Vacuum or dust the area to remove loose dust and dirt.
1
Use a clean microfibre cloth lightly dampened with water and clean the area with gentle circular motions.
2
Important
Never spray fluids directly on electrical components, such as buttons or controls.
Let the material dry fully before use.
3
13.3.4. Cleaning mats
Clean the mats regularly and always make sure they are properly in place.
Important
Be gentle
Never scrape or rub dirty surfaces. Instead, use gentle circular motions. Remember that sharp objects or abrasive materi-
als can damage the car.
Remove the mats for separate cleaning and access to the floor. Grasp the mat by the fastening pins and lift straight up.
1
Vacuum the mats and floor to remove loose dust and dirt. Do not shake or beat the mats to remove dust and dirt as they
2
can crack.
Clean the area with a neutral-coloured, clean microfibre cloth that is lightly dampened with water or a colourless, mild
3
cleaning agent. Use gentle circular motions.
Let the mat dry fully before putting it back. Fix it into place by pressing down near each pin.
4
Warning
Only use one mat for each seat and make sure they are properly fastened using all pins. If the driver's mat is not properly
attached, it can move around and endanger your driving by getting caught near or under the driver pedals.
13.4. Wheels and tyres
The content of this manual represents the status of the user manual at the time of printing and may not be completely valid in future
instances. For more information, refer to the first page for the complete disclaimer note.
317 / 396
English 
