北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
Thigh extension (if equipped)
s01aa0210
CAUTION
When the thigh extension is pulled out
to its fullest, do not put weight on the
top of it. Doing so could break the part.
S_103372-W
The seat front length can be adjusted.
Pull up the lever to adjust the length and
release the lever to lock it.
DRIVER’S SEAT MEMORY
FUNCTION (If Equipped)
s01aa03
WARNING
. To avoid loss of vehicle control or
personal injury, never perform the
following operations while driving.
– Adjusting the seat
– Retrieving the seat position
. Before adjusting the seat, make
sure that cargo or the hands and
feet of rear seat passengers are
clear of the adjusting mechanism.
. Perform the seat position retrieval
before driving. Be sure to confirm
that the select lever is in the “P”
position, and the parking brake is
applied, when adjusting the seat
position. Do not drive until the
retrieval of the seat position is
complete.
. When retrieving a registered seat
position, make sure the hands, feet
and possessions of rear seat
passengers are clear of the seat
adjusting mechanism.
. When any unusual conditions or
malfunctions occur during the re-
trieval of the seat position, stop the
retrieval of the seat position by
performing any of the following.
– Operate any of the power seat
switches.
– Press the “SET” button.
– Press button “1” or “2”.
– Operate the outside mirror
control switch.
Some seat positions can be registered.
Register the seat position with button “1”
or “2” or each of the key fobs and retrieve
the seat position.
The following seat positions can be
registered.
. Forward/backward position of the seat
. Angle of the seatback
. Angle of the seat cushion
. Height of the seat
. Angle of the outside mirrors
. Angle of the outside mirrors while the
vehicle is in reverse
NOTE
The seat position can also be retrieved
with the Distraction Mitigation System
user information. To do so, perform user
registration in the Distraction Mitigation
System settings. Refer to “Using the
Distraction Mitigation System” �P398.
Registration of memory posi-
tion with button “1” or “2”
s01aa0301
1. Adjust the seat position under the
following conditions.
. The parking brake is applied.
– CONTINUED –
SEAT, SEATBELT AND SRS AIRBAGS
41
1