298
5-4. Using the driving support systems
Adjusting the set vehicle
speed
Canceling/resuming con-
trol
■ Adjusting the set vehicle
speed using the switches
To change the set vehicle
speed, press the “+” or “-” switch
until the desired speed is dis-
played.
1 Press the cancel switch or
driving assist switch to cancel
control.
Control will also be canceled if the
brake pedal is depressed.
2 Press the “RES” switch to
resume control.
1 Increase set vehicle speed
2 Decrease set vehicle speed
The set vehicle speed will
increase or decrease as follows:
■Automatic cancelation of the
cruise control
In the following situations, the cruise
control will be canceled automati-
cally:
Short press adjustment: By 1 mph
(1.6 km/h) or 1 km/h (0.6 mph)
each time the switch is pressed
●When the vehicle speed drops
approximately 10 mph (16 km/h)
or more below the set vehicle
speed
Long press adjustment: Increases
continuously while the switch is
pressed and held
●When the vehicle speed drops
below approximately 20 mph (30
km/h)
■ Increasing the set vehicle
speed using the accelerator
pedal
●When the brake control or output
restriction control of a driving sup-
port system operates (For exam-
ple: PCS, drive-start control)
1 Depress the accelerator
pedal to accelerate the vehi-
cle to the desired vehicle
speed.
●When the parking brake has been
operated
●Situations in which some or all of
the functions of the system cannot
operate: P.264
2 Press the “+” switch.
Owners Manual_USA_M42C01_en
English 
