13.2.8. Replacing front wiper blades
Your front wiper blades' service life is affected by the water, dirt and debris that they sweep off your
windscreen. The wiper blades need to be replaced when they show signs of wear.
Activate the wiper service position via settings in the display.
1
Fold the wipers up and away from the windscreen.
2
Press the button on the wiper arm and pull the blade straight out so that it's parallel with the wiper arm.
3
Make sure that the blade for the driver side is longer than the blade for the passenger side. Slide the new blade into the
4
wiper arm until you hear it click into place.
Check that the blade is firmly attached.
5
Fold the wiper arms back down against the windscreen.
6
Deactivate the wiper service position.
7
13.2.9. Replacing the rear wiper blade
Your rear wiper blade's service life is affected by the water, dirt and debris that it sweeps off your rear
windscreen. The wiper blade needs to be replaced when it shows signs of wear.
Grasp the centre of the wiper arm and lift it up and away from the rear windscreen. You may feel some resistance halfway
1
– this is the lock position. You need to pull the wiper arm past the lock position so that it doesn't fall back onto the
windscreen.
Put your thumbs on top of the wiper blade, underneath the wiper arm, and push down on the blade until it loosens and
2
comes away from the wiper arm.
Press the new blade into place until you hear a click.
3
Check that the blade is firmly attached to the wiper arm.
4
Fold the arm back down against the windscreen.
5
13.2.10. Activating the wiper service position
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future
instances. For more information, refer to the first page for the complete disclaimer note.
312 / 396
English 
