Open your car's bonnet.
1
2
Locate the blue cap with the washer fluid symbol and open it.
Pour the washer fluid into the reservoir. Avoid spillage if possible.
Close the cap and bonnet.
3
4
[1]
When there is about 1 litre (1 quart) left.
13.2.7. Cleaning wipers
Dirt, dust, sand, insects and different weather conditions are just a few of the things your wipers take care of.
It's important to clean your wipers regularly to maintain good visibility and prolong the blades' service life.
To access the front wiper blades, activate the wiper service position. This is available in the car's settings.
1
Rinse the area with water to get rid of any loose dust and dirt.
2
Use a soft sponge with a lukewarm soap solution or car shampoo to clean the area. Lift the wiper arms from the
3
windscreen for better access.
Use a clean, soft cloth to dry the wipers.
4
Make sure the wiper arms are folded back down against the windscreen and then deactivate the wiper service position.
5
Important
Test the wipers before driving. Use plenty of washer fluid when the wipers are in motion. The windscreen must be wet for
the wipers to work properly.
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future
instances. For more information, refer to the first page for the complete disclaimer note.
311 / 396
English 
