Get Care and maintenance -> Exterior cleaning and care Guide for Volvo EX30 4 Door First Generation (2025-2026)

13. Care and maintenance

Keep the interior and exterior of your car in good condition with regular care and maintenance.

This section of the manual covers regular care and cleaning you can do yourself, information about some of your car's compon-

ents that have specific maintenance needs and service maintenance information.

Note

Volvo's service programme

Adhering to your car's service programme is highly recommended. A car in good condition contributes to traffic safety

and operational reliability.

13.1. Car status

The car status view in the display is a useful aid for keeping track of your car’s health. This is where the car

shows you information about any detected issues.

The car status view shows a visual overview of your car and lists any detected issues. The issues are classified depending on

severity. A minor issue may be something you can sort out on your own, such as refilling washer fluid. A critical issue may re-

quire a workshop visit before you can safely drive the car again. It’s recommended to address issues as soon as they appear, es-

pecially if they’re not minor.

Important

The car is unable to detect and identify all types of issues that can occur. It is therefore important to regularly inspect the

car’s condition and address any service or maintenance needs you identify. Contact an authorised Volvo workshop for

guidance if you are unsure of an issue’s severity, regardless of whether it is indicated by the car or not.

To open the car status view, press the car symbol

in the bottom bar and go to Car status.

13.2. Exterior cleaning and care

The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future

instances. For more information, refer to the first page for the complete disclaimer note.

302 / 396

Keep your car's exterior in good condition by getting rid of dirt and taking care of any paintwork scratches as

soon as you notice them. Ensure good visibility by keeping wiper blades in good condition.

Wash your car regularly, top up the washer fluid when needed and replace the wiper blades when they get worn. Taking care of

your car's exterior doesn't just make it look nice, it also keeps your car in good condition.

13.2.1. Washing the exterior by hand

To avoid problems cleaning ingrained dirt, wash the car regularly and as soon as it starts getting dirty. It

reduces the risk of scratches and, of course, keeps your car looking good.

The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future

instances. For more information, refer to the first page for the complete disclaimer note.

303 / 396

Important

When and where to clean the exterior

Clean your car as soon as it has attracted dust or dirt. This prevents the build-up of ingrained dirt, which often

contains larger particles and debris that cause wear and damage, especially during cleaning.

Remove bird droppings and tree sap or resin as soon as possible. These contain substances that can quickly damage

and discolour the paintwork.

Avoid washing your car in direct sunlight. This can cause cleaning agents or wax to dry out and act as abrasives.

If the car has been exposed to corrosive substances, such as acid rain, salt, chemicals, iron powder, soot or ash, it

needs to be cleaned as soon as possible to prevent damage. In areas with a lot of industrial emissions, more frequent

washing is recommended.

Clean the car in a dedicated cleaning area that collects the wastewater and make sure the water is treated according

to environmental regulations. Make sure that there is an oil separator in the cleaning area.

High-pressure washing

Make sure that doors, windows and hatches are closed.

Use a circular motion and keep the nozzle at least 30 cm (1 foot) from the car's surface.

Do not spray directly onto openings or sensitive areas such as locks, cameras, trim, air intakes or the charging port.

Do not wash while charging

Do not wash your car if the charging cable is connected.

Note

Be gentle and use the right cleaning equipment for the type of surface you are washing.

Only use cleaning agents and car care products recommended by Volvo, and follow each product's accompanying

instructions.

Full exterior washing

Start by rinsing the underbody, including the wheel housings and bumpers.

1

Rinse the entire car to dissolve and wash away dirt. For particularly dirty surfaces, you can use a cold degreasing agent.

Then use a sponge, car shampoo and plenty of lukewarm water to wash the entire car.

2

3

4

Dry the car with a clean, soft chamois cloth or a gentle squeegee. This reduces the risk of stains from dried water droplets,

which require additional polishing.

Remove dirt from the drainage holes in the doors and clean out the door sills after washing the car.

If any bitumen stains from the road surface tarmac remain, use a tar remover to get rid of them.

5

6

The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future

instances. For more information, refer to the first page for the complete disclaimer note.

304 / 396

If there are particularly stubborn dirt patches or if you don't get the desired result when cleaning your car, contact Volvo support

for advice.

13.2.2. Washing the car in an automatic car wash

Volvo recommends that you wash the car by hand so that you can properly reach all parts of the car.

However, an automatic car wash is a simple way to quickly clean your car as soon as it gets dirty.

Note

Volvo recommends that you do not use an automatic car wash during the first few months, when the car is still new. This

allows the paintwork to harden properly.

Important

Before using an automatic car wash

Before driving up to the car wash, remember to:

check that doors and hatches are closed

disable the rear auto brake in the parking view

reduce the alarm sensitivity if you won't be inside the car while it's being washed

secure any auxiliary lights.

Once you're waiting to enter the car wash, activate car wash mode in settings to get your car ready. It will then:

close all windows

turn the wipers off

fold the wing mirrors in

activate air recirculation.

Remember to perform these steps manually if you are not using car wash mode.

Follow the instructions to drive into the automatic car wash and stop at the designated location.

1

If you are using a rollover car wash:

2

Put the gear in P to engage the parking brake.

If you are using a tunnel car wash:

Put the gear in N and take your foot off the brake. Do not apply the parking brake.

The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future

instances. For more information, refer to the first page for the complete disclaimer note.

305 / 396

Important

In a tunnel car wash, your wheels will need to be able to roll freely throughout the washing process. If auto hold is

activated during the wash, disable it by pressing the brake pedal firmly until the auto hold symbol disappears from

the display.

When the wash is completed, follow the instructions and drive out.

Car wash mode deactivates automatically when the car starts to pick up speed.

Be sure to reset any functions you changed manually before you drove in.

3

>

4

Warning

Always test the brakes after washing, including the parking brake. This helps prevent moisture from causing corrosion,

which could reduce the brakes' performance.

Note

To ensure that all car features are available to you, it is recommended that car wash mode is turned off before you reach a

public road.

13.2.3. Polishing and waxing

When your car loses its lustre, it's time for a new coat of polish. This gives the paintwork extra protection.

Feel free to wax your car whenever necessary, but you shouldn't need to polish it during its first year.

Important

Be careful

Do not use products intended for high-gloss paintwork and do not polish surfaces that have matte paintwork. This

may create a permanent gloss on the surface.

Polishing glossy trim mouldings could wear away or damage the glossy surface layer.

Avoid using polish or wax on rubber and unpainted plastic components.

Contact a Volvo dealer for information on recommended cleaning agents and car care products.

The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future

instances. For more information, refer to the first page for the complete disclaimer note.

306 / 396

Make sure the car is protected from direct sunlight. The surface should be no more than 45 °C (113 °F) when applying

polish or wax.

1

Wash and dry the car thoroughly.

2

3

First polish the car, then wax it. Follow the instructions on the packaging carefully. Many products contain both polish

and wax.

13.2.4. Touching up paintwork damage

Taking care of your car's paintwork helps to maintain the exterior. Inspect it regularly and repair damage

straightaway to avoid further problems.

Common damage that may occur includes stone chips, scratches and marks along the edges of doors or bumpers.

Important

Paintwork damage in front of a radar can affect the radar's detection capabilities. Contact a service point for repairs if you

find any damage close to the radars.^[1]If you're unsure about where your car's radars are, you can find an overview of

their locations in a separate section of this manual.

Note

Paint batches and brands may differ slightly in colour even if the colour code is the same. Therefore, even though fixing

these issues can be done on your own, Volvo recommends that you always contact an authorised Volvo workshop to get

help with any paintwork damage.

Contact a Volvo dealer for recommendations on touch-up pens and spray paints.

The surface must be clean and dry before doing any touch-ups.

The temperature of the surface should be at least 15 °C (59 °F).

Follow the instructions for the touch-up pen or paint you're using.

Apply masking tape over the damaged area. Then peel it off to remove all loose paint.

1

If there are uneven edges, you may need to gently polish around the damaged area using a very fine abrasive cloth. Clean

2

the area thoroughly afterwards and let it dry.

If the damage:

3

has not reached the metal and an undamaged layer of paint remains, you can apply touch-up paint directly to the

cleaned surface.

has reached the metal, first use a primer.

The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future

instances. For more information, refer to the first page for the complete disclaimer note.

307 / 396

is on a plastic surface, first use an adhesive primer for better results. Spray into the lid of the spray can and brush on a

thin layer.

is a long scratch, use masking tape around the damaged area to protect the undamaged paintwork.

Stir the primer thoroughly and apply with a fine brush, matchstick or something similar. Let it dry.

Finish with a basecoat and clearcoat.

4

5

[1]

Volvo recommends an authorised Volvo workshop for all servicing and repairs.

13.2.4.1. Finding the paint colour code

You can find the car body paint colour code on the product label located on a pillar between the front and

rear doors.

If there is damage to your car's paintwork, or it needs repairing or repainting, you need to know the exact colour of the paint.

1

Paint colour code

1

Go to the right-hand side of the car.

1

Open the front and rear doors.

2

3

Find the door pillar located between the front and rear doors.

The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future

instances. For more information, refer to the first page for the complete disclaimer note.

308 / 396

The product label containing the colour code is located on the outer side of the door pillar, near the bottom of it.

>

13.2.5. Windscreen damage

It's important to repair a damaged windscreen as soon as possible. If you take immediate action, minor chips

and cracks can often be repaired without replacing the entire windscreen.

Small cracks or chips

Small windscreen cracks or chips can quickly spread, turning it from minor to severe damage. Contact an authorised Volvo

workshop if you notice glass damage. Repair the windscreen as soon as possible.

Important

Camera and sensor area

Any windscreen damage in the camera and sensor area, including small chips, scratches or cracks, can negatively affect

forward detection and features that use it.

Any windscreen damage in this area requires inspection by a service technician.

Volvo recommends not repairing small damage in the camera and sensor area. Instead, the entire windscreen should

be replaced.

Severe glass damage

If the windscreen suffers severe damage, the entire glass panel needs to be replaced.

Warning

Compromised safety

Do not drive the car if there is structural damage to the windscreen. Weakened glass can degrade very quickly, impair vis-

ibility and seriously compromise safety.

The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future

instances. For more information, refer to the first page for the complete disclaimer note.

309 / 396

Note

Compatibility of new windscreen

It's important that the new windscreen and its installation meet Volvo's specifications for safety and compatibility with

the car's features.

Calibration

When a windscreen is installed, the forward-facing camera behind the glass requires function checks and calibration by a

service technician to ensure that it works correctly.

13.2.6. Refilling washer fluid

The washer fluid reservoir cap is located under the bonnet. Be sure to use good quality washer fluid.

The car notifies you when the washer fluid level is getting low.^[1]

Note

Reservoir capacity

Your car can hold 3.5 litres (approximately 3.7 US quarts) of washer fluid.

Important

Washer fluid quality

Use washer fluid with a pH between 6 and 8.

If you use concentrated washer fluid, dilute it as instructed on the packaging and use clean pH-neutral water.

Volvo recommends washer fluid with frost protection in cold conditions, especially in temperatures below freezing.

This is to prevent damage caused by the fluid freezing inside the pump, reservoir and hoses.

The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future

instances. For more information, refer to the first page for the complete disclaimer note.

310 / 396

Open your car's bonnet.

1

2

Locate the blue cap with the washer fluid symbol and open it.

Pour the washer fluid into the reservoir. Avoid spillage if possible.

Close the cap and bonnet.

3

4

[1]

When there is about 1 litre (1 quart) left.

13.2.7. Cleaning wipers

Dirt, dust, sand, insects and different weather conditions are just a few of the things your wipers take care of.

It's important to clean your wipers regularly to maintain good visibility and prolong the blades' service life.

To access the front wiper blades, activate the wiper service position. This is available in the car's settings.

1

Rinse the area with water to get rid of any loose dust and dirt.

2

Use a soft sponge with a lukewarm soap solution or car shampoo to clean the area. Lift the wiper arms from the

3

windscreen for better access.

Use a clean, soft cloth to dry the wipers.

4

Make sure the wiper arms are folded back down against the windscreen and then deactivate the wiper service position.

5

Important

Test the wipers before driving. Use plenty of washer fluid when the wipers are in motion. The windscreen must be wet for

the wipers to work properly.

The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future

instances. For more information, refer to the first page for the complete disclaimer note.

311 / 396

13.2.8. Replacing front wiper blades

Your front wiper blades' service life is affected by the water, dirt and debris that they sweep off your

windscreen. The wiper blades need to be replaced when they show signs of wear.

Activate the wiper service position via settings in the display.

1

Fold the wipers up and away from the windscreen.

2

Press the button on the wiper arm and pull the blade straight out so that it's parallel with the wiper arm.

3

Make sure that the blade for the driver side is longer than the blade for the passenger side. Slide the new blade into the

4

wiper arm until you hear it click into place.

Check that the blade is firmly attached.

5

Fold the wiper arms back down against the windscreen.

6

Deactivate the wiper service position.

7

13.2.9. Replacing the rear wiper blade

Your rear wiper blade's service life is affected by the water, dirt and debris that it sweeps off your rear

windscreen. The wiper blade needs to be replaced when it shows signs of wear.

Grasp the centre of the wiper arm and lift it up and away from the rear windscreen. You may feel some resistance halfway

1

– this is the lock position. You need to pull the wiper arm past the lock position so that it doesn't fall back onto the

windscreen.

Put your thumbs on top of the wiper blade, underneath the wiper arm, and push down on the blade until it loosens and

2

comes away from the wiper arm.

Press the new blade into place until you hear a click.

3

Check that the blade is firmly attached to the wiper arm.

4

Fold the arm back down against the windscreen.

5

13.2.10. Activating the wiper service position

The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future

instances. For more information, refer to the first page for the complete disclaimer note.

312 / 396

The wiper service position allows you to clean or replace the front wiper blades. When activated, the wipers

move to a more accessible position on the windscreen.

Press the car symbol

in the bottom bar and go to Settings.

1

Go to Controls → Mirrors and wipers → Wipers → Wiper service position.

Activate the service position.

2

3

The wipers move to a more accessible position and can be lifted up from the windscreen for servicing.

>

Important

Fold the wipers down

Be sure to fold the wipers back down against the windscreen after servicing them. Activation of the wipers when they are

in an elevated position can damage the car.

Once you have folded the wipers back down, deactivate the service position. This can be done by either of these options:

The setting in the display.

Start driving.

Start using the wipers or washers.

13.2.11. Corrosion protection

A good way to reduce the risk of corrosion is to keep your car clean. Your car also has durable corrosion

protection.

Normally, the corrosion protection doesn't require maintenance apart from regular cleaning and washing, which removes cor-

rosive substances. Avoid using strong alkaline or acidic cleaning solutions on glossy trim components as they can cause corro-

sion. Road surfaces with gravel or small stones can lead to paint chips that can act as entry points for corrosion. Deal with such

damage as soon as you notice it.

The car body's corrosion and abrasion protection consists of:

protective coatings, both on the sheet metal and applied in a high-quality painting process

shielding with plastic components

corrosion-resistant cast aluminium used for exposed components of the wheel suspension.

13.3. Interior cleaning and care

The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future

instances. For more information, refer to the first page for the complete disclaimer note.

313 / 396

Care and maintenance -> Exterior cleaning and care for Your Volvo EX30 4 Door First Generation (2025-2026)

Related Topics

Popular Owner Manuals

Latest Owner Manuals