2018-2026 Suzuki Jimny SUV INSPECTION AND MAINTENANCE -> Wiper blades User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

INSPECTION AND MAINTENANCE -> Wiper blades for Your Suzuki Jimny SUV Fourth Generation (2018-2026)

Wiper blades
54G129
If the wiper blades become brittle or dam-
aged, or make streaks when wiping,
replace the wiper blades.
To install new wiper blades, follow the pro-
cedures below.
NOTICE
To avoid scratching or breaking the
window, do not let the wiper arm
strike the window while replacing the
wiper blade.
NOTE:
Some wiper blades may be different from
the ones described here depending on
vehicle specifications. If so, consult a
SUZUKI dealer for proper replacement
method.
For windshield wipers:
78RB07040.
1) Hold the wiper arm away from the win-
dow.
INSPECTION AND MAINTENANCE
54G130
2) Squeeze lock (1) towards wiper arm (2)
and remove the wiper frame from the
arm as shown.
3) Unlock the lock end of the wiper blade
and slide the blade out as shown.
6-54
INSPECTION AND MAINTENANCE
(Removal)
78RB07045.
(Installation)
a
54G132
6-55
(3) Retainer
4) If the new blade is provided without the
two metal retainers, move them from
the old blade to the new one.
5) Install the new blade in the reverse
order of removal, with the locked end
positioned toward the wiper arm. Make
sure the blade is properly retained by
all the hooks. Lock the blade end into
place.
6) Reinstall wiper frame to arm, making
sure that the lock lever is snapped
securely into the arm.
For rear windshield wipers:
78R807047
(1) Lock end
(2) Blade rubber
1) Lift the rear wiper arm a little from the
rear window. Remove the wiper frame
from the rear wiper arm by pushing the
lock end (1) from the side of wiper
blade frame and then by pushing the
wiper frame to the direction of the arrow
with the lock end (1) free from locking in
the above illustration.
NOTE:
Return the rear wiper arm slowly after
removing the rear wiper blade.
77R60050
(3) Stopper
(4) Hook
(5) Retainer
2) Pull and remove the wiper blade rubber
from the wiper frame until the stopper
(3) of the wiper frame is taken out of the
hook (4). Remove the retainers (5) from
the wiper blade.
63R60160
3) If the new blade is provided without the
two metal retainers, install them from
the old blade to the new one.
,.....,
c
77R60030
4) Install the retainers along the direction
of camber as shown in the illustration.
INSPECTION AND MAINTENANCE
63R60180
5) Slide the new wiper blade into the wiper
frame. When installing the blade rub-
ber, put into the side that has no stop-
per on the wiper blade.
6-56
INSPECTION AND MAINTENANCE
77R60060
(6) Stopper
(7) Hook
6) Fix the wiper blade securely by pushing
· the hook (7) into the stopper (6).
7) Reinstall the wiper frame to the rear
wiper arm in the reverse order of
removal. Make sure that the rear wiper
blade is installed securely.
6-57
Windshield washer fluid
Check that there is washer fiuid in the tank.
Refill it if necessary. Use a good quality
windshield washer fiuid, diluted with water
as necessary.
NOTE:
SUZUKI highly recommends the use of
ECSTAR brand windshield washer fluid.
ECSTAR has been specially formulated for
your SUZUKI product and contributes to
the desired vehicle performance and ideal
driving experience.
A WARNING
Do not use radiator antifreeze in the
windshield washer reservoir. This
can severely impair visibility when
sprayed on the windshield, and also
can damage your vehicle's paint.
NOTICE
Damage may result if the washer
motor is operated with no fluid in the
washer tank.

Related Topics

Popular Owner Manuals