03 Instruments and controls
Rear interior lighting
The lights are switched on or off by pressing
each respective button.
Home safe lighting
Approach lighting
When you leave your vehicle at night, you can
make use of the home safe lighting function
to illuminate the area in front of the vehicle.
Approach lighting activates the parking lights,
door mirror lights, license plate lighting, dome
lighting and door step lighting when you
approach the vehicle.
This function illuminates the headlights, park-
ing lights, lights in the door mirrors, license
plate lights, front ceiling lighting and footwell
lighting. These lights will remain on for 30 18
60 or 90 seconds. The time interval can be
This function is activated by pressing the
approach light button on the remote key (see
the illustration in Remote key – functions
(p. 153)).
,
03
set in MY CAR under Settings Car
The time interval for this lighting can be set
by pressing MY CAR and going to Car
settings Light settings Home safe
light duration. See My Car – introduction
(p. 76) for a description of the menu system.
settings Light settings Approach light
duration. See My Car – introduction (p. 76)
for a description of the menu system.
1. Remove the key from the ignition slot to
put the ignition in mode 0 (see Ignition
modes (p. 79) for information about the
ignition modes).
Rear reading lights
Related information
Home safe lighting (p. 97)
•
Cargo area lighting
The cargo area lighting comes on automati-
cally when the tailgate is opened.
2. Pull the turn signal lever as far as possible
towards the steering wheel and release it.
Related information
Front interior lighting (p. 96)
3. Exit the vehicle and lock the doors.
•
Related information
Approach lighting (p. 97)
•
18
Factory setting
97