北米Model "A2650BE-A" EDITED: 2025/ 6/ 27
LATCH), always ensure the seat
belt is threaded through the belt
guide to secure the child restraint
system.
CAUTION
When you install a child restraint
system, follow the manufacturer’s in-
structions supplied with it. After in-
stalling the child restraint system,
check to ensure that it is held securely
in position. If it is not held tight and
secure, the danger of your child
suffering personal injury in the event of
an accident may be increased.
CHOOSING A CHILD RE-
STRAINT SYSTEM
s01ag02
S_103090-MW
Choose a child restraint system that is
appropriate for the child’s age and size
(weight and height) in order to provide the
child with proper protection. The child
restraint system should meet all applic-
able requirements of Federal Motor Ve-
hicle Safety Standards for the United
States or of Canada Motor Vehicle Safety
Standards for Canada. It can be identified
by looking for the label on the child
restraint system or the manufacturer’s
statement of compliance in the document
attached to the system. Also it is impor-
tant for you to make sure that the child
restraint system is compatible with the
vehicle in which it will be used.
NOTE
Some sizes of child restraint systems
may not fit the vehicle seat. Before
purchasing a child restraint system,
check whether it fits on the vehicle seat.
WHEN INSTALLING THE FOR-
WARD FACING CHILD RE-
STRAINT SYSTEM ON THE
FRONT PASSENGER’S SEAT
s01ag15
WARNING
S_103091-MW
. NEVER INSTALL A REARWARD
FACING CHILD RESTRAINT
SYSTEM ON THE FRONT PAS-
SENGER’S SEAT. DOING SO
RISKS SERIOUS INJURY OR
DEATH TO THE CHILD BY PLA-
CING THE CHILD’S HEAD TOO
CLOSE TO THE SRS AIRBAG.
. The front passenger’s seat is not
equipped with tether anchors.
Therefore, when installing a child
restraint system that uses tether,
do not install it on the front
passenger’s seat.
SEAT, SEATBELT AND SRS AIRBAGS
70
English 
