Operation
LED on the power socket
USB power sockets
the integrated child lock will be unlocked
and the power socket will operate.
Depending on the equipment and the coun-
try, the vehicle may also have USB connec-
tions exclusively for charging or as a power
socket.
The ignition is switched off, but
there is enough power available
to continue supplying the socket
with current for a maximum of 10
minutes. If the connector is un-
plugged before this time elap-
ses, the socket is disconnected
and cannot be used again until
the ignition is switched on again.
●
Do not insert conductive objects (a knit-
ting needle, for example) into the 230 volt
power socket.
Flashing green
light:
These USB ports are located at the rear of
the console, between the front seats . These
connectors can work at a maximum power of
up to 10.5 W per port.
WARNING
The power socket works only when the igni-
tion is on. Improper use may cause serious
injury or even fire. Children should there-
fore not be left in the vehicle unattended if
the button is also left behind. Otherwise
there is a possibility that they may be in-
jured.
There is an anomaly, e.g. dis-
connection due to a current
surge or overheating.
They are not intended for file playback.
Flashing red
light:
230 volt power socket
With the engine running, the power socket
Disconnection due to overheating
Fig. 149 activates automatically as soon
›››
When the temperature exceeds a certain val-
ue, the 230 volt socket inverter is automati-
cally disconnected. The disconnection pre-
vents overheating when the power consump-
tion of the connected devices is excessive or
the ambient temperature is very high. The
230-volt power supply can be used once
again after a cooling time. First unplug the
connector of the connected device and then
plug it back in again. This prevents the elec-
trical device from being switched on again if
this is not wanted.
as a connector is plugged in. If there is
enough power available, the socket can still
CAUTION
Always use the correct type of plugs to
avoid damaging the sockets.
be used while the engine is off
›››
Connect an electrical device: Open the cov-
er and insert the plug into the power socket
as far as possible to unlock the built-in child
lock. The socket only supplies power once
the child lock is unlocked.
CAUTION
●
230 volt power socket:
–
Do not leave devices or connectors
that are too heavy (e.g. a transformer)
hanging directly from the power sock-
et.
LED on the power socket
Steady green
light:
The childproof lock is unlocked.
The socket is ready to operate.
–
–
Do not connect neon lamps.
WARNING
Only connect devices to the socket if
the device and socket voltage match.
The electrical system is under high voltage!
–
The built-in overload disconnect func-
tion prevents any electrical devices
that require a high start-up current
●
●
Do not spill liquids onto the socket.
Do not plug adapters or extension cords
into the 230 volt power socket. Otherwise,
154
English 
