mirror bracket.  
In the infotainment system, using the function  
button > Vehicle > Interior > Mirrors the  
exterior mirrors can be selected to fold in  
when the vehicle is parked and locked  
CAUTION  
If for any reason (e.g. a bump when ma-  
page 93.  
›››  
noeuvring) one of the rear view mirrors is  
knocked out of position, the mirrors must  
first be fully retracted with the electric  
control. The rear view mirror must not be  
placed by hand in the starting position, as  
the folding mechanism can be damaged.  
When the vehicle is locked with the remote  
control, the exterior mirrors are retracted au-  
tomatically. When the vehicle is opened with  
the remote control, the exterior mirrors are  
deployed automatically.  
Before washing the vehicle in an auto-  
matic car wash, please make sure to fold  
1)  
Regulation in right-hand drive vehicles is sym-  
metrical.  
131  

Related Topics

Popular Owner Manuals