2025-2026 Volvo EX30 4 Door Care and maintenance -> Attaching the towing eye User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Care and maintenance -> Attaching the towing eye for Your Volvo EX30 4 Door First Generation (2025-2026)

13.6.2. Attaching the towing eye  
Use the towing eye to attach a winch wire when towing.  
On the right-hand side of the car, the towing eye is screwed into a threaded socket behind a cover located on the front and rear  
bumpers.  
Important  
Be sure to read about towing and its limitations before you start.  
Fetch the towing eye so you have it at hand.  
1
Front towing eye fastening cover.  
To attach in the front: Remove the cover by pushing the middle of the left-hand side edge. The cover pivots around its  
centre line and can then be removed.  
Rear towing eye fastening cover.  
To attach in the rear: Remove the cover by pushing its top edge. Fold it out entirely and take it off.  
Screw the towing eye all the way into the socket.  
2
Important  
It is important that the towing eye is firmly screwed into place. Putting something through the towing eye, such as  
a wheel wrench, can give extra leverage.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
347 / 396  
After you're done, remember to remove the towing eye again and return it to its storage location.  
13.7. Raising the car  
You can raise one wheel off the ground at a time using a jack. Be sure to read all instructions before raising  
the car.  
Important  
It is very important to place the jack on the jacking points or the battery may get damaged.  
Recommended or supplied equipment  
The instructions for raising the car presume use of a jack recommended or supplied[1] by Volvo.  
Only use tools and equipment designed for your car model. Contact a Volvo dealer for tool recommendations.  
Volvo recommends an authorised Volvo workshop for tasks not described in the user manual.  
A portable jack designed for occasional and limited use is only suitable for short and urgent tasks, such as handling a  
puncture. A workshop jack is recommended for frequent or extended use.  
Only raise the car using its jacking points.  
Other lifting equipment  
If using lifting equipment not supplied by Volvo[2], carefully read their instructions before raising the car. Ensure that  
the equipment is compatible with the car.  
Use additional safety equipment such as axle stands and wheel blocks when applicable.  
If you're using a workshop jack, make sure that the jack plate is fitted with a rubber guard to protect the car as well as  
ensure that the car remains stable.  
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future  
instances. For more information, refer to the first page for the complete disclaimer note.  
348 / 396  

Related Topics

Popular Owner Manuals